SILPURAN® 2112 A/B

Two-component, addition-curing silicone composition curing to a soft silicone adhesive


Eigenschaften

  • biocompatible, certificates of compatibility with USP Class VI and ISO 10993 available on request
  • no by-products from curing process
  • medium viscosity, easily pourable
  • mixing ratio 1 : 1
  • good adhesion, typical value 2.6 N/2.5 cm (90° peel test, on stainless steel)
  • high transparency

Spezifische Merkmale von SILPURAN® 2112 A/B

  • Additionsvernetzend
  • biokompatibel
  • Hautverträglich
  • zweikomponentig

 

 

 

 

 

 

 

 

 

 

Components A and B of SILPURAN® 2112 A/B are mixed homogeneously in a ratio A : B = 1 : 1 and vulcanise rapidly at temperatures over 100 °C.

 

SILPURAN® 2112 A/B has good adhesive properties that can be adjusted to suit the relevant requirements:
Increasing the proportion of component A results in a softer vulcanisate and increased tackiness. Increasing the proportion of component B results in a harder vulcanisate and reduced tackiness.

Important note:
The platinum catalyst is in component A.

Caution!
Only A and B components with the same batch number may be processed together!

Lagerung

The 'Best use before end' date of each batch is shown on the product label.

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Vertrieb & Support

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
USA
+1  888  922-5374 (Phone)
Kontakt

Wie können wir Ihnen helfen?

  • Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Frage stellen

Sie möchten ein Produktmuster?

Hier können Sie ein Produktmuster anfordern.

Muster anfordern

More products

Products Technical data
dynamische Viskosität Viscosity, dynamic Penetration
SILPURAN® 2100 A/B 34000 mPa·s[1] 34000 mPa·s[1] - - 205 1/10mm[3] 205 1/10mm[3]
SILPURAN® 2112 A/B 11600 mPa·s[1] 11600 mPa·s[1] - - 225 1/10mm[3] 225 1/10mm[3]
SILPURAN® 2114 A/B 12000 mPa·s[1] 12000 mPa·s[1] - - 200 1/10mm[3] 200 1/10mm[3]
SILPURAN® 2114 OT A/B 12000 mPa·s[1] 12000 mPa·s[1] - - 170 1/10mm[3] 170 1/10mm[3]
SILPURAN® 2117 A/B 33000 mPa·s[1] 33000 mPa·s[1] - - 205 1/10mm[3] 205 1/10mm[3]
SILPURAN® 2124 A/B - - 3200 mPa·s[2] 3200 mPa·s[2] 155 1/10mm[3] 155 1/10mm[3]
SILPURAN® 2130 A/B - - 1000 mPa·s[2] 1000 mPa·s[2] 220 1/10mm[3] 220 1/10mm[3]
Legend
[1] dynamische Viskosität | DIN EN ISO 3219,  [2] Viscosity, dynamic | DIN EN ISO 3219,  [3] Penetration | DIN ISO 2137 | hollow cone of 62.5 g, 60 s 

Bestellen

Meine Medien


Zum Bestellformular

Vertriebskontakt

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
+1  888  922-5374 (Phone)

Meine Favoriten

Meine Produkte