This content is for United States. Our system has detected that you are from United States. Do you want to set United States as your new country?

This product is not available in United States. Please use the product search or contact us.

VINNACEL® 410

VINNACEL® 410 is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for block joint mortar. It is based on a hard copolymer of vinylacetate and ethylene that it has a neutral effect on rheology and provides the basic properties adhesion and workability, giving a high degree of formulation freedom.VINNACEL® 410 is part of our customized range, offering you the best-in-class solution for a wide variety of applications.


特性

VINNACEL® 410  is adispersible polymer powder based on vinylacetate-ethylene.

VINNACEL® 410 is a polymeric binder and is ideal for modifying cementitious drymix mortars, block jointing mortar.

It provides good workability  and adhesion.

VINNACEL® 410 contains a fine mineral filler as an antiblocking agent.

It is produced without the use of organic solvents, plasticizers and film-forming agents.

VINNACEL® 410 has no effect on rheological properties and is a polymer powder in the medium Tg range.

It is suitable for formulating block jointing mortar that feature good tensile adhesion strength.

For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNACEL® 410with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.

For typical application fields of VINNACEL® 410 refer to the following application table. Please discuss additional applications with your WACKER customer representative.

If VINNACEL® 410 is used in applications other than those mentioned, the choice, processing and use of VINNACEL® 410 is the sole responsibility of the purchaser. All legal and other regulations must be complied with. Slight color variations of the dispersible polymer powder may occur without impairing the product's functionality.

包装

25 kg paper bags

储存

可再分散乳胶粉产品在储存期间必须进行防潮处理. 产品在高于30°C的温度下较长时间存放时, 尤其在此期间受压、受潮或受到日光照射后, 可能会出现结块现象. 产品在开封后应妥善地密封好后存放. 建议在仓库中存放可再分散乳胶粉产品, 并将其放置在阴凉干燥处. 可再分散乳胶粉产品的储存期不要超过六个月(自交付之日起算), 除非产品检测报告中规定了不同的日期（该日期优先适用）. 如果可再分散乳胶粉产品被存放的时间超过了建议的期限, 该产品可能仍然可以使用, 但是在这种情况下, 我们建议客户在使用该产品前对产品的性能是否满足预期用途的要求进行检测.

销售和支持

Wacker Chemie India Pvt. Ltd.
Goregaon E,
Mumbai 400063
印度
+91  22  42365-500 （电话）
+91 22 42365-570  （传真）
Contact Sales
网站

我们可以为您提供什么帮助？

  • 您在选择产品方面需要帮助或者需要技术咨询？ 请联系我们的专家
Ask a question

您是否需要产品样本？

您可以在此处索取产品样本。

索取样本

经销商

瓦克在全球拥有专业的销售合作伙伴网络。 请选择一项应用，以便我们为您提供联系人。

Parkash Dye Chem
Ashok Vihar Road,Nr.Bharat Nagar
302543 New Delhi
91  11  2366700010 （电话）
经销商联系方式 网站
Ramniklal S. Gosalia & Co.
B. J. Marg, Jacob Circle
1347490 Mumbai
91  22  23063821 （电话）
91 22 23063827  （传真）
经销商联系方式 网站
Shah Enterprise
1014, Shantiniketan, 8, Camac Str.
1248272 Kolkata, West Bengal
经销商联系方式

More products

Products Technical data
Minimum film forming temperature
VINNAPAS® 4023 N (GER) 1 °C[1] 33.8 °F[1]
VINNAPAS® 4115 N (GER) 4 °C[1] 39.2 °F[1]
VINNAPAS® 4121 N 1 °C[1] 33.8 °F[1]
VINNAPAS® 5005 N 11 °C[1] 51.8 °F[1]
VINNAPAS® 5010 N (CTY) 4 °C[1] 39.2 °F[1]
VINNAPAS® 5010 N (GER) 4 °C[1] 39.2 °F[1]
VINNAPAS® 5012 T 4 °C[1] 39.2 °F[1]
VINNAPAS® 5028 E (CTY) 4 °C[1] 39.2 °F[1]
VINNAPAS® 5710 N (GER) (Scale-up Product) 4 °C[1] 39.2 °F[1]
VINNAPAS® 7031 H 0 °C[1] 32.0 °F[1]
Legend
[1] Minimum film forming temperature | DIN ISO 2115 

购物车

我的媒体


转至订单表

联系方式

Wacker Chemie India Pvt. Ltd.
Goregaon E,
Mumbai 400063
+91  22  42365-500 （电话）

收藏夹

我的产品