This content is for Brazil. Our system has detected that you are from United States. Do you want to set United States as your new country?

SILFOAM® eco SE 2060

SILFOAM® eco SE 2060, which contains 15 % active ingredient and 25 % solids, is a versatile antifoam that is comparatively rich in emulsifier and that can be easily metered due to its low viscosity, based on renewable raw materials according to TÜV NORD Standard REDcert².

Since it also possesses resistance to alkalis and acids, it may further be used in a wide range of applications in which pH is critical.


Properties

 SILFOAM® eco SE 2060 complies with US FIFRA regulations 40 CFR § 180.920 and can be applied for pre-harvest pesticide formulations. National regulations applicable in the countries concerned must be observed.

Specific features

• Emulsions

• Listed in EPA database

Processing

In general we recommend to stir the emulsion before use (approx. 3 minutes with a propeller stirrer at 200 – 400 rpm).

But be cautious: too high shear can break the emulsion.

The typical dosage is in the range of 0.05 to 0.5 % and is best determined by preliminary tests.

Application

SILFOAM® eco SE 2060 shows a very good foam control performance in formulations rich in surfactants.

Storage

The 'Best use before end' date of each batch is shown on the product label.

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Quimica do Brasil Ltda.
Rua Municipal, 325
06612-060 Jandira
Brazil
+55  11  4789-8300 (Phone)
+55 11 4789-8345  (Fax)
Contact
Website

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

Distributors

No distributors were found for this product

More products

Products Technical data
pH
SILFOAM® eco SE 2060 - -
SILFOAM® eco SE 3060 - -
SILFOAM® SE 1661 - -
SILFOAM® SE 1930 BR 5.5 - 8.5[1] 5.5 - 8.5[1]
SILFOAM® SE 2 - -
SILFOAM® SE 2060 - -
SILFOAM® SE 3060 - -
SILFOAM® SE 39 - -
SILFOAM® SE 47 - -
SILFOAM® SE 6 - -
SILFOAM® SRE - -
SILFOAM® SRE BR approx. 5 - 8[1] approx. 5 - 8[1]
Legend
[1] pH | Indicator strips 

Order

My media


Go to order form

Sales Contact

Wacker Quimica do Brasil Ltda.
Rua Municipal, 325
06612-060 Jandira
+55  11  4789-8300 (Phone)

My favorites

My products