此内容适用于印度。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？

WACKER® FINISH CT 46 E

WACKER® FINISH CT 46 E is a nonionic macro emulsion of a reactive, aminofunctional silicone fluid.


Eigenschaften

WACKER® FINISH CT 46 E is particularly suitable as softener for the impregnation of fibers and textiles. 

WACKER® FINISH CT 46 E imparts a very soft, drapable and elastic touch to woven and knitted fabrics. 

WACKER® FINISH CT 46 E is considered to be one of the best softening agents for PES/cotton fabrics. 

WACKER® FINISH CT 46 E improves the wash-and-wear properties and the crease recovery angle, sewability and tear strength and reduces abrasion loss. The effects are fast to washing and dry cleaning. 

WACKER® FINISH CT 46 E has very little effect on the degree of whiteness under usual application conditions. Generally, no adverse effect on the shade or color fastness properties of coloured goods is observed. As part of formulations used as fill fiber finish WACKER® FINISH CT 46 E imparts excellent slickness and resilience to the fiber.

WACKER® FINISH CT 46 E does not contain SVHC relevant impurities of more than 0.1% each, e.g. cyclics D4, D5 or D6.

Processing: 

WACKER® FINISH CT 46 E provides permanent effects even without the addition of a catalyst. No specific curing conditions are required if no resins are used. WACKER® FINISH CT 46 E can be applied by padding method, but the finishing liquors should not be exposed to high shear forces as this might cause instability. 5-30 g/l WACKER® FINISH CT 46 E are recommended for padding application. WACKER® FINISH CT 46 E can be applied either alone or together with resins and other finishing agents. Higher crease recovery angles and lower abrasion values can be obtained in resin finishes by using WACKER® FINISH CT 46 E. A wide range of fabric touches can be obtained by combining WACKER® FINISH CT 46 E with conventional softening agents and other additives such as fillers based on polyacrylate.

Typical recipe for woven and knitted materials from synthetic fibres:

0.5 ml/l acetic acid 60 %

10-30 g/l WACKER® FINISH CT 46 E

pad, liquor pick-up about 50 %, dry at about 130 °C

Lagerung

WACKER® FINISH CT 46 E is stabilized with 2-phenoxyethanol, which is approved for use in cosmetic products. Once opened packages should be used up quickly to prevent contamination by potentially introduced microorganisms.

The "Best use before end" date of each batch is shown on the product label. Emulsions showing signs of creaming should be agitated before use to assure uniform consistency. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Vertrieb & Support

Wacker Metroark Chemicals Pvt Ltd.
D.H. Road, Chandi
Kolkata 743503
Indien
+91  33  24072-100 (Phone)
+91 33 24072-502  (Fax)
Kontakt

Wie können wir Ihnen helfen?

  • Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Frage stellen

您是否需要产品样本？

您可以在此处索取产品样本。

索取样本

Distributoren

WACKER verfügt weltweit über ein Netzwerk fachkundiger Vertriebspartner. Bitte wählen Sie noch eine Anwendung aus damit wir Ihnen Ihre Ansprechpartner nennen können.

NANDHANAA CHEMICAL CORPORATION
22/2, Nandhanaa Nivas, Chinnamadathupalayam, Kundaiyanthottam (Via)
Perundurai – 638 052, Erode District
Tamil Nandu
+91-90470 86688 (Phone)
Kontakt Händler

Mehr Produkte

Produkte Technische Daten
pH-Wert Gehalt Aussehen
LIOSIL® HC 303 E US 4.5[1] 4.5[1] - - clear - slightly opaque clear - slightly opaque
POWERSOFT® PE 280 4.5 - 5[2] 4.5 - 5[2] approx. 25 %[3] approx. 25 %[3] clear to slightly yellowish clear to slightly yellowish
POWERSOFT® UP 70 LV 5.0 - 7.0[1] 5.0 - 7.0[1] approx. 60 %[4] approx. 60 %[4] extensively clear, colorless to slightly yellowish extensively clear, colorless to slightly yellowish
WACKER® FINISH CT 45 E approx. 5 approx. 5 approx. 40 %[4] approx. 40 %[4] milky, white milky, white
WACKER® FINISH CT 46 E 4.5 - 7.0[1] 4.5 - 7.0[1] 38.0 - 41.0 %[4] 38.0 - 41.0 %[4] milky white milky white
WACKER® FINISH CT 64 E approx. 5 approx. 5 approx. 61 %[5] approx. 61 %[5] colorless, opaque colorless, opaque
WETSOFT® LV 430 approx. 7 approx. 7 approx. 45 %[6] approx. 45 %[6] milky, white milky, white
WETSOFT® LV 500 5 - 8[1] 5 - 8[1] approx. 50 %[4] approx. 50 %[4] sligthly hazy, colourless sligthly hazy, colourless
WETSOFT® NE 430 - - approx. 44 %[4] approx. 44 %[4] milky-white macro emulsion milky-white macro emulsion
Legend
[1] pH-Wert | Indikatorstäbchen,  [2] pH Wert,  [3] Feststoffgehalt,  [4] Feststoffgehalt | Mikrowellenofen,  [5] Festgehalt | Mikrowellenofen,  [6] Solid content 

Bestellen

Meine Medien


Zum Bestellformular

Vertriebskontakt

Wacker Kimya Ticaret Limited Şirketi
Tevfik Fikret Cad. No: 32/4
34750 Ataşehir / Istanbul
+90  216  569-7050 （电话）

Meine Favoriten

Meine Produkte