我们的系统检测到您来自 美国，但当前设定的国家/地区为巴西。 您仍然要更改您的国家/地区吗？

工业印刷

Paper, Pulp & Printing - Industrial Printing

瓦克的高品质ELASTOSIL® RT硅橡胶系列可用于所有类型的移印工艺。敏感材料印刷用抗静电产品和其它ELASTOSIL®体系进一步丰富了我们的高性能产品组合。所有产品都具有极高的反应性，可缩短生产过程中的工艺时间，即使是液体有机硅含量极高的橡胶产品也不例外。

优点：

  • 优异的流动性能
  • 良好的自脱泡性能
  • 低粘度
  • 提供各种邵氏A硬度
  • 脱模时间短
  • 力学性能出色，可长期保持稳定
  • 高抗撕裂性

应用领域：

  • 键盘
  • 汽车行业
  • 玩具
  • 运动设备

Product Recommendations

Table is scrollable
Products
Technical data
Product properties
Viscosity, dynamic Tear strength Hardness Shore A Tensile strength Elongation at break Surface property Regulation Product Rheology Crosslinking Property
ELASTOSIL® M 4400 30000 mPa·s[1] 30000 mPa·s[1] > 3 N/mm[4] > 3 N/mm[4] 23[5] 23[5] 2 N/mm²[7] 2 N/mm²[7] 250 %[9] 250 %[9] - - Flowable Condensation-curing, Two-component
ELASTOSIL® RT 402 - - > 3 N/mm[4] > 3 N/mm[4] 11[5] 11[5] 2 N/mm²[7] 2 N/mm²[7] 350 %[9] 350 %[9] Antistatic - Flowable Condensation-curing, Two-component
ELASTOSIL® RT 620 A/B 7000 mPa·s[2] 7000 mPa·s[2] ≥ 12 N/mm[4] ≥ 12 N/mm[4] 17[6] 17[6] 5 N/mm²[8] 5 N/mm²[8] 900 %[10] 900 %[10] - Food-contact Flowable No chemical shrinkage, Two-component, Addition Curing
ELASTOSIL® RT 623 A/B 15000 mPa·s[3] 15000 mPa·s[3] > 30 N/mm[4] > 30 N/mm[4] 31[6] 31[6] 7.5 N/mm²[8] 7.5 N/mm²[8] 700 %[10] 700 %[10] - - Flowable No chemical shrinkage, Two-component, Addition Curing, Fast curing at room temperature
ELASTOSIL® RT 623 A/B KR 15000 mPa·s[3] 15000 mPa·s[3] > 30 N/mm[4] > 30 N/mm[4] 31[6] 31[6] 7.5 N/mm²[8] 7.5 N/mm²[8] 700 %[10] 700 %[10] - - Flowable No chemical shrinkage, Two-component, Addition Curing, Fast curing at room temperature
ELASTOSIL® RT 629 A/B 14000 mPa·s[3] 14000 mPa·s[3] 25 N/mm[4] 25 N/mm[4] 31[6] 31[6] 6 N/mm²[8] 6 N/mm²[8] 500 %[10] 500 %[10] Antistatic - Flowable No chemical shrinkage, Two-component, Addition Curing, Fast curing at room temperature
Legend
[1] Viscosity, dynamic after stirring | 23 °C | DIN EN ISO 3219,  [2] Viscosity, dynamic | 23 °C | ISO 3219,  [3] Viscosity, dynamic after stirring | 23 °C | ISO 3219,  [4] Tear strength | ASTM D 624 B,  [5] Hardness Shore A | ISO 868,  [6] Hardness Shore A | DIN ISO 48-4,  [7] Tensile strength | ISO 37,  [8] Tensile strength | ISO 37 type 1,  [9] Elongation at break | ISO 37,  [10] Elongation at break | ISO 37 type 1,  [] Suited,  [] Well suited,  [] Ideally suited