SILRES® BS 5140

$SILRES<sup>®</sup> BS 5140

SILRES® BS 5140 is an aqueous water-dilutable emulsion of an aminofunctional polydimethylsiloxane. It is used to impart water repellency to mineral insulation materials, especially binder-free mineral wool, so called Blowing Wool.

 


Properties

Beside the hydrophobation of binder free mineral wool, so called Blowing Wool, SILRES® BS 5140 can also be used at lower temperatures or for post-treatment of mineral wool.

After dilution with water, SILRES® BS 5140 should be applied to the freshly formed mineral fibres. The product can be diluted with any quantity of water. For the hydrophobation of mineral wool in terms of a post-treatment, the product should be directly applied to the mineral wool, e.g. by spraying.

The addition ratio based on the mineral fiber mass should be between 0.05 and 0.3 weight % (based on the weight of the dried final product). The quantity of SILRES® BS 5140 to be applied also depends on the desired water repellency of the final product; a general recommendation cannot be given. Individual tests must always be conducted in order to define the necessary quantities.

Storage

SILRES® BS 5140 must be stored in the tightly closed original container. The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemicals Middle East
Dubai Silicon Oasis s/n
0001 Dubai
United Arab Emirates
+971  4  709-9999 (Phone)
+971 4 709-9911  (Fax)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Order

My media


Go to order form

Sales Contact


My favorites

My products