此内容适用于德国。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？

很抱歉，本产品在德国无货。请使用产品搜索或联系 我们。

ELASTOSIL® A16 BLUE

ELASTOSIL® A16 BLUE is a solventless, one component, curable elastomer designed for electronic applications. Under normal conditions ELASTOSIL® A16 BLUE has a very long skin-over time. Once ELASTOSIL® A16 BLUE is in place on the substrate, the cure is induced by exposure to a combination of carbon dioxide and moisture.


Properties

  • Carbon dioxide cure acceleration
  • Can be silk screened
  • Excellent adhesion

Surface Preparation: The surface to be bonded should be properly prepared by cleaning with acetone, xylene, or other suitable solvent to remove all dirt and grease. The user must exercise care in selecting a cleaning solvent that is compatible with the materials to be bonded, and observe safety precautions in handling such solvents. Rubber surfaces should be lightly rubbed with sandpaper and then wiped clean with a cleaning solvent, usually acetone. The wet surface may be dried by wiping with a clean cloth or paper towel if necessary. ELASTOSIL® A16 BLUE is not recommended for use with acrylic or polycarbonate substrates.

 

After ELASTOSIL® A16 BLUE has been applied to the substrates, the cure may be accelerated and the adhesion enhanced by the application first of heat and then of moist CO2. Adhesion of a 5 mil coating to most substrates can be enhanced by treating for four (4) minutes at 120°F followed by four (4) minutes in a moist CO2 environment (40-50% humidity and 1-3% CO2). On particularly difficult substrates, longer oven cycles at temperatures up to 140°F may be required to develop adhesion.

Storage

The "Best use before end date" of each batch is shown on the Certificate of Analysis. Storage beyond the date specified on the Certificate of Analysis does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemie AG
Heilbronner Strasse 74
70191 Stuttgart
Germany
+49  711  61942-0 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

您是否需要产品样本？

您可以在此处索取产品样本。

索取样本

更多产品

个产品 技术数据
动态粘度 Shore density A 断裂伸长率
ELASTOSIL® A 4 21000 cP[1] 21000 cP[1] 50[2] 50[2] 100 % 100 %
说明
[1] 动态粘度 | 25 °C | WSTM-2103,  [2] Shore density A | WSTM-1110 

Order

My media


Go to order form

Sales Contact

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
+1  888  922-5374 （电话）

My favorites

My products