此内容适用于巴基斯坦。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？

ELASTOSIL® RT 623 A/B

$ELASTOSIL<sup>®</sup> RT 623 A/B

Pourable, addition-curing, two-component silicone rubber for pad printing that vulcanizes at room temperature.

 

Main application: Making printing pads.


Properties

  • very good flow
  • high reactivity for fast demolding even if large amounts of silicone fluid are added
  • fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
  • medium Shore A hardness (approx. 31)
  • high tear strength
  • long-term stability of the vulcanizate’s mechanical properties, particularly its hardness

Specific features of ELASTOSIL® RT 623 A/B

  • Addition Curing
  • Excellent mechanical properties
  • Fast curing at room temperature
  • Flowable
  • No chemical shrinkage
  • Two-component

Base rubber for making printing pads.

ELASTOSIL® RT 623 A/B has been specially designed as a base material for making printing pads.

The vulcanizate’s high mechanical strength and long term stability of hardness make ELASTOSIL® RT 623 A/B an ideal base material for producing printing pads with excellent mechanical properties and long service life.

 

Important note:

The platinum catalyst is in component B.

 

Important:

A and B components may only be used together if they have the same batch number.

 

To ensure both optimum flow and homogeneity of the material, the components must be stirred thoroughly before they are removed or processed in their containers, in order to uniformly disperse any fillers that might have settled during storage.

 

Dilution charts:

The following table shows the hardness of ELASTOSIL® RT 623 A/B as a function of the added amount of Wacker Silicone Fluid AK 35 for Durometer Types Shore A and Shore 00.

 Please check also our brochures and info sheets.

Storage

The 'Best use before end' date of each batch is shown on the product label.

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemicals Middle East
Dubai Silicon Oasis s/n
0001 Dubai
United Arab Emirates
+971  4  709-9999 (Phone)
+971 4 709-9911  (Fax)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

您是否需要产品样本？

您可以在此处索取产品样本。

索取样本

More products

Products Technical data
dynamische Viskosität 动态粘度 Tear strength Weiterreißwiderstand Hardness Shore A Tensile strength Elongation at break
ELASTOSIL® M 4400 - - 30000 mPa·s[1] 30000 mPa·s[1] - - > 3 N/mm[4] > 3 N/mm[4] 23[6] 23[6] 2 N/mm²[8] 2 N/mm²[8] 250 %[10] 250 %[10]
ELASTOSIL® RT 402 - - - - - - > 3 N/mm[4] > 3 N/mm[4] 11[6] 11[6] 2 N/mm²[8] 2 N/mm²[8] 350 %[10] 350 %[10]
ELASTOSIL® RT 620 A/B - - 7000 mPa·s[2] 7000 mPa·s[2] ≥ 12 N/mm[5] ≥ 12 N/mm[5] - - 17[7] 17[7] 5 N/mm²[9] 5 N/mm²[9] 900 %[11] 900 %[11]
ELASTOSIL® RT 623 A/B 15000 mPa·s[3] 15000 mPa·s[3] - - > 30 N/mm[5] > 30 N/mm[5] - - 31[7] 31[7] 7.5 N/mm²[9] 7.5 N/mm²[9] 700 %[11] 700 %[11]
ELASTOSIL® RT 623 A/B KR 15000 mPa·s[3] 15000 mPa·s[3] - - > 30 N/mm[5] > 30 N/mm[5] - - 31[7] 31[7] 7.5 N/mm²[9] 7.5 N/mm²[9] 700 %[11] 700 %[11]
ELASTOSIL® RT 629 A/B 14000 mPa·s[3] 14000 mPa·s[3] - - 25 N/mm[5] 25 N/mm[5] - - 31[7] 31[7] 6 N/mm²[9] 6 N/mm²[9] 500 %[11] 500 %[11]
Legend
[1] 动态粘度 after stirring | 23 °C | DIN EN ISO 3219,  [2] 动态粘度 | 23 °C | ISO 3219,  [3] dynamische Viskosität nach Umrühren | 23 °C | ISO 3219,  [4] Weiterreißwiderstand | ASTM D 624 B,  [5] Tear strength | ASTM D 624 B,  [6] Hardness Shore A | ISO 868,  [7] Hardness Shore A | DIN ISO 48-4,  [8] Tensile strength | ISO 37,  [9] Tensile strength | ISO 37 type 1,  [10] Elongation at break | ISO 37,  [11] Elongation at break | ISO 37 type 1 

Order

My media


Go to order form

Sales Contact

Wacker Quimica do Brasil Ltda.
Rua Municipal, 325
06612-060 Jandira
+55  11  4789-8300 （电话）

My favorites

My products