SILRES® BS 50
SILRES® BS 50 is a solventfree, water-thinnable emulsion of a special silicone resin / polydimethylsiloxane blend. It is recommended as an additive for porous masonry coatings to make them water repellent. SILRES® BS 50 is particularly suitable for silicate emulsion paints and plasters.
数据表
SILRES® BS 50 is added undiluted to coatings either during or immediately after manufacture. We recommend adding 1-3 wt%.
SILRES® BS 50 is used as a water-repellent additive for silicate emulsion paints and whitewashes. By adding the water repellent, hydrophobic paints are obtained and the pigments are prevented from washing out, i. e. fading of the coatings is prevented. The durability of the paint is significantly increased.
SILRES® BS 50 is suitable as an additive to impart water repellency to mineral-based plasters, particularly to silicate emulsion plasters. It is recommend for lime and lime-cement plasters for the final layer of the plaster which should be 0.5 to 1cm thick. SILRES® BS 50 is added to the mixing water of the mortar preparation. Good water-repellent effect is obtained by adding 5-8 l/m³ finished mortar. The product will develop its effect as the plaster dries out.
储存
The "Best use before end" date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
销售和支持
Wacker Metroark Chemicals Pvt Ltd.
+91 33 24072-502 （传真）
Contact Sales
D.H. Road, Chandi
Kolkata 743503
印度
+91
33
24072-100
（电话）Kolkata 743503
印度
+91 33 24072-502 （传真）