此内容适用于英国。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？
PULPSIL® 683 E
PULPSIL® 683 E is a heavily concentrated, highly effective and easy dilutable silicone antifoam emulsion especially for the use in pulp mills.
特性
- very good long-term efficiency
- very good knock-down efficiency
- excellent drainability
- free of organic emulsifiers
数据表
In general we recommend stirring the emulsion before use (approx. 3 minutes with a propeller stirrer at 200 – 400 rpm). But be cautious: too high shear can break the emulsion.
PULPSIL® 683 E can be easily diluted with water to any desired concentration.
PULPSIL® 683 E is stable and highly effective, also at low concentrations, (additional stabilizer may be needed).
It is particularly recommended to use PULPSIL® 683 E for pulp washing (Kemi washer process) due to its excellent drainage properties.
The risk of "deposits" is particularly low when using PULPSIL® 683 E due to its very fine particle size distribution and stable emulsifier system, which increases the quality of the pulp produced.
During dilution other additives can be added to boost the formulation, if needed.
储存
Store in a dry place between 15°C and 25°C and protect against direct sunlight.
Minimum short-time temperature allowed during storage and transportation: 0°C
Maximum short-time temperature allowed during storage and transportation: 40°C
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable.
In this case however, the properties required for the intended use must be checked for quality assurance reasons.
销售和支持
Mumbai 400063
印度
+91 22 42365-570 （传真）
网站
经销商
未找到销售本产品的经销商
More products
There are no comparable products