此内容适用于乌干达。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？
VINNAPAS® 5005 N
VINNAPAS® 5005 N is a dispersible polymer powder for dry mix mortars, specifically suited for cost-efficient cementitious tile adhesives, wall and joint fillers. It is based on a very hard VA/E copolymer and belongs to the product class VINNAPAS® N which means that it has a neutral effect on rheology. VINNAPAS® 5005 N provides good adhesion strength very efficiently in tile adhesive at low polymer dosages.
特性
- VINNAPAS® 5005 N is a copolymer powder of vinyl acetate and ethylene and is dispersible in water.
- Mortars modified with VINNAPAS® 5005 N exhibit improved adhesion, flexural strength, deformability, abrasion resistance and are easier to process. Leveling, thixotropy and water retention are essentially unaffected.
- The product is ideal for use in combination with other mortar additives intended to enhance specific properties.
- VINNAPAS® 5005 N is a hard standard dispersible polymer powder with essentially no effect on rheological properties.
- VINNAPAS® 5005 N contains a fine mineral filler as antiblocking agent. It is produced without addition of organic solvents, plasticizers or filmforming agents.
数据表
For typical application fields of VINNAPAS® 5005 N, refer to the section "application". We recommend VINNAPAS® 5005 N in tile adhesives in a dosage of up to 2%. Please contact your WACKER customer representative to discuss possible formulations or additional applications.
Processing
For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 5005 N with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.
如果产品不是用于我们推荐的应用, 则购买者应对该产品的选择、加工和使用负全部责任. 此外还应遵守所有的相关法律法规.
可再分散乳胶粉的颜色可能会有略微的变化, 但不会对产品的功能造成影响.