ELASTOSIL® P 7671 A/B
Addition-curing RTV-2 silicone rubber curing to a silicone elastomer of very low hardness.
Eigenschaften
- low viscosity, pourable
- mixing ratio 1 : 1
- short pot-life
- rapid cure at room temperature which can be accelerated considerably by the application of heat
- low hardness Shore 00 (~ 18)
Spezifische Merkmale von ELASTOSIL® P 7671 A/B
- Additionsvernetzend
- Fließfähig
- Hautverträglich
- Schnelle Aushärtung bei Raumtemperatur
- zweikomponentig
Datenblätter
ELASTOSIL® P 7671 A/B can be used for flexible molding applications in prosthetics.
The components A and B of ELASTOSIL® P 7671 A/B are mixed homogeneously in a ratio of 1 : 1 and vulcanize rapidly at temperatures over 100°C. In a given application the required curing conditions (temperature and time) will also depend on the size and thickness of the part.
Detailed instructions for preparation and use are given in the brochure “Room Temperature Vulcanizing (RTV) Silicones - Material and Processing Guidelines”
Important note:
The platinum catalyst is in component A.
Caution!
Only A and B components with the same batch number may be processed together!
Lagerung
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Vertrieb & Support
Wie können wir Ihnen helfen?
- Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.