WETSOFT® CTA
特性
WETSOFT® CTA can be applied alone in diluted form or blended with organic softeners to impart hydrophilic properties to fibers and textiles. Before mixing with organic softeners, a compatibility test is recommended.
WETSOFT® CTA的特殊性能
- 用水稀释
数据表
WETSOFT® CTA can be applied as an aqueous dilution by padding as well as by the exhaust process.
10 - 20g/l WETSOFT® CTA are recommended for the padding application.
WETSOFT® CTA can easily be processed into stable emulsions. To do so, just mix WETSOFT® CTA with acetic acid and then stir with water. After mixing for about ten minutes, a milky emulsion is obtained. For easier incorporation of water and better stability of the end product, co-emulsifiers, e.g. diethylene glycol, propylene glycol, or glycerol, can be used.
Typical emulsion recipe:
- 20.0 parts WETSOFT® CTA
- 0.5 parts glacial acetic acid
- 7.0 parts diethylene glycol monobutylether
Mix these components homogeneously. Stir in 72.5 parts of water to obtain a stable microemulsion.
包装
WETSOFT® CTA is available in
- 200 kg drum
- 950 kg IBC
储存
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.