我们的系统检测到您来自 美国，但当前设定的国家/地区为巴基斯坦。 您仍然要更改您的国家/地区吗？

通风、暖气及空调技术

通风、暖气及空调技术领域对所用产品有相当广泛的要求。瓦克ELASTOSIL®和WACKER SilGel®品牌的产品性能出色，适用于众多不同应用。它们没有生态及生理危害，如有需要，亦可用于可能与食品发生接触的领域。

Heating & Cooling

性能：

  • 热稳定
  • 自粘
  • 耐化学品
  • 耐辐射（微波至紫外线范围）
  • 弹性持久（–45°C至200°C以上）

典型应用：

  • 空调设备
  • 洁净室过滤器
  • 热交换器
  • 供热设备

Product Recommendations

Table is scrollable
Products
Technical data
Product properties
Appearance Hardness Shore A Tensile strength Elongation at break Tear-growth resistance Viscosity, dynamic 动态粘度 Resistance Product Type Regulation Product Rheology Specific Features Crosslinking Property Vulcanizate
ELASTOSIL® A234 WHITE - - 35[11] 35[11] 2.5 N/mm²[12] 2.5 N/mm²[12] 200 %[17] 200 %[17] 3.5 N/mm[1] 3.5 N/mm[1] - - 25000 mPa·s[3] 25000 mPa·s[3] Heat resistant - - - - - -
ELASTOSIL® A33 IVORY - - 28[11] 28[11] 2.5 N/mm²[12] 2.5 N/mm²[12] 300 %[17] 300 %[17] 7.8 N/mm[2] 7.8 N/mm[2] - - 1000000 mPa·s[4] 1000000 mPa·s[4] Oil resistant - - Non-slump - - -
ELASTOSIL® A59 GRAY - - 20[11] 20[11] 1.2 N/mm²[12] 1.2 N/mm²[12] 300 %[17] 300 %[17] 3.0 N/mm[1] 3.0 N/mm[1] - - 40000 mPa·s[5] 40000 mPa·s[5] Oil resistant, Heat resistant - - Self-levelling - - -
ELASTOSIL® E10 ROT - - 25[11] 25[11] 2.5 N/mm²[13] 2.5 N/mm²[13] 300 %[18] 300 %[18] 8.0 N/mm[1] 8.0 N/mm[1] - - - - Heat resistant - Solvent-free Flowable - - -
ELASTOSIL® E14 Red - - 32[11] 32[11] 2.5 N/mm²[12] 2.5 N/mm²[12] 400 %[17] 400 %[17] 7 N/mm[1] 7 N/mm[1] - - - - Heat resistant - MIL-A 46106 grade Non-slump - - -
ELASTOSIL® E303 TRANSLUZENT - - 30[11] 30[11] 5 N/mm²[14] 5 N/mm²[14] 400 %[19] 400 %[19] - - - - - - - - Solvent-based - - - -
ELASTOSIL® E4 - - 15[11] 15[11] 2 N/mm²[15] 2 N/mm²[15] 750 %[20] 750 %[20] 7.3 N/mm[1] 7.3 N/mm[1] - - - - - - - Non-slump - - -
ELASTOSIL® E41 TRANSPARENT - - 40[11] 40[11] 6.0 N/mm²[15] 6.0 N/mm²[15] 350 %[20] 350 %[20] 11.5 N/mm[1] 11.5 N/mm[1] - - 100000 mPa·s[6] 100000 mPa·s[6] - - - Self-levelling - - -
ELASTOSIL® E43 BLACK - - 30[11] 30[11] 6.5 N/mm²[16] 6.5 N/mm²[16] 500 %[21] 500 %[21] 11.5 N/mm[1] 11.5 N/mm[1] - - 250000 mPa·s[3] 250000 mPa·s[3] - - Solvent-free - - - -
ELASTOSIL® E43 N BLACK - - 30[11] 30[11] 7.5 N/mm²[12] 7.5 N/mm²[12] 500 %[17] 500 %[17] - - - - - - - - - Thixotropic - - -
ELASTOSIL® E43 N TRANSPARENT - - 30[11] 30[11] 7.8 N/mm²[12] 7.8 N/mm²[12] 450 %[17] 450 %[17] - - - - - - - - - Thixotropic - - -
ELASTOSIL® E43 TRANSPARENT - - 30[11] 30[11] 6.50 N/mm²[15] 6.50 N/mm²[15] 500 %[20] 500 %[20] 11.5 N/mm[1] 11.5 N/mm[1] - - 250000 mPa·s[7] 250000 mPa·s[7] - - Solvent-free - - - -
ELASTOSIL® E47 TRANSPARENT - - 37[11] 37[11] 4.5 N/mm²[16] 4.5 N/mm²[16] 450 %[21] 450 %[21] 10 N/mm[1] 10 N/mm[1] 600000 mPa·s[8] 600000 mPa·s[8] - - - - MIL-A 46106 grade Non-slump, Thixotropic - - -
ELASTOSIL® E50 N TRANSPARENT - - 35[11] 35[11] 2.6 N/mm²[12] 2.6 N/mm²[12] 200 %[17] 200 %[17] - - - - - - - - MIL-A 46106 grade - - - -
ELASTOSIL® E60 N BLACK - - 30[11] 30[11] 2.1 N/mm²[12] 2.1 N/mm²[12] 200 %[17] 200 %[17] - - - - - - - - - - - - -
ELASTOSIL® E60 N GREY - - 32[11] 32[11] 3.0 N/mm²[12] 3.0 N/mm²[12] 250 %[17] 250 %[17] - - - - - - - - - - - - -
ELASTOSIL® E60 N RED - - 32[11] 32[11] 3.2 N/mm²[12] 3.2 N/mm²[12] 250 %[17] 250 %[17] - - - - - - - - - - - - -
ELASTOSIL® N 2010 - - 25[11] 25[11] 1 N/mm²[13] 1 N/mm²[13] 200 %[19] 200 %[19] - - 10.000 mPa·s[9] 10.000 mPa·s[9] - - - - - Shear thinning, Self-levelling - - -
ELASTOSIL® N 2034 - - 35[11] 35[11] 2 N/mm²[13] 2 N/mm²[13] 200 %[19] 200 %[19] - - 30000 mPa·s[8] 30000 mPa·s[8] - - - - Flame retardant - - - -
ELASTOSIL® N 2076 - - 36[11] 36[11] 1.6 N/mm²[12] 1.6 N/mm²[12] 150 %[17] 150 %[17] - - - - - - - - Flame retardant Flowable - - -
ELASTOSIL® N 2189 - - 45[11] 45[11] 1.5 N/mm²[13] 1.5 N/mm²[13] 200 %[19] 200 %[19] 5.0 N/mm[1] 5.0 N/mm[1] 250000 mPa·s[8] 250000 mPa·s[8] - - Oil resistant, Heat resistant - Flame retardant Non-slump - - -
ELASTOSIL® N 2199 - - 30[11] 30[11] 2.5 N/mm²[13] 2.5 N/mm²[13] 400 %[19] 400 %[19] 6.5 N/mm[1] 6.5 N/mm[1] 950000 mPa·s[10] 950000 mPa·s[10] - - - - - Non-slump - - -
ELASTOSIL® N9111 BLACK - - 30[11] 30[11] 2.0 N/mm²[13] 2.0 N/mm²[13] 450 %[18] 450 %[18] 8.5 N/mm[2] 8.5 N/mm[2] 1000000 mPa·s[8] 1000000 mPa·s[8] - - - - Flame retardant Non-slump, Thixotropic - - -
ELASTOSIL® N9111 GREY - - 30[11] 30[11] 2.2 N/mm²[13] 2.2 N/mm²[13] 500 %[18] 500 %[18] 10 N/mm[2] 10 N/mm[2] 1000000 mPa·s[8] 1000000 mPa·s[8] - - - - - Non-slump, Thixotropic - - -
ELASTOSIL® N9111 WHITE - - 30[11] 30[11] 2.20 N/mm²[13] 2.20 N/mm²[13] 500 %[18] 500 %[18] 10 N/mm[2] 10 N/mm[2] 900000 mPa·s[10] 900000 mPa·s[10] - - - - Flame retardant Non-slump, Thixotropic - - -
ELASTOSIL® N9189 - - 40[11] 40[11] 2.8 N/mm²[12] 2.8 N/mm²[12] 300 %[17] 300 %[17] - - - - - - Heat resistant - - Shear thinning, Non-slump - - -
ELASTOSIL® RT 702 - - 40[11] 40[11] 6.1 N/mm²[12] 6.1 N/mm²[12] 500 %[17] 500 %[17] 10.1[1] 10.1[1] - - - - Heat resistant - - Thixotropic - One-component Self-adhesive
WACKER® AKC Silicone Fluids clear to slightly turbid clear to slightly turbid - - - - - - - - - - - - - Silicone Fluid, Fluid - - Heat resistant - -
Legend
[1] Tear-growth resistance | ASTM D 624 B,  [2] Tear-growth resistance | ASTM D 624 B | 23°C / 2mm,  [3] 动态粘度 D = 0,5 1/s | 25 °C | DIN EN ISO 3219,  [4] 动态粘度 | 25 °C | 0.5 1/s | DIN EN ISO 3219,  [5] 动态粘度 | 25 °C | DIN EN ISO 3219,  [6] 动态粘度 D = 1 1/s | 25 °C | DIN EN ISO 3219,  [7] 动态粘度 D = 0.5 1/s | 25 °C | DIN EN ISO 3219,  [8] Viscosity, dynamic D = 0.5 1/s | 25 °C | DIN EN ISO 3219,  [9] Viscosity, dynamic | 25 1/s | ISO 3219,  [10] Viscosity, dynamic D = 0,5 1/s | 25 °C | DIN EN ISO 3219,  [11] Hardness Shore A | DIN ISO 48-4,  [12] Tensile strength | ISO 37 type 1,  [13] Tensile strength | ISO 37 | Type 3 / 23°C / 2mm,  [14] Tensile strength | ISO 37 | Type 3 / 23 °C / d = 2 mm,  [15] Tensile strength | ISO 37 type 1 | Type 3 / 23°C / 2mm,  [16] Tensile strength | ISO 37 type 1 | Type 3 /23°C / 2mm,  [17] Elongation at break | ISO 37 type 1,  [18] Elongation at break | ISO 37 | Type 3 / 23°C / 2mm,  [19] Elongation at break | ISO 37,  [20] Elongation at break | ISO 37 type 1 | Type 3 / 23°C / 2mm,  [21] Elongation at break | ISO 37 type 1 | Type 3 /23°C / 2mm,  [] Suited,  [] Well suited,  [] Ideally suited