此内容适用于印度。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？
POWERSOFT® AE 18
POWERSOFT® AE 18 is a nonionic micro emulsion concentrate of an aminomodified silicone fluid.
特性
POWERSOFT® AE 18 is particularly suitable for the impregnation of fibers and textiles. POWERSOFT® AE 18 imparts a very soft, smooth and elastic touch to woven and knitted fabrics. POWERSOFT® AE 18 improves the wash-and-wear properties and the crease recovery angle and tear strength and reduces abrasion loss. The effects are fast to washing and dry cleaning.
POWERSOFT® AE 18 has very little effect on the degree of whiteness under usual application conditions. Generally, no adverse effect on the shade or color fastness properties of coloured goods is observed.
数据表
Processing:
POWERSOFT® AE 18 gives permanent effects even without the addition of a catalyst. Specific curing conditions need not be adhered to if no resins are used.
POWERSOFT® AE 18 can be applied either by padding or by the exhaust method. 5 - 30 g/l POWERSOFT® AE 18 are recommended for the pad method. For the exhaust method 1 - 3 %, relative to the weight of goods are adequate and the treatment should be carried out at 40 - 50 °C for 15 - 20 minutes. The pH of the liquor should not exceed pH 5. It may need to be adjusted with acetic acid. POWERSOFT® AE 18 can be applied either alone or together with resins and other finishing agents. If POWERSOFT® AE 18 is used together with crosslinking agents and other additives, it should be added, in diluted form, after all the other products. (This recommendation applies generally to the processing of all polysiloxanes). Higher crease recovery angles and lower abrasion values can be obtained in resin finishes by using POWERSOFT® AE 18. A wide range of touches can be obtained by combining POWERSOFT® AE 18 with conventional softening agents and other additives such as fillers based on polyacrylate.
Typical recipes:
Woven and knitted materials of synthetic fibres:
0.5 ml/l acetic acid 60 %
10-30 g/l POWERSOFT® AE 18
pad, liquor pick-up about 50 %, dry at 120-150 °C
Single jersey or interlock cotton fabrics (exhaust method):
0.5 ml/l acetic acid 60 %
2-4 g/l POWERSOFT® AE 18
10-30 minutes at 30-40 °C, without rinsing, hydroextract, dry at 100-150 °C
包装
- 0,5 kg bottle
- 25 kg hobbock
- 140 kg drum
- 950 kg IBC
储存
The "Best use before end" date of each batch is shown on the product label.
Emulsions showing signs of creaming should be agitated before use to assure uniform consistency.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
销售和支持
Kolkata 743503
印度
+91 33 24072-502 （传真）