This content is for Netherlands. Our system has detected that you are from United States. Do you want to set United States as your new country?
ELASTOSIL® AUX BATCH PT 1
ELASTOSIL® AUX BATCH PT 1 is a catalyst paste for blending into the respective ELASTOSIL® R plus base compounds used for extrusion.
Eigenschaften
Datenblätter
ELASTOSIL® AUX BATCH PT 1 is suitable for the extrusion grades ELASTOSIL® R plus 43xx (e.g. 4305) and blended into the respective base on a clean and cooled open roller mill with low friction in a ratio of 1/100 to 2/100. The standard dosage is 1.5 parts calculated on 100 parts of base. Good homogenization is essential for a later good result in curing!
The pot life of the readily catalyzed mixtures is up to 24 hours depending on storage conditions. For extrusion material it is generally recommended to store the mixture for 1 hour after blending to support the transfer from physical to chemical dispersion of the catalyst.
CAUTION! Platinum catalysts are generally inhibited by heavy metals, sulphur, amines and other subsubstances causing desactivation of the catalyst! For this reason exposition or contact with these substances thus have to be strictly excluded during transport, storage and processing!
Lagerung
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Vertrieb & Support
34750 Ataşehir / Istanbul
Türkei
+90 216 569-8210 (Fax)
Wie können wir Ihnen helfen?
- Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.