Dieser Inhalt ist für Uganda bestimmt. Unser System hat erkannt, dass Sie aus USA kommen. Wollen Sie USA als neues Land setzen?

POWERSIL® INSULATOR FINISH

POWERSIL® INSULATOR FINISH is a self levelling, one-component silicone rubber, which cures at room temperature under the influence of moisture in the air. The elastomer has good mechanical and very good electrical properties.



Eigenschaften

  • acetic acid-curing system
  • very good resistance to weathering and air pollution

Spezifische Merkmale von POWERSIL® INSULATOR FINISH

  • kriechstromfest
  • Selbstnivellierend

POWERSIL® INSULATOR FINISH shows good primerless adhesion to cured silicone rubber and many substrates. We recommend to run preliminary tests to optimize conditions for the paricular application.

Lagerung

The 'Best use before end' date of each batch is shown on the product label.

 

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Vertrieb & Support

Wacker Chemicals Middle East
Dubai Silicon Oasis s/n
0001 Dubai
Vereinigte Arabische Emirate
+971  4  709-9999 (Phone)
+971 4 709-9911  (Fax)
Kontakt

Wie können wir Ihnen helfen?

  • Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Frage stellen

Mehr Produkte

Produkte Technische Daten
dynamische Viskosität Weiterreißwiderstand Härte Shore A Reißfestigkeit Reißdehnung
POWERSIL® INSULATOR FINISH 200000 mPa·s[2] 200000 mPa·s[2] 5,0 N/mm[1] 5,0 N/mm[1] - - 1,4 N/mm²[4] 1,4 N/mm²[4] 500 %[5] 500 %[5]
POWERSIL® N 553 DUNKELGRAU 4000 mPa·s[3] 4000 mPa·s[3] 9,0 N/mm[1] 9,0 N/mm[1] 60[6] 60[6] 3,0 N/mm²[4] 3,0 N/mm²[4] 100 %[5] 100 %[5]
SLM 26758 4000 mPa·s[3] 4000 mPa·s[3] 9,0 N/mm[1] 9,0 N/mm[1] 60[6] 60[6] 3,0 N/mm²[4] 3,0 N/mm²[4] 100 %[5] 100 %[5]
Legend
[1] Weiterreißwiderstand | ASTM D 624 B,  [2] dynamische Viskosität | DIN EN ISO 3219,  [3] dynamische Viskosität | 25 °C | DIN EN ISO 3219,  [4] Reißfestigkeit | ISO 37 Type 1,  [5] Reißdehnung | ISO 37 Type 1,  [6] Härte Shore A | DIN ISO 48-4 

Bestellen

Meine Medien


Vertriebskontakt

Wacker Chemie AG
Gisela-Stein-Strasse 1
81671 Munich
+49  89  6279-0 (Phone)

Meine Favoriten

Meine Produkte