此内容适用于荷兰。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？
ELASTOSIL® M 4641 A/B
Pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature.
Main application: Vacuum casting for rapid prototyping especially suitable if crystal-clear casting resins are used.
Food contact (FDA/ BfR compliant).
特性
- Very good flow
- Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
- Medium Shore A hardness (approx. 43)
- Good transparency of the cured rubber
- High tear strength
- Outstanding resistance to casting resins, particularly polyurethanes and epoxies, for long service life of the molds
- Oil-free surfaces for crystal-clear resins
ELASTOSIL® M 4641 A/B的特殊性能
- 低粘度
- 出色的力学性能
- 加成固化
- 双组分
- 无化学收缩
- 易流动的
- 符合BfR
- 符合FDA
- 耐聚氨酯
- 表面干燥
- 食品接触
- 高透明度
数据表
High-performance silicone mold-making compound which is particularly suitable for reproducing models with undercuts in polyurethane or epoxy resins.
Main field of application:
Vacuum casting for rapid prototyping especially suitable if crystal-clear casting resins are used.
Detailed instructions for preparation and use are given in the brochure “Room Temperature Vulcanizing (RTV) Silicones - Material and Processing Guidelines”.
Important note:
The platinum catalyst is contained in component A.
Caution:
A and B components may only be used together if they have the same batch number.
储存
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.