LIOSIL® TS 405 E

$LIOSIL<sup>®</sup> TS 405 E

LIOSIL® TS 405 E is a microemulsion of a functional silicone fluid that was developed specially as a softener for the tissue industry. LIOSIL® TS 405 E has a low solid content.


Eigenschaften

Owing to its special structure and orientation on cellulose fibers, LIOSIL® TS 405 E is characterized by an very good soft hand at good hydrophilicity.

- good soft hand combined with excellent hydrophilicity
- dilutable with water, but we recommend direct use
- low viscosity
- high substantivity on cellulose fibers
- microemulsion


The product amount should be tailored to the particular tissue being used. Typically the amount of product applied on the tissue is in the range from 1 and 5 g/m². For the application of LIOSIL® TS 405 E common technologies like roll coating, slot coating, spraying, or rotor damping systems are recommended. Aerosol formation has to be avoided. In case of aerosol formation special protective measures are required (see material safety data sheet).


The use of the emulsion is recommended for all conventional tissue types such as toilet paper, facial tissue, handkerchiefs or cosmetic wipes, which may benefit from a certain soft feel. The emulsion can be combined with other organic softeners or well being additives, too, provided an adequate compatibility test has been performed. If substantial foaming occurs during processing,  we recommend our SILFOAM® antifoam agents.

Lagerung

The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Vertrieb & Support

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
USA
+1  888  922-5374 (Phone)
Kontakt

Wie können wir Ihnen helfen?

  • Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Frage stellen

Sie möchten ein Produktmuster?

Hier können Sie ein Produktmuster anfordern.

Muster anfordern

更多产品

个产品 技术数据
pH pH-Wert 乳化剂类型 Content 成分 外观
Liosil TS 9200 E - - 5,5 - 6,5 5,5 - 6,5 - - 36,5 - 41 %[2] 36,5 - 41 %[2] - - - -
LIOSIL® TS 1010 E - - - - - - ca. 33 %[3] ca. 33 %[3] ca. 33 %[3] ca. 33 %[3] - -
LIOSIL® TS 405 E - - - - - - ca. 8 %[3] ca. 8 %[3] ca. 8 %[3] ca. 8 %[3] - -
LIOSIL® TS 5002 E - - - - - - ca. 16 %[3] ca. 16 %[3] ca. 16 %[3] ca. 16 %[3] - -
LIOSIL® TS 533 - - - - - - - - ca. 35 %[4] ca. 35 %[4] - -
LIOSIL® TS 913 E - - - - - - ca. 22 %[3] ca. 22 %[3] ca. 22 %[3] ca. 22 %[3] - -
WACKER® TS 44 E ca. 4,5 - 7,5[1] ca. 4,5 - 7,5[1] - - Nonionic Nonionic - - ca. 39 %[5] ca. 39 %[5] Milky Milky
说明
[1] pH value,  [2] Solids content,  [3] Solid content | Microwave oven,  [4] 固含量 | Microwave oven,  [5] Solid content 

Bestellen

Meine Medien


Zum Bestellformular

Vertriebskontakt

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
+1  888  922-5374 （电话）

Meine Favoriten

Meine Produkte