Unser System hat erkannt, dass Sie aus USA kommen aber die aktuelle Ländereinstellung Aserbaidschan ist. Wollen Sie dennoch Ihr Land ändern?

Hausgeräteindustrie

Die besonderen Eigenschaften von Siliconen zeichnen die Produkte der Marke ELASTOSIL® als besonders geeignet für hochwertige Anwendungen aus, wie bspw. in „Weißer Ware“/Haushaltsgeräte, Klein- und Küchengeräte. Je nach Anwendung sind entweder raumtemperaturvernetzende oder bei Wärmeeinwirkung aushärtende Siliconelastomere die ideale Wahl.

Vorteile:

  • Hitzebeständigkeit (bis zu 300 °C)
  • chemische Beständigkeit
  • strahlungsbeständig (vom Mikrowellen- bis zum UV-Bereich)
  • dauerhafte Elastizität (–45 °C bis über 200 °C)
  • ökologische und physiologische Unbedenklichkeit

Anwendungen:

  • Geschirrspüler
  • Backofentüren
  • Waschmaschinen
  • Kochflächen
  • Kühlschränke

Product Recommendations

Table is scrollable
Products
Technical data
Product properties
Appearance Hardness Shore A Tensile strength Elongation at break Tear strength Viscosity, dynamic Weiterreißwiderstand Compression Set Resistance Regulation Product Rheology Specific Features Crosslinking Property Vulcanizate
ELASTOSIL® E41 TRANSPARENT - - 40[6] 40[6] 6,0 N/mm²[7] 6,0 N/mm²[7] 350 %[10] 350 %[10] - - 100000 mPa·s[3] 100000 mPa·s[3] 11,5 N/mm[1] 11,5 N/mm[1] - - - - Self-levelling - - -
ELASTOSIL® E43 N BLACK - - 30[6] 30[6] 7,5 N/mm²[8] 7,5 N/mm²[8] 500 %[11] 500 %[11] - - - - - - - - - - Thixotropic - - -
ELASTOSIL® E43 N TRANSPARENT - - 30[6] 30[6] 7,8 N/mm²[8] 7,8 N/mm²[8] 450 %[11] 450 %[11] - - - - - - - - - - Thixotropic - - -
ELASTOSIL® E43 SCHWARZ - - 30[6] 30[6] 6,5 N/mm²[9] 6,5 N/mm²[9] 500 %[12] 500 %[12] - - 250000 mPa·s[4] 250000 mPa·s[4] 11,5 N/mm[1] 11,5 N/mm[1] - - - Solvent-free - - - -
ELASTOSIL® E43 TRANSPARENT - - 30[6] 30[6] 6,50 N/mm²[7] 6,50 N/mm²[7] 500 %[10] 500 %[10] - - 250000 mPa·s[5] 250000 mPa·s[5] 11,5 N/mm[1] 11,5 N/mm[1] - - - Solvent-free - - - -
ELASTOSIL® E47 TRANSPARENT - - 37[6] 37[6] 4,5 N/mm²[9] 4,5 N/mm²[9] 450 %[12] 450 %[12] - - 600000 mPa·s[5] 600000 mPa·s[5] 10 N/mm[1] 10 N/mm[1] - - - MIL-A 46106 grade Non-slump, Thixotropic - - -
ELASTOSIL® E50 N TRANSPARENT - - 35[6] 35[6] 2,6 N/mm²[8] 2,6 N/mm²[8] 200 %[11] 200 %[11] - - - - - - - - - MIL-A 46106 grade - - - -
ELASTOSIL® LR 3003/30 R A/B transparent transparent 30[6] 30[6] 7,5 N/mm²[8] 7,5 N/mm²[8] 600 %[11] 600 %[11] - - - - 20 N/mm[1] 20 N/mm[1] 10 %[13] 10 %[13] - - - Food-contact, Reduced volatile content - -
ELASTOSIL® RT 702 - - 40[6] 40[6] 6,1 N/mm²[8] 6,1 N/mm²[8] 500 %[11] 500 %[11] 10,1[2] 10,1[2] - - - - - - Heat resistant - Thixotropic - One-component Self-adhesive
ELASTOSIL® RT 771 - - 45[6] 45[6] 1 N/mm²[8] 1 N/mm²[8] 180 %[11] 180 %[11] - - - - - - - - Media resistant - Shear thinning, Thixotropic - Condensation-curing, Two-component Self-adhesive, Electrically insulating
ELASTOSIL® RT 772 - - 32[6] 32[6] 2,0 N/mm²[8] 2,0 N/mm²[8] 130 %[11] 130 %[11] 3,8 N/mm[2] 3,8 N/mm[2] - - - - - - Heat resistant, Steam resistant - - - Condensation-curing, Two-component Self-adhesive, Electrically insulating
ELASTOSIL® RT 773 - - 35[6] 35[6] 1,2 N/mm²[8] 1,2 N/mm²[8] 75 %[11] 75 %[11] 4,7 N/mm[2] 4,7 N/mm[2] - - - - - - Media resistant - Shear thinning, Thixotropic, Non-slump - Condensation-curing, Two-component Self-adhesive, Compressible, Low density, Electrically insulating
ELASTOSIL® RT 778 - - 50[6] 50[6] 3,5 N/mm²[8] 3,5 N/mm²[8] 120 %[11] 120 %[11] 7,0[2] 7,0[2] - - - - - - Heat resistant - Shear thinning, Non-slump - Condensation-curing, Two-component, Fast curing at room temperature Self-adhesive, Electrically insulating
Legend
[1] Weiterreißwiderstand | ASTM D 624 B,  [2] Tear strength | ASTM D 624 B,  [3] Viscosity, dynamic D = 1 1/s | 25 °C | DIN EN ISO 3219,  [4] Viscosity, dynamic D = 0,5 1/s | 25 °C | DIN EN ISO 3219,  [5] Viscosity, dynamic D = 0.5 1/s | 25 °C | DIN EN ISO 3219,  [6] Hardness Shore A | DIN ISO 48-4,  [7] Tensile strength | ISO 37 type 1 | Type 3 / 23°C / 2mm,  [8] Tensile strength | ISO 37 type 1,  [9] Tensile strength | ISO 37 type 1 | Type 3 /23°C / 2mm,  [10] Elongation at break | ISO 37 type 1 | Type 3 / 23°C / 2mm,  [11] Elongation at break | ISO 37 type 1,  [12] Elongation at break | ISO 37 type 1 | Type 3 /23°C / 2mm,  [13] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A | post-cured 6 h / 200 °C,  [] Suited,  [] Well suited,  [] Ideally suited 

Vorteile:

  • Hitzebeständigkeit (bis zu 300 °C)
  • selbstklebende Eigenschaften
  • chemische Beständigkeit
  • Strahlungsbeständigkeit (vom Mikrowellen- bis zum UV-Bereich)
  • dauerhafte Elastizität (–45 °C bis über 200 °C)
  • neutral in Geruch und Geschmack

Anwendungen:

  • Dampfbügeleisen und Bügelstationen
  • Mikrowellen
  • Kaffeemaschinen
  • Wasserkocher
  • Reiskocher

Product Recommendations

Table is scrollable
Products
Technical data
Product properties
Hardness Shore A Tensile strength Elongation at break Tear strength Viscosity, dynamic Resistance Regulation Product Rheology Crosslinking Property Vulcanizate
ELASTOSIL® A07 TRANSLUCENT 20[7] 20[7] 1,5 N/mm²[8] 1,5 N/mm²[8] 300 %[11] 300 %[11] 4,0 N/mm[1] 4,0 N/mm[1] 8000 mPa·s[2] 8000 mPa·s[2] - Solvent-based Flowable - -
ELASTOSIL® A234 WHITE 35[7] 35[7] 2,5 N/mm²[8] 2,5 N/mm²[8] 200 %[11] 200 %[11] 3,5 N/mm[1] 3,5 N/mm[1] 25000 mPa·s[3] 25000 mPa·s[3] Heat resistant - - - -
ELASTOSIL® E41 TRANSPARENT 40[7] 40[7] 6,0 N/mm²[9] 6,0 N/mm²[9] 350 %[12] 350 %[12] 11,5 N/mm[1] 11,5 N/mm[1] 100000 mPa·s[4] 100000 mPa·s[4] - - Self-levelling - -
ELASTOSIL® E43 N BLACK 30[7] 30[7] 7,5 N/mm²[8] 7,5 N/mm²[8] 500 %[11] 500 %[11] - - - - - - Thixotropic - -
ELASTOSIL® E43 N TRANSPARENT 30[7] 30[7] 7,8 N/mm²[8] 7,8 N/mm²[8] 450 %[11] 450 %[11] - - - - - - Thixotropic - -
ELASTOSIL® E43 SCHWARZ 30[7] 30[7] 6,5 N/mm²[10] 6,5 N/mm²[10] 500 %[13] 500 %[13] 11,5 N/mm[1] 11,5 N/mm[1] 250000 mPa·s[3] 250000 mPa·s[3] - Solvent-free - - -
ELASTOSIL® E43 TRANSPARENT 30[7] 30[7] 6,50 N/mm²[9] 6,50 N/mm²[9] 500 %[12] 500 %[12] 11,5 N/mm[1] 11,5 N/mm[1] 250000 mPa·s[5] 250000 mPa·s[5] - Solvent-free - - -
ELASTOSIL® E47 TRANSPARENT 37[7] 37[7] 4,5 N/mm²[10] 4,5 N/mm²[10] 450 %[13] 450 %[13] 10 N/mm[1] 10 N/mm[1] 600000 mPa·s[5] 600000 mPa·s[5] - MIL-A 46106 grade Non-slump, Thixotropic - -
ELASTOSIL® E50 N TRANSPARENT 35[7] 35[7] 2,6 N/mm²[8] 2,6 N/mm²[8] 200 %[11] 200 %[11] - - - - - MIL-A 46106 grade - - -
ELASTOSIL® E50 TRANSPARENT 35[7] 35[7] 1,5 N/mm²[8] 1,5 N/mm²[8] 150 %[11] 150 %[11] 5,0 N/mm[1] 5,0 N/mm[1] 50000 mPa·s[6] 50000 mPa·s[6] - MIL-A 46106 grade Self-levelling - -
ELASTOSIL® RT 705 42[7] 42[7] 3,0 N/mm²[8] 3,0 N/mm²[8] 180 %[11] 180 %[11] 4,6 N/mm[1] 4,6 N/mm[1] - - Steam resistant, Heat resistant - Thixotropic One-component Self-adhesive
ELASTOSIL® RT 706 32[7] 32[7] 1,9 N/mm²[8] 1,9 N/mm²[8] 180 %[11] 180 %[11] 3,2 N/mm[1] 3,2 N/mm[1] - - Steam resistant, Heat resistant - - One-component Self-adhesive
ELASTOSIL® RT 707 W 45[7] 45[7] 3,5 N/mm²[8] 3,5 N/mm²[8] 200 %[11] 200 %[11] - - - - Steam resistant, Heat resistant - - One-component Self-adhesive
ELASTOSIL® RT 708 42[7] 42[7] 4,0 N/mm²[8] 4,0 N/mm²[8] 250 %[11] 250 %[11] 6,3 N/mm[1] 6,3 N/mm[1] - - Steam resistant, Heat resistant - Thixotropic One-component Self-adhesive
ELASTOSIL® RT 771 45[7] 45[7] 1 N/mm²[8] 1 N/mm²[8] 180 %[11] 180 %[11] - - - - Media resistant - Shear thinning, Thixotropic Condensation-curing, Two-component Self-adhesive, Electrically insulating
ELASTOSIL® RT 772 32[7] 32[7] 2,0 N/mm²[8] 2,0 N/mm²[8] 130 %[11] 130 %[11] 3,8 N/mm[1] 3,8 N/mm[1] - - Heat resistant, Steam resistant - - Condensation-curing, Two-component Self-adhesive, Electrically insulating
ELASTOSIL® RT 778 50[7] 50[7] 3,5 N/mm²[8] 3,5 N/mm²[8] 120 %[11] 120 %[11] 7,0[1] 7,0[1] - - Heat resistant - Shear thinning, Non-slump Condensation-curing, Two-component, Fast curing at room temperature Self-adhesive, Electrically insulating
Legend
[1] Tear strength | ASTM D 624 B,  [2] Viscosity, dynamic | 23 °C | DIN EN ISO 2555 | Brookfield: spindle 3, 5 rpm,  [3] Viscosity, dynamic D = 0,5 1/s | 25 °C | DIN EN ISO 3219,  [4] Viscosity, dynamic D = 1 1/s | 25 °C | DIN EN ISO 3219,  [5] Viscosity, dynamic D = 0.5 1/s | 25 °C | DIN EN ISO 3219,  [6] Viscosity, dynamic (2.5 rpm) | 23 °C | Brookfield,  [7] Hardness Shore A | DIN ISO 48-4,  [8] Tensile strength | ISO 37 type 1,  [9] Tensile strength | ISO 37 type 1 | Type 3 / 23°C / 2mm,  [10] Tensile strength | ISO 37 type 1 | Type 3 /23°C / 2mm,  [11] Elongation at break | ISO 37 type 1,  [12] Elongation at break | ISO 37 type 1 | Type 3 / 23°C / 2mm,  [13] Elongation at break | ISO 37 type 1 | Type 3 /23°C / 2mm,  [] Suited,  [] Well suited,  [] Ideally suited 

Product Recommendations

Table is scrollable
Products
Technical data
Product properties
Hardness Shore A Tensile strength Elongation at break Tear strength Viscosity, dynamic Compression Set Resistance Regulation Product Rheology Specific Features Crosslinking Property Vulcanizate
ELASTOSIL® A07 TRANSLUCENT 20[10] 20[10] 1,5 N/mm²[11] 1,5 N/mm²[11] 300 %[16] 300 %[16] 4,0 N/mm[1] 4,0 N/mm[1] 8000 mPa·s[3] 8000 mPa·s[3] - - - Solvent-based Flowable - - -
ELASTOSIL® A234 WHITE 35[10] 35[10] 2,5 N/mm²[11] 2,5 N/mm²[11] 200 %[16] 200 %[16] 3,5 N/mm[1] 3,5 N/mm[1] 25000 mPa·s[4] 25000 mPa·s[4] - - Heat resistant - - - - -
ELASTOSIL® A33 ELFENBEIN 28[10] 28[10] 2,5 N/mm²[11] 2,5 N/mm²[11] 300 %[16] 300 %[16] 7,8 N/mm[2] 7,8 N/mm[2] 1000000 mPa·s[5] 1000000 mPa·s[5] - - Oil resistant - Non-slump - - -
ELASTOSIL® A59 GREY 01 20[10] 20[10] 1,2 N/mm²[11] 1,2 N/mm²[11] 300 %[16] 300 %[16] 3,0 N/mm[1] 3,0 N/mm[1] 40000 mPa·s[6] 40000 mPa·s[6] - - Oil resistant, Heat resistant - Self-levelling - - -
ELASTOSIL® E10 ROT 25[10] 25[10] 2,5 N/mm²[12] 2,5 N/mm²[12] 300 %[17] 300 %[17] 8,0 N/mm[1] 8,0 N/mm[1] - - - - Heat resistant Solvent-free Flowable - - -
ELASTOSIL® E14 Red 32[10] 32[10] 2,5 N/mm²[11] 2,5 N/mm²[11] 400 %[16] 400 %[16] 7 N/mm[1] 7 N/mm[1] - - - - Heat resistant MIL-A 46106 grade Non-slump - - -
ELASTOSIL® E303 TRANSLUZENT 30[10] 30[10] 5 N/mm²[13] 5 N/mm²[13] 400 %[18] 400 %[18] - - - - - - - Solvent-based - - - -
ELASTOSIL® E4 15[10] 15[10] 2 N/mm²[14] 2 N/mm²[14] 750 %[19] 750 %[19] 7,3 N/mm[1] 7,3 N/mm[1] - - - - - - Non-slump - - -
ELASTOSIL® E41 TRANSPARENT 40[10] 40[10] 6,0 N/mm²[14] 6,0 N/mm²[14] 350 %[19] 350 %[19] 11,5 N/mm[1] 11,5 N/mm[1] 100000 mPa·s[7] 100000 mPa·s[7] - - - - Self-levelling - - -
ELASTOSIL® E43 N BLACK 30[10] 30[10] 7,5 N/mm²[11] 7,5 N/mm²[11] 500 %[16] 500 %[16] - - - - - - - - Thixotropic - - -
ELASTOSIL® E43 N TRANSPARENT 30[10] 30[10] 7,8 N/mm²[11] 7,8 N/mm²[11] 450 %[16] 450 %[16] - - - - - - - - Thixotropic - - -
ELASTOSIL® E43 SCHWARZ 30[10] 30[10] 6,5 N/mm²[15] 6,5 N/mm²[15] 500 %[20] 500 %[20] 11,5 N/mm[1] 11,5 N/mm[1] 250000 mPa·s[4] 250000 mPa·s[4] - - - Solvent-free - - - -
ELASTOSIL® E43 TRANSPARENT 30[10] 30[10] 6,50 N/mm²[14] 6,50 N/mm²[14] 500 %[19] 500 %[19] 11,5 N/mm[1] 11,5 N/mm[1] 250000 mPa·s[8] 250000 mPa·s[8] - - - Solvent-free - - - -
ELASTOSIL® E47 TRANSPARENT 37[10] 37[10] 4,5 N/mm²[15] 4,5 N/mm²[15] 450 %[20] 450 %[20] 10 N/mm[1] 10 N/mm[1] 600000 mPa·s[8] 600000 mPa·s[8] - - - MIL-A 46106 grade Non-slump, Thixotropic - - -
ELASTOSIL® E50 N TRANSPARENT 35[10] 35[10] 2,6 N/mm²[11] 2,6 N/mm²[11] 200 %[16] 200 %[16] - - - - - - - MIL-A 46106 grade - - - -
ELASTOSIL® E50 TRANSPARENT 35[10] 35[10] 1,5 N/mm²[11] 1,5 N/mm²[11] 150 %[16] 150 %[16] 5,0 N/mm[1] 5,0 N/mm[1] 50000 mPa·s[9] 50000 mPa·s[9] - - - MIL-A 46106 grade Self-levelling - - -
ELASTOSIL® E60 N GRAU 32[10] 32[10] 3,0 N/mm²[11] 3,0 N/mm²[11] 250 %[16] 250 %[16] - - - - - - - - - - - -
ELASTOSIL® E60 N ROT 32[10] 32[10] 3,2 N/mm²[11] 3,2 N/mm²[11] 250 %[16] 250 %[16] - - - - - - - - - - - -
ELASTOSIL® E60 N SCHWARZ 30[10] 30[10] 2,1 N/mm²[11] 2,1 N/mm²[11] 200 %[16] 200 %[16] - - - - - - - - - - - -
ELASTOSIL® LR 3003/30 R A/B 30[10] 30[10] 7,5 N/mm²[11] 7,5 N/mm²[11] 600 %[16] 600 %[16] 20 N/mm[1] 20 N/mm[1] - - 10 %[21] 10 %[21] - - - Food-contact, Reduced volatile content - -
ELASTOSIL® N 2010 25[10] 25[10] 1 N/mm²[12] 1 N/mm²[12] 200 %[18] 200 %[18] - - - - - - - - Shear thinning, Self-levelling - - -
ELASTOSIL® N 2034 35[10] 35[10] 2 N/mm²[12] 2 N/mm²[12] 200 %[18] 200 %[18] - - - - - - - Flame retardant - - - -
ELASTOSIL® N 2076 36[10] 36[10] 1,6 N/mm²[11] 1,6 N/mm²[11] 150 %[16] 150 %[16] - - - - - - - Flame retardant Flowable - - -
ELASTOSIL® N 2189 45[10] 45[10] 1,5 N/mm²[12] 1,5 N/mm²[12] 200 %[18] 200 %[18] 5,0 N/mm[1] 5,0 N/mm[1] - - - - Oil resistant, Heat resistant Flame retardant Non-slump - - -
ELASTOSIL® N 2199 30[10] 30[10] 2,5 N/mm²[12] 2,5 N/mm²[12] 400 %[18] 400 %[18] 6,5 N/mm[1] 6,5 N/mm[1] - - - - - - Non-slump - - -
ELASTOSIL® N9111 BLACK 30[10] 30[10] 2,0 N/mm²[12] 2,0 N/mm²[12] 450 %[17] 450 %[17] 8,5 N/mm[2] 8,5 N/mm[2] - - - - - Flame retardant Non-slump, Thixotropic - - -
ELASTOSIL® N9111 GREY 30[10] 30[10] 2,2 N/mm²[12] 2,2 N/mm²[12] 500 %[17] 500 %[17] 10 N/mm[2] 10 N/mm[2] - - - - - - Non-slump, Thixotropic - - -
ELASTOSIL® N9111 WHITE 30[10] 30[10] 2,20 N/mm²[12] 2,20 N/mm²[12] 500 %[17] 500 %[17] 10 N/mm[2] 10 N/mm[2] - - - - - Flame retardant Non-slump, Thixotropic - - -
ELASTOSIL® N9189 45[10] 45[10] 2,8 N/mm²[11] 2,8 N/mm²[11] 330 %[16] 330 %[16] - - - - - - Heat resistant - Shear thinning, Non-slump - - -
ELASTOSIL® RT 702 40[10] 40[10] 6,1 N/mm²[11] 6,1 N/mm²[11] 500 %[16] 500 %[16] 10,1[1] 10,1[1] - - - - Heat resistant - Thixotropic - One-component Self-adhesive
ELASTOSIL® RT 705 42[10] 42[10] 3,0 N/mm²[11] 3,0 N/mm²[11] 180 %[16] 180 %[16] 4,6 N/mm[1] 4,6 N/mm[1] - - - - Steam resistant, Heat resistant - Thixotropic - One-component Self-adhesive
ELASTOSIL® RT 706 32[10] 32[10] 1,9 N/mm²[11] 1,9 N/mm²[11] 180 %[16] 180 %[16] 3,2 N/mm[1] 3,2 N/mm[1] - - - - Steam resistant, Heat resistant - - - One-component Self-adhesive
ELASTOSIL® RT 707 W 45[10] 45[10] 3,5 N/mm²[11] 3,5 N/mm²[11] 200 %[16] 200 %[16] - - - - - - Steam resistant, Heat resistant - - - One-component Self-adhesive
ELASTOSIL® RT 708 42[10] 42[10] 4,0 N/mm²[11] 4,0 N/mm²[11] 250 %[16] 250 %[16] 6,3 N/mm[1] 6,3 N/mm[1] - - - - Steam resistant, Heat resistant - Thixotropic - One-component Self-adhesive
ELASTOSIL® RT 771 45[10] 45[10] 1 N/mm²[11] 1 N/mm²[11] 180 %[16] 180 %[16] - - - - - - Media resistant - Shear thinning, Thixotropic - Condensation-curing, Two-component Self-adhesive, Electrically insulating
ELASTOSIL® RT 772 32[10] 32[10] 2,0 N/mm²[11] 2,0 N/mm²[11] 130 %[16] 130 %[16] 3,8 N/mm[1] 3,8 N/mm[1] - - - - Heat resistant, Steam resistant - - - Condensation-curing, Two-component Self-adhesive, Electrically insulating
ELASTOSIL® RT 773 35[10] 35[10] 1,2 N/mm²[11] 1,2 N/mm²[11] 75 %[16] 75 %[16] 4,7 N/mm[1] 4,7 N/mm[1] - - - - Media resistant - Shear thinning, Thixotropic, Non-slump - Condensation-curing, Two-component Self-adhesive, Compressible, Low density, Electrically insulating
ELASTOSIL® RT 778 50[10] 50[10] 3,5 N/mm²[11] 3,5 N/mm²[11] 120 %[16] 120 %[16] 7,0[1] 7,0[1] - - - - Heat resistant - Shear thinning, Non-slump - Condensation-curing, Two-component, Fast curing at room temperature Self-adhesive, Electrically insulating
Legend
[1] Tear strength | ASTM D 624 B,  [2] Tear strength | ASTM D 624 B | 23°C / 2mm,  [3] Viscosity, dynamic | 23 °C | DIN EN ISO 2555 | Brookfield: spindle 3, 5 rpm,  [4] Viscosity, dynamic D = 0,5 1/s | 25 °C | DIN EN ISO 3219,  [5] Viscosity, dynamic | 25 °C | 0.5 1/s | DIN EN ISO 3219,  [6] Viscosity, dynamic | 25 °C | DIN EN ISO 3219,  [7] Viscosity, dynamic D = 1 1/s | 25 °C | DIN EN ISO 3219,  [8] Viscosity, dynamic D = 0.5 1/s | 25 °C | DIN EN ISO 3219,  [9] Viscosity, dynamic (2.5 rpm) | 23 °C | Brookfield,  [10] Hardness Shore A | DIN ISO 48-4,  [11] Tensile strength | ISO 37 type 1,  [12] Tensile strength | ISO 37 | Type 3 / 23°C / 2mm,  [13] Tensile strength | ISO 37 | Type 3 / 23 °C / d = 2 mm,  [14] Tensile strength | ISO 37 type 1 | Type 3 / 23°C / 2mm,  [15] Tensile strength | ISO 37 type 1 | Type 3 /23°C / 2mm,  [16] Elongation at break | ISO 37 type 1,  [17] Elongation at break | ISO 37 | Type 3 / 23°C / 2mm,  [18] Elongation at break | ISO 37,  [19] Elongation at break | ISO 37 type 1 | Type 3 / 23°C / 2mm,  [20] Elongation at break | ISO 37 type 1 | Type 3 /23°C / 2mm,  [21] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A | post-cured 6 h / 200 °C,  [] Suited,  [] Well suited,  [] Ideally suited