此内容适用于印度。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？
ELASTOSIL® VARIO 15
Pourable, addition-curing two-component silicone rubber that vulcanizes at room temperature.
Can be blended with ELASTOSIL® VARIO 40 to achieve any target hardness between 15 and 40 Shore A.
See our flyer:
"ELASTOSIL® VARIO MODULAR ADDITION CURING SYSTEM"
Eigenschaften
- Two base components, two catalysts
- Easy to process because of low viscosity
- Fast and non-shrink cure at room temperature, adjustable over a wide range
- Low hardness 15 Shore A
- High elongation, outstanding tensile strength
- Excellent tear strength
- Cured rubber is translucent and colorless
- Can be pigmented with 1 - 4 % ELASTOSIL® Pigment Pastes FL
Spezifische Merkmale von ELASTOSIL® VARIO 15
- 低粘度
- 加成固化
- 双组分
- 无化学收缩
- 易流动的
- 符合BfR
- 符合FDA
- 食品接触
Datenblätter
Due to its resistance to all common reproduction materials. e.g. casting resins, concrete, plaster, as well as the mechanical properties, ELASTOSIL® VARIO 15 is especially suitable for all molds.
As a low Shore A addition silicone rubber that cures without undergoing dimensional shrinkage, ELASTOSIL® VARIO 15 is also suitable if absolutely accurate copies of models are required.
Lagerung
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Vertrieb & Support
Wie können wir Ihnen helfen?
- Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.