This content is for United Kingdom. Our system has detected that you are from United States. Do you want to set United States as your new country?

LIOSIL® TS 405 E

$LIOSIL<sup>®</sup> TS 405 E

LIOSIL® TS 405 E is a microemulsion of a functional silicone fluid that was developed specially as a softener for the tissue industry. LIOSIL® TS 405 E has a low solid content.


Properties

Owing to its special structure and orientation on cellulose fibers, LIOSIL® TS 405 E is characterized by an very good soft hand at good hydrophilicity.

- good soft hand combined with excellent hydrophilicity
- dilutable with water, but we recommend direct use
- low viscosity
- high substantivity on cellulose fibers
- microemulsion


The product amount should be tailored to the particular tissue being used. Typically the amount of product applied on the tissue is in the range from 1 and 5 g/m². For the application of LIOSIL® TS 405 E common technologies like roll coating, slot coating, spraying, or rotor damping systems are recommended. Aerosol formation has to be avoided. In case of aerosol formation special protective measures are required (see material safety data sheet).


The use of the emulsion is recommended for all conventional tissue types such as toilet paper, facial tissue, handkerchiefs or cosmetic wipes, which may benefit from a certain soft feel. The emulsion can be combined with other organic softeners or well being additives, too, provided an adequate compatibility test has been performed. If substantial foaming occurs during processing,  we recommend our SILFOAM® antifoam agents.

Storage

The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemicals Ltd.
2 Arlington Square, Downshire Way
Bracknell RG12 1WA
United Kingdom
+44  1344  401 670 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

More products

Products Technical data
pH Content Appearance
LIOSIL® TS 1010 E - - approx. 33 %[1] approx. 33 %[1] - -
LIOSIL® TS 405 E - - approx. 8 %[1] approx. 8 %[1] - -
LIOSIL® TS 5002 E - - approx. 16 %[1] approx. 16 %[1] - -
LIOSIL® TS 533 - - approx. 35 %[1] approx. 35 %[1] - -
LIOSIL® TS 533 E US approx. 5[2] approx. 5[2] approx. 35 %[1] approx. 35 %[1] Colorless, clear Colorless, clear
LIOSIL® TS 913 E - - approx. 22 %[1] approx. 22 %[1] - -
Legend
[1] Solid content | Microwave oven,  [2] pH value | Indicator strips 

Order

My media


Go to order form

Sales Contact

Wacker Chemicals Ltd.
2 Arlington Square, Downshire Way
Bracknell RG12 1WA
+44  1344  401 670 (Phone)

My favorites

My products