ETONIS® 7622 A (CTY)
ETONIS® 7622 A (CTY) is a vinyl acetate/ethylene copolymer powder with high ethylene content that makes the polymer soft and elastic and is used in both hot and cold asphalt applications. ETONIS® 7622 A (CTY) is a polymer powder with a low glass transition temperature (Tg) that remains flexible down to temperatures below freezing and is suitable for end products with low emissions.
Properties
Hot asphalt
ETONIS® 7622 A (CTY), when used in combination with SBS-type polymers, makes hot asphalt binders easier to process and pump because it reduces the viscosity and generally lowers the processing and application temperatures. Further, ETONIS® 7622 A (CTY) helps with faster cooling of a polymer-modified asphalt batch. It significantly improves adhesion to aggregate, improves low temperature flexibility, bleeding and phase segregation. A VAE/SBS modified binder improves adhesion to aggregate and increases the overall toughness and durability. ETONIS® 7622 A (CTY) has a plasticizing effect in modified asphalts and improves workability without compromising performance properties.
Cold asphalt
In cold asphalt emulsions, ETONIS® 7622 A (CTY) is compatible with both cationic and anionic systems. ETONIS® 7622 A (CTY) improves rheology, adhesion, tack, enhances flexural strength, flexibility, drying, abrasion and oil resistance.
Practical benefits
ETONIS® 7622 A (CTY) is a solid polymer, so transport costs are less than for liquid dispersions. Using ETONIS® 7622 A (CTY) cuts overall energy costs due to easier processing and lower temperature application.
Data sheets
ETONIS® 7622 A (CTY) is suitable for modifying both hot asphalt binders in combination with SBS-type polymers as well as anionic and cationic cold asphalt emulsions. It is used in waterproofing, roofing, hot mix paving, tack coat, chip seal, fog seal, scrub seal, microsurfacing and sealers, and other asphalt applications.
Processing
Hot asphalt
ETONIS® 7622 A (CTY) may be added in powder form either to the hot asphalt binder at any time in the process with either paddle or high shear mixing. Mixing and pumping the hot asphalt binder causes the polymer powder to redisperse rapidly and blend with both the SBS and asphalt binder. Typically 25 wt. % of SBS is replaced with ETONIS® 7622 A (CTY) to enhance hot asphalt binders. The amounts used in special applications for higher ductility and elongation may be considerably higher. The exact amount will depend on the requirements profile.
Cold asphalt
ETONIS® 7622 A (CTY) may be used with both anionic and cationic asphalt emulsions. When using with cold asphalt emulsions, ETONIS® 7622 A (CTY) may first be mixed with gauging water and then added to the asphalt emulsion or may be added as a powder directly to the asphalt emulsion. Protracted stirring of the polymer/water mixture is apt to cause individual components to settle out, but brief mixing will produce a homogenous mixture again. The amount of ETONIS® 7622 A (CTY) needed to modify cold asphalt emulsions ranges from 2.5 - 5.0 % v/v relative to the asphalt emulsion. The amounts used in special applications for improved ductility, flexibility and elongation may be considerably higher. The exact amount will depend on the requirements profile.
If ETONIS® 7622 A (CTY) is used in applications other than those mentioned, the choice, processing and use of ETONIS® 7622 A (CTY) is the sole responsibility of the purchaser. All legal and other regulations must be complied with. Slight discoloration may occur without impairing the product’s functionality.
Packaging
25 kg paper bags. Other sizes on request.
Storage
During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30°C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.
Sales and support
Bracknell RG12 1WA
United Kingdom
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.