ELASTOSIL® LR 3078/50 A/B
ELASTOSIL® LR 3078 grades are self-adhesive, paste-like, easily-pigmentable two-component liquid silicone rubbers with extremely short curing times. Their vulcanizates are noted for excellent mechanical and electrical properties.
The ELASTOSIL® 3078 series is also designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY.
Properties
ELASTOSIL® LR 3078 grades are a primerless, self-bonding series that adhere to polycarbonate (PC) and various high-performance plastics substrates (e.g. Polyarylethersulfones (PESU, PSU, PPSU)). Because of the individual surface properties each substrate must be tested before mass production.
For further information on tested material combinations please refer to the corresponding adhesion tables which are available upon request from the responsible sales manager.
ELASTOSIL® LR 3078 series is characterized by a very low tendency of mold deposition.
ELASTOSIL® LR 3078 series meets selected test requirements of ISO 10993 and United States Pharmacopoeia (USP) Class VI. It is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY including implantation for < 30 days.
Specific features of ELASTOSIL® LR 3078/50 A/B
- Self-adhesive
Data sheets
ELASTOSIL® LR 3078 series is particularly suitable for the economical production of large series of overmolded parts (thermoplastic/elastomer), even in a comolding process (shuttle mold) under standard conditions, without any special treatment of the mold surface.
Parts made from ELASTOSIL® LR 3078 can generally be used for technical applications and medical applications.
The following studies were performed on vulcanizates of ELASTOSIL® 3078 series according to ISO 10993:
- Cytotoxicity (ISO 10993-5)
- Sensitation LLNA (ISO 10993-10)
- Pyrogenicity (ISO 10993-11)
The following studies were performed on vulcanizates of ELASTOSIL® 3078 series according to USP class VI:
- Acute systemic toxicity
- Intracutaneous toxicity
- Implantation test
No adverse effects have been detected at any of the studies performed.
The A and B components are delivered ready to use in 20 kg pail and 200 kg drum kits. With adequate metering equipment, they can be pumped directly from the original containers into the injection molding machine and mixed by a static mixer. The mixing ratio is 1 : 1. At room temperature, mixtures of A and B components have a pot life of at least three days.
Note: If necessary, the start-up of new molds can be supported by use of ELASTOSIL® AUX Mold Release Agent 32.
For detailed information refer to our brochure "SOLID AND LIQUID SILICONE RUBBER - MATERIAL AND PROCESSING GUIDELINES".
Packaging
This product is available in 20 kg pail and 200 kg drum kits.
Storage
Once opened, containers should always be resealed after use to prevent the platinum catalyst from being poisoned by amines, sulphur or phosphorus compounds. For detailed information about storage conditions please refer to the latest edition of our brochure "SOLID AND LIQUID SILICONE RUBBER - MATERIAL AND PROCESSING GUIDELINES". The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Sales and support
Bracknell RG12 1WA
United Kingdom
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Distributors
WACKER has a global network of specialist distributors at its disposal. Please select an application so that we can suggest suitable contacts.