This content is for China (Mainland). Our system has detected that you are from United States. Do you want to set United States as your new country?
DEHESIVE® PSA 630 T
DEHESIVE® PSA 630 T is a solvent based Silicone Pressure Sensitive Adhesive intended in particularly for coating on films, but also other substrates.
Properties
- excellent surface tack
- high adhesion levels
- high flexibility
- excellent thermal stability
- good resistance to moisture, weathering and ageing
Specific features of DEHESIVE® PSA 630 T
- Solvent-based
Data sheets
DEHESIVE® PSA 630 T can be used for coating of several film-substrates such as Polyester, Polyamide, Polyimide and others substrates for manufacture of different silicone pressure sensitive adhesive tapes and other articles.
Processing
DEHESIVE® PSA 630 T can be diluted with aliphatic or aromatic solvent (e.g. toluene, white spirit, naphtha). It is typically blended with addition curing silicone PSA system (e.g. DEHESIVE® PSA 765). For an optimum balance of surface tack, adhesion strength and cohesive strength it is necessary to cure the coated DEHESIVE® PSA 630 T for 1 – 2 min. at 140 – 150°C by using additing DEHESIVE® 765 and catalyst C05 or PT 5. It is recommended to remove the solvent before curing process at 80 – 90 °C for ~0.5 min. Higher temperature can cause incorporation of the solvent into the adhesive film, which can impair the adhesive properties.
Storage
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Sales and support
200233 Shanghai
China (Mainland)
+86 21 6130-2500 (Fax)
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Distributors
No distributors were found for this product
More products
There are no comparable products