POWERSIL® 354 MH

POWERSIL® 354 MH is a peroxide crosslinking HCR rubber with excellent electrical as well as excellent mechanical properties especially suitable for outdoor applications in T&D.


Eigenschaften

  • ready-to-use, one-component system
  • very good dielectrical properties
  • good arc resistance

Spezifische Merkmale von POWERSIL® 354 MH

  • kriechstromfest

POWERSIL® 354 MH is especially designed for T&D applications. Because of its excellent mechanical properties POWERSIL® 354 MH is prone for use in "cable accessories" applications.

POWERSIL® 354 MH can be easily processed like other standard HCR grades. A profitable processing is easygoing for POWERSIL® 354 MH is shipped ready-to-use.

Press-moulding and injection-moulding are suitable for POWERSIL® 354 MH for vulcanizing.

Processing temperature depends on e.g. the peroxide used and the design of the articles. After vulcanizing post curing of the parts is highly recommended at a temperature of about 150°C up to 200°C, depending on the thickness.

While post curing be careful to have sufficient ventilation in the ventilating ovens.

 

For detailed information about processing and primers please refer to our brochure "ELASTOSIL® R HTV Silicone Rubber -Processing".

Lagerung

Please store the cardboard boxes in a dry and cool place. Already opened boxes should be closed again to avoid any contamination.

 

The 'Best use before end' date of each batch is shown on the product label.

 

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Vertrieb & Support

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
USA
+1  888  922-5374 (Phone)
Kontakt

Wie können wir Ihnen helfen?

  • Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Frage stellen

Distributoren

WACKER verfügt weltweit über ein Netzwerk fachkundiger Vertriebspartner. Bitte wählen Sie noch eine Anwendung aus damit wir Ihnen Ihre Ansprechpartner nennen können.

H.M. Royal, Inc.
689 Pennington Avenue
1953906 Trenton
1  800  2579452 (Phone)
Kontakt Händler Webseite
Hisco - Houston
6650 Concord Park Drive
Houston 77040-4098
Texas
1  877  4472650 (Phone)
Kontakt Händler Webseite

More products

Products Technical data
Appearance Hardness Shore A Tensile strength Elongation at break Tear strength Compression Set
POWERSIL® 3500 MH red, light grey red, light grey 45[1] 45[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 850 %[3] 850 %[3] 30 N/mm[4] 30 N/mm[4] 20 %[5] 20 %[5]
POWERSIL® 352 MH oyster white, tomato red oyster white, tomato red 40[1] 40[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 800 %[3] 800 %[3] 30 N/mm[4] 30 N/mm[4] - -
POWERSIL® 3525 MH pearl orange, blue grey pearl orange, blue grey 23[1] 23[1] 9,5 N/mm²[2] 9,5 N/mm²[2] 1100 %[3] 1100 %[3] 30 N/mm[4] 30 N/mm[4] - -
POWERSIL® 354 MH light grey light grey 45[1] 45[1] 8,0 N/mm²[2] 8,0 N/mm²[2] 550 %[3] 550 %[3] 17 N/mm[4] 17 N/mm[4] - -
POWERSIL® 415 MH black black 41[1] 41[1] 3,0 N/mm²[2] 3,0 N/mm²[2] 470 %[3] 470 %[3] 25 N/mm[4] 25 N/mm[4] - -
POWERSIL® 440 MH black black 42[1] 42[1] 7,5 N/mm²[2] 7,5 N/mm²[2] 500 %[3] 500 %[3] 12 N/mm[4] 12 N/mm[4] - -
Legend
[1] Hardness Shore A | DIN ISO 48-4,  [2] Tensile strength | ISO 37 type 1,  [3] Elongation at break | ISO 37 type 1,  [4] Tear strength | ASTM D 624 B,  [5] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A | post-cured 4 h / 200 °C 

Bestellen

Meine Medien


Zum Bestellformular

Vertriebskontakt

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
+1  888  922-5374 (Phone)

Meine Favoriten

Meine Produkte