This content is for France. Our system has detected that you are from United States. Do you want to set United States as your new country?

ELASTOSIL® RT 622 A/B

Pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature.


Eigenschaften

  • excellent mechanical properties
  • low hardness
  • meets the requirements of EN 45545-2:2020 for Hazard Level HL1 (requirement set R22), and for Hazard Level HL1 and HL2 (requirement set R23 and R24), respectively.

Spezifische Merkmale von ELASTOSIL® RT 622 A/B

  • Additionsvernetzend
  • Fließfähig
  • zweikomponentig


Important note: The platinum catalyst is in component B.


Important: A and B components may only be used together if they have the same batch number.


We recommend running preliminary tests to optimize conditions for the particular application.


Comprehensive instructions are given in our leaflet "ELASTOSIL® - PROCESSING RTV-2 SILICONE RUBBERS".


- all-round potting compound

- technical mouldings

- encapsulation of electronic components

- slot exit potting for electrical coils

Lagerung

The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Vertrieb & Support

Wacker Chimie S.A.S.
11, bis quai Perrache
69002 Lyon, France
Frankreich
+33  478  176-010 (Phone)
+33 478 176-019  (Fax)
Kontakt

Wie können wir Ihnen helfen?

  • Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Frage stellen

Would you like a product sample?

You can request a product sample here.

Request sample

Bestellen

Meine Medien


Zum Bestellformular

Vertriebskontakt

Wacker-Chemie Benelux B.V.
Heiligeweg 166
1561 DM Krommenie
+31  75  64760-00 (Phone)

Meine Favoriten

Meine Produkte