此内容适用于德国。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？
ELASTOSIL® M 4503
Pourable, condensation-curing, two-component silicone rubber that vulcanizes at room temperature.
Main application: Making cost effective molds, particularly for casting PE resins.
Properties
- Good flow
- Low Shore A hardness (approx. 25)
- Great extensibility and elasticity
- High resistance to casting resins, particularly polyesters
Specific features of ELASTOSIL® M 4503
- 双组分
- 易流动的
- 缩合固化
Data sheets
Due to its good mechanical properties of the cured material as well as its high resistance to polyester resins, ELASTOSIL® M 4503 is particularly suitable as a mold-making material for reproducing models with very pronounced undercuts in polyester resins.
Other materials, such as plaster or wax, may also be cast without any problems from molds made of ELASTOSIL® M 4503.
ELASTOSIL® M 4503 is cured by adding 2 wt % Catalyst T 40. Pot life and curing time may be accelerated, and thus adjusted to suit the individual application by adding up to 4 wt % Catalyst T 40.
Further instructions for preparation and use are given in our brochure “Room Temperature Vulcanizing (RTV) Silicones
- Material and Processing Guidelines”.
Detailed information on other mold-making compounds in the ELASTOSIL ® M range is contained in our brochure “ELASTOSIL® M. Silicone Rubber for Mold Making”.
Storage
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Sales and support
Kolkata 743503
印度
+91 33 24072-502 (Fax)
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.