VINNAPAS® 5711 L (Scale-up Product)
VINNAPAS® 5711 L (Scale-up Product) is a dispersible polymer powder for dry mix mortars, specifically suited for self-leveling flooring compounds and screeds. It is based on a hard copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® L which means that it improves the leveling and surface properties as well the stabilization of the fresh mortar. Cured mortars with VINNAPAS® 5711 L (Scale-up Product)have improved adhesion, flexural strength, deformability and abrasion resistance.
VINNAPAS® 5711 L (Scale-up Product) offers you the best-in-class solution for the above mentioned applications, while additionally providing a reduced product carbon footprint. VINNAPAS® 5711 L (Scale-up Product) is in the process of introduction into industrial use (Scale-up Product). Therefore the product data given are subject to change. Always consult WACKER POLYMERS about the product’s availability before using it for industrial purposes.
特性
- VINNAPAS® 5711 L (Scale-up Product) is a copolymer powder of vinyl acetate and ethylene and is dispersible in water.
- As a polymeric binder VINNAPAS® 5711 L (Scale-up Product) will provide very good workability to the fresh mortar.
- Cured mortars with VINNAPAS® 5711 L (Scale-up Product) have improved adhesion, flexural strength, deformability and abrasion resistance.
- VINNAPAS® 5711 L (Scale-up Product) is a dispersible hard polymer powder and greatly enhances leveling. It contains a fine mineral filler as an antiblocking agent and is produced without the use of organic solvents, plasticizers and film-forming agents.
- VINNAPAS® 5711 L (Scale-up Product) is especially advantageous in combination with synthetic superplasticizers or casein for the production of self-leveling flooring compounds and screeds.
- Special features of VINNAPAS® 5711 L (Scale-up Product) are its very good defoaming properties even without additional defoamer in the mortar formulation. This results in exceptionally smooth, uniform surfaces without air bubbles while also offering high abrasion resistance, flexural and compressive strength.
- Furthermore it allows self-leveling flooring compounds to be formulated with a low content of volatile organic compounds (VOC).
- The product thus can be used to produce self-leveling flooring compounds conforming to strict eco-labeling requirements.
- Additionally VINNAPAS® 5711 L (Scale-up Product) greatly enhances leveling at low viscosity.
VINNAPAS® 5711 L (Scale-up Product)的特殊性能
- 消泡
For typical application fields of VINNAPAS® 5711 L (Scale-up Product), refer to the section "application". Please discuss additional applications with your WACKER customer representative.
Processing
For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 5711 L (Scale-up Product) with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.
If the product is used in applications other than those mentioned, the choice, processing and use of it is the sole responsibility of the purchaser. All legal and other regulations must be complied with.
Slight color variations of the polymer granulate may occure without impairing the product's functionality.
包装
Big Bags or bulk on request.