VINNAPAS® 4021 T
VINNAPAS® 4021 T is a copolymer powder of vinyl acetate and ethylene and is dispersible in water.
特性
-
Compounds modified with VINNAPAS® 4021 T exhibit improved adhesion, flexural strength, deformability and abrasion resistance and are easier to process.
-
Combinations with cement and gypsum can provide mortars which exhibit non-sag properties.
-
VINNAPAS® 4021 T contains a fine mineral filler as an antiblocking agent. It is produced without the use of organic solvents, plasticizers and film-forming agents.
-
VINNAPAS® 4021 T is a non-slump dispersible polymer powder in the medium Tg range. It is suitable for formulating compounds that must exhibit good non-slump properties.
数据表
For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 4021 T with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.
For typical application fields of VINNAPAS® 4021 T, refer to the "Application" section. Please discuss additional applications with your WACKER customer representative.
包装
Big Bags or bulk on request.
储存
销售和支持
Allentown, PA 18106-9346
美国
+1 517 264-4088 （传真）