ELASTOSIL® A16 BLUE

ELASTOSIL® A16 BLUE is a solventless, one component, curable elastomer designed for electronic applications. Under normal conditions ELASTOSIL® A16 BLUE has a very long skin-over time. Once ELASTOSIL® A16 BLUE is in place on the substrate, the cure is induced by exposure to a combination of carbon dioxide and moisture.


Eigenschaften

  • Carbon dioxide cure acceleration
  • Can be silk screened
  • Excellent adhesion



After ELASTOSIL® A16 BLUE has been applied to the substrates, the cure may be accelerated and the adhesion enhanced by the application first of heat and then of moist CO2. Adhesion of a 5 mil coating to most substrates can be enhanced by treating for four (4) minutes at 120°F followed by four (4) minutes in a moist CO2 environment (40-50% humidity and 1-3% CO2). On particularly difficult substrates, longer oven cycles at temperatures up to 140°F may be required to develop adhesion.

Lagerung

The "Best use before end date" of each batch is shown on the Certificate of Analysis. Storage beyond the date specified on the Certificate of Analysis does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Vertrieb & Support

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
USA
+1  888  922-5374 (Phone)
Kontakt

Wie können wir Ihnen helfen?

  • Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Frage stellen

Sie möchten ein Produktmuster?

Hier können Sie ein Produktmuster anfordern.

Muster anfordern

Mehr Produkte

Produkte Technische Daten
dynamische Viskosität Härte Shore A Reißfestigkeit Reißdehnung
ELASTOSIL® A 4 21000 cP[1] 21000 cP[1] 50[3] 50[3] - - 100 % 100 %
ELASTOSIL® A 8 90 cP[1] 90 cP[1] - - - - - -
ELASTOSIL® A16 BLUE 30000 mPa·s[2] 30000 mPa·s[2] 65[3] 65[3] 2,76 mPa 2,76 mPa 50 %[4] 50 %[4]
Legend
[1] dynamische Viskosität | 25 °C | WSTM-2103,  [2] dynamische Viskosität cP | 25 °C | WSTM-2103,  [3] Härte Shore A | WSTM-1110,  [4] Reißdehnung | WSTM 1228 

Bestellen

Meine Medien


Zum Bestellformular

Vertriebskontakt

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
+1  888  922-5374 (Phone)

Meine Favoriten

Meine Produkte