此内容适用于中国大陆。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？

VINNAPAS® eco DP 55 (XX MB)

$VINNAPAS<sup>®</sup> eco DP 55 (XX MB)

VINNAPAS® eco is a fossil resources saving product, where a specific share of the fossil-based raw materials required for manufacturing of this product can be replaced by certified sustainable renewable feedstock. The substitution is based on the REDcert² mass balance approach, audited by an independent third party.

 

The exact amount of fossil raw material replaced depends on the selected product version and is specified in the corresponding certificate. Please contact your WACKER representative or visit the product page on the WACKER website www.wacker.com for additional information regarding WACKER’s products or sustainability efforts, including mass balance.


Properties

  • Fast setting
  • Low-viscosity PVOH-stabilized homopolymer

If the product is used in applications other than those mentioned, the choice, processing and use of the product is the sole responsibility of the purchaser. All legal and other regulations must be complied with.

For questions concerning food contact status according the chapter 21 CFR (US FDA) and German BfR, please feel free to contact us.

Wacker Chemie AG

Gisela-Stein-Strasse 1

81671 Munich

Germany

Storage

When the dispersion is stored in tanks, proper storage conditions must be maintained. VINNAPAS® eco DP 55 (XX MB) has shelf life of 6 months starting from the date of receipt if stored in the original, unopened containers at temperatures between 5 and 30 °C. Any longer periods for the maximum storage period that may be described in the Certificate of Analysis which accompanies each shipment of VINNAPAS® eco DP 55 (XX MB), take preference over this suggestion in which case the time period stated in the Certificate of Analysis shall be solely authoritative.

Iron or galvanized-iron equipment and containers are not recommended because the dispersion is slightly acidic. Corrosion may result in discoloration of the dispersion or its blends when further processed. Therefore the use of containers and equipment made of ceramics, rubberized or enameled materials, appropriately finished stainless steel, or plastic (e.g. rigid PVC, polyethylene or polyester resins) is recommended. As polymer dispersion may tend to superficial film formation, skins or lumps may form during storage or transportation. Filtration is therefore recommended prior to utilization of the product.

 

Preservation for Transport, Storage and further Processing

VINNAPAS® eco DP 55 (XX MB) is adequately preserved during transportation and storage if kept in the original, unopened containers. However, if it is transferred to storage tanks, the dispersion should be protected against microbial attack by adding a suitable preservative package.

Measures should also be taken to ensure cleanliness of the tanks and pipes. In unstirred tanks, a layer of preservative-containing water should be sprayed onto the surface of the dispersion to prevent the formation of unwanted skin and possible attack by microorganisms. The thickness of this water layer should be < 5 mm for low viscosity dispersions and up to 10-20 mm for high viscosity products. Proper procedures - periodic tank cleaning and sanitization - must be set up in order to prevent microbial attack. Contact your biocide representative/supplier for further plant hygiene recommendations. Measures should be taken to ensure that only clean air enters the tank when the dispersion is removed.

Finished products manufactured from polymer dispersions usually also require preservation. The type and scope of preservation will depend on the raw materials used and anticipated sources of contamination. The compatibility with other components and the efficacy of the preservative should always be tested in the respective formulation. Preservative manufacturers will be able to advise you about the type and dosage of preservative required.

 

Sales and support

Wacker Chemicals Ltd.
2 Arlington Square, Downshire Way
Bracknell RG12 1WA
United Kingdom
+44  1344  401 670 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

Distributors

WACKER has a global network of specialist distributors at its disposal. Please select an application so that we can suggest suitable contacts.

IMCD UK Ltd.
Times House, Throwley Way
SM1 4AF Sutton, Surrey
44  208  7707090 (Phone)
44 208 7707295   (Fax)
Contact distributor Website

更多产品

个产品 技术数据
固体含量 动力粘度 玻璃化温度
VINNAPAS® DP 500 48 - 52 % 48 - 52 % 30000 - 40000 mPa·s 30000 - 40000 mPa·s approx. 33 °C[1] approx. 91.4 °F[1]
VINNAPAS® DP 55 53 - 57 % 53 - 57 % 1500 - 4500 mPa·s 1500 - 4500 mPa·s approx. 33 °C[2] approx. 91.4 °F[2]
VINNAPAS® DP 600 58 - 62 % 58 - 62 % 29000 - 41000 mPa·s 29000 - 41000 mPa·s approx. 33 °C[1] approx. 91.4 °F[1]
VINNAPAS® eco DP 55 (XX MB) 53 - 57 % 53 - 57 % 1500 - 4500 mPa·s 1500 - 4500 mPa·s approx. 33 °C[3] approx. 91.4 °F[3]
VINNAPAS® EP 1 49 - 51 % 49 - 51 % 6000 - 12000 mPa·s 6000 - 12000 mPa·s approx. 1.0 °C[1] approx. 33.8 °F[1]
VINNAPAS® EP 11 (CGN) 49 - 51 % 49 - 51 % 4000 - 6000 mPa·s 4000 - 6000 mPa·s approx. 3 °C[1] approx. 37.4 °F[1]
VINNAPAS® EP 14 54 - 56 % 54 - 56 % 4000 - 7000 mPa·s 4000 - 7000 mPa·s approx. 3 °C[1] approx. 37.4 °F[1]
VINNAPAS® EP 17 59 - 61 % 59 - 61 % 2800 - 4800 mPa·s 2800 - 4800 mPa·s approx. 3 °C[1] approx. 37.4 °F[1]
VINNAPAS® EP 24 56 - 58 % 56 - 58 % 9000 - 15000 mPa·s 9000 - 15000 mPa·s approx. 3 °C[1] approx. 37.4 °F[1]
VINNAPAS® EP 400 54 - 56 % 54 - 56 % 2000 - 2800 mPa·s 2000 - 2800 mPa·s approx. 5 °C[1] approx. 41.0 °F[1]
VINNAPAS® EP 401 54 - 56 % 54 - 56 % 1700 - 3300 mPa·s 1700 - 3300 mPa·s approx. -7.0 °C[1] approx. 19.4 °F[1]
VINNAPAS® EP 441 53 - 57 % 53 - 57 % 3000 - 5000 mPa·s 3000 - 5000 mPa·s approx. 5 °C[1] approx. 41.0 °F[1]
VINNAPAS® EP 8010 58 - 61 % 58 - 61 % 4000 - 8000 mPa·s 4000 - 8000 mPa·s approx. -10 °C[1] approx. 14.0 °F[1]
VINNAPAS® EP 8041 52 - 55 % 52 - 55 % 5000 - 10000 mPa·s 5000 - 10000 mPa·s approx. -8 °C[3] approx. 17.6 °F[3]
VINNAPAS® H 65 64 - 66 % 64 - 66 % 20000 - 40000 mPa·s 20000 - 40000 mPa·s approx. 40 °C[1] approx. 104 °F[1]
说明
[1] 玻璃化温度 | 专用方法,  [2] Glass transition temperature Tg DSC | DSC, specific method,  [3] 玻璃化温度 | DSC, specific method 

Order

My media


Go to order form

Sales Contact

Wacker Chemicals Ltd.
2 Arlington Square, Downshire Way
Bracknell RG12 1WA
+44  1344  401 670 (Phone)

My favorites

My products