Dieser Inhalt ist für Israel bestimmt. Unser System hat erkannt, dass Sie aus USA kommen. Wollen Sie USA als neues Land setzen?

VINNAPAS® 5010 N (GER)

VINNAPAS® 5010 N (GER)  is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives, renders, and trowelling compounds. It is based on a hard copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N which means that it has a neutral effect on rheology and provides the basic properties adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5010 N (GER) is part of our standard range, offering you the best-in-class solution for a wide variety of applications.

 


特性

  • VINNAPAS® 5010 N (GER) is a copolymer powder of vinyl acetate and ethylene and is dispersible in water. 
  • Compounds modified with VINNAPAS® 5010 N (GER) exhibit improved adhesion, flexural strength, deformability, abrasion resistance and are easier to process. Leveling, thixotropy and water retention are essentially unaffected. 
  • The product is ideal for use in combination with other mortar additives intended to enhance specific properties.
  • VINNAPAS® 5010 N (GER) contains a fine mineral filler as an antiblocking agent. 
  • It is produced without the addition of organic solvents, plasticizers and film-forming agents.
  • VINNAPAS® 5010 N (GER) has no effect on rheological properties and is a general-purpose powder in the upper Tg range. It is eminently suitable for formulating compounds of high ultimate strength and low emissions. 

VINNAPAS® 5010 N (GER)的特殊性能

  • 粘结各种难粘表面

For typical application fields of VINNAPAS® 5010 N (GER), refer to the section "application". Please discuss additional applications with your WACKER customer representative.

Processing 

For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 5010 N (GER) with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.


 

包装

25 kg paper bags
Big Bags or bulk on request.

储存

可再分散乳胶粉产品在储存期间必须进行防潮处理. 产品在高于30°C的温度下较长时间存放时, 尤其在此期间受压、受潮或受到日光照射后, 可能会出现结块现象. 产品在开封后应妥善地密封好后存放. 建议在仓库中存放可再分散乳胶粉产品, 并将其放置在阴凉干燥处. 可再分散乳胶粉产品的储存期不要超过六个月(自交付之日起算), 除非产品检测报告中规定了不同的日期（该日期优先适用）. 如果可再分散乳胶粉产品被存放的时间超过了建议的期限, 该产品可能仍然可以使用, 但是在这种情况下, 我们建议客户在使用该产品前对产品的性能是否满足预期用途的要求进行检测.

销售和支持

Wacker Chemie AG
Heilbronner Strasse 74
70191 Stuttgart
德国
+49  711  61942-0 （电话）
Contact Sales

我们可以为您提供什么帮助？

  • 您在选择产品方面需要帮助或者需要技术咨询？ 请联系我们的专家
Ask a question

您是否需要产品样本？

您可以在此处索取产品样本。

索取样本

Mehr Produkte

Bitte wählen Sie eine Anwendung um Ihnen passende Produkte anzeigen zu können.

购物车

我的媒体


转至订单表

联系方式

Wacker Chemie AG
Heilbronner Strasse 74
70191 Stuttgart
+49  711  61942-0 （电话）

收藏夹

我的产品