此内容适用于越南。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？

POWERSIL® 466 A/B

POWERSIL® 466 A/B is a liquid silicone rubber with medium conductivity, stable electrical properties and good mechanical properties.


Eigenschaften

  • high elongation at break, low tension set
  • stable electrical properties
  • good mechanical properties
  • ready-to-use, two-component system

Spezifische Merkmale von POWERSIL® 466 A/B

  • elektrisch leitfähig
  • kaltschrumpfbar

POWERSIL® 466 A/B is suitable for production of electrically conductive injection moulded articles, especially cable accessories in the medium and high voltage range. The range of use spreads from push-on accessories to cold shrink applications. POWERSIL® 466 A/B combines a low Shore A durometer with high elongation, good setting properties (low tension set) and good mechanical properties which are a must for cold shrink applications.

Components A and B are delivered ready to use in drums of 20 and 200 litres capacity. They can be pumped by means of standard metering equipment from these drums and mixing in a static mixer straight into the heated mold.


The mixing ratio is 1 : 1. At room temperature, mixtures of A and B components have a pot life of at least three days.


For detailed information, refer to brochures on www.wacker.com.

 

Verpackung / Gebinde

This product is available in 20 kg pail and 200 kg drum kits.

Lagerung

The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Vertrieb & Support

Wacker Chemicals Middle East
Dubai Silicon Oasis s/n
0001 Dubai
阿拉伯联合酋长国
+971  4  709-9999 (Phone)
+971 4 709-9911  (Fax)
Kontakt

Wie können wir Ihnen helfen?

  • Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Frage stellen

Mehr Produkte

Produkte Technische Daten
Aussehen Härte Shore A Reißfestigkeit Reißdehnung Weiterreißwiderstand Druckverformungsrest
ELASTOSIL® LR 3002/35 A/B colourless colourless 33[1] 33[1] 7.0 N/mm²[2] 7.0 N/mm²[2] 460 %[3] 460 %[3] 29 N/mm[4] 29 N/mm[4] 11 %[5] 11 %[5]
ELASTOSIL® LR 3003/20 TR A/B transparent transparent 22[1] 22[1] 8.3 N/mm²[2] 8.3 N/mm²[2] 870 %[3] 870 %[3] 24 N/mm[4] 24 N/mm[4] 17 %[5] 17 %[5]
ELASTOSIL® LR 3003/30 A/B transparent transparent 30[1] 30[1] 7.0 N/mm²[2] 7.0 N/mm²[2] 610 %[3] 610 %[3] 21 N/mm[4] 21 N/mm[4] 10 %[5] 10 %[5]
ELASTOSIL® LR 3003/40 A/B transparent transparent 40[1] 40[1] 10.0 N/mm²[2] 10.0 N/mm²[2] 610 %[3] 610 %[3] 30 N/mm[4] 30 N/mm[4] 11 %[5] 11 %[5]
ELASTOSIL® LR 3003/50 A/B transparent transparent 50[1] 50[1] 10.3 N/mm²[2] 10.3 N/mm²[2] 490 %[3] 490 %[3] 26 N/mm[4] 26 N/mm[4] 13 %[5] 13 %[5]
ELASTOSIL® LR 3003/60 A/B transparent transparent 60[1] 60[1] 9.8 N/mm²[2] 9.8 N/mm²[2] 340 %[3] 340 %[3] 27 N/mm[4] 27 N/mm[4] 16 %[5] 16 %[5]
ELASTOSIL® LR 3003/70 A/B transparent transparent 70[1] 70[1] 9.3 N/mm²[2] 9.3 N/mm²[2] 290 %[3] 290 %[3] 20 N/mm[4] 20 N/mm[4] 16 %[5] 16 %[5]
ELASTOSIL® LR 3004/40 A/B transparent transparent 40[1] 40[1] 9.2 N/mm²[2] 9.2 N/mm²[2] 610 %[3] 610 %[3] 29 N/mm[4] 29 N/mm[4] 10 %[5] 10 %[5]
ELASTOSIL® LR 3005/60 A/B transparent transparent 60[1] 60[1] 9.5 N/mm²[2] 9.5 N/mm²[2] 380 %[3] 380 %[3] 28 N/mm[4] 28 N/mm[4] 15 %[6] 15 %[6]
ELASTOSIL® LR 3043/40 A/B transparent transparent 40[1] 40[1] 9.8 N/mm²[2] 9.8 N/mm²[2] 660 %[3] 660 %[3] 36 N/mm[4] 36 N/mm[4] 25 %[5] 25 %[5]
POWERSIL® 466 A/B black black 38[1] 38[1] 7.0 N/mm²[2] 7.0 N/mm²[2] 650 %[3] 650 %[3] 28 N/mm[4] 28 N/mm[4] 11 %[5] 11 %[5]
POWERSIL® 466 LV A/B black black 35[1] 35[1] 7.0 N/mm²[2] 7.0 N/mm²[2] 650 %[3] 650 %[3] 20 N/mm[4] 20 N/mm[4] 11 %[5] 11 %[5]
POWERSIL® 730 A/B white white 35[1] 35[1] 8.0 N/mm²[2] 8.0 N/mm²[2] 600 %[3] 600 %[3] 26 N/mm[4] 26 N/mm[4] - -
POWERSIL® 732 CS A/B transparent transparent 33[1] 33[1] 9.0 N/mm²[2] 9.0 N/mm²[2] 750 %[3] 750 %[3] 35 N/mm[4] 35 N/mm[4] - -
POWERSIL® 735 LIGHTGRAY A/B gray gray 39[1] 39[1] 8.0 N/mm²[2] 8.0 N/mm²[2] 500 %[3] 500 %[3] 30 N/mm[4] 30 N/mm[4] - -
POWERSIL® 740 DARK GRAY A/B gray gray 40[1] 40[1] 9.8 N/mm²[2] 9.8 N/mm²[2] 650 %[3] 650 %[3] 35 N/mm[4] 35 N/mm[4] - -
POWERSIL® 740 LIGHTGRAY A/B gray gray 40[1] 40[1] 9.8 N/mm²[2] 9.8 N/mm²[2] 650 %[3] 650 %[3] 35 N/mm[4] 35 N/mm[4] - -
POWERSIL® XLR® 630 A/B light gray light gray 35[1] 35[1] 7.0 N/mm²[2] 7.0 N/mm²[2] 450 %[3] 450 %[3] 25 N/mm[4] 25 N/mm[4] - -
Legend
[1] Härte Shore A | DIN ISO 48-4,  [2] Reißfestigkeit | ISO 37 Type 1,  [3] Reißdehnung | ISO 37 Type 1,  [4] Weiterreißwiderstand | ASTM D 624 B,  [5] Druckverformungsrest | 22 h | 175 °C | DIN ISO 815-1 Typ B Methode A | post-cured 6 h / 200 °C,  [6] Druckverformungsrest | 22 h | 175 °C | DIN ISO 815-1 Typ B Methode A 

Bestellen

Meine Medien


Zum Bestellformular

Vertriebskontakt

Wacker Chemicals Middle East
Dubai Silicon Oasis s/n
0001 Dubai
+971  4  709-9999 （电话）

Meine Favoriten

Meine Produkte