This content is for Israel. Our system has detected that you are from United States. Do you want to set United States as your new country?

VINNAPAS® 3030 H

VINNAPAS® 3030 H  is an excellent hydrophobic dispersible polymer powder for dry mix mortars, specifically suited for tile grouts, renders and plasters. It is based on a  flexible copolymer of vinyl chloride and ethylene. VINNAPAS® 3030 H belongs to the product class VINNAPAS® H which means that it provides a remarkable hydrophobic effect. It is well suited to be combined with classical VAE grades to introduce hydrophobicity.


Properties

  • VINNAPAS® 3030 H is a copolymer powder based on vinyl chloride and ethylene and is dispersible in water.
  • VINNAPAS® 3030 H is a polymeric binder and also provides an excellent hydrophobic effect.
  • Blended with inorganic binders, the powder will provide very good workability with VINNAPAS® 3030 H have improved adhesion, flexibility, deformability and abrasion resistance.
  • As a result of the hydrophobizing resin's special composition and specific production process, mortars modified with VINNAPAS® 3030 H confer extreme strong and lasting water repellency and markedly reduced water absorption of both, silicate and carbonate based mortars.
  • VINNAPAS® 3030 H will not have any effect on water-vapor transmission at common dosages.
  • VINNAPAS® 3030 H contains a fine mineral filler as an antiblocking agent.
  •  
  • VINNAPAS® 3030 H is a dispersible polymer powder in the lower Tg range and with a very strong hydrophobic effect. It has no effect on rheology and has excellent hydrophobic properties.

Specific features of VINNAPAS® 3030 H

  • Hydrophobic

For typical application fields of VINNAPAS® 3030 H, refer to the section "application". Please discuss additional applications with your WACKER customer representative.

Processing 

For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 3030 H with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.


 

If the product is used in applications other than those mentioned, the choice, processing and use of it is the sole responsibility of the purchaser. All legal and other regulations must be complied with.

Slight color variations of the polymer granulate may occure without impairing the product's functionality.

Packaging

25 kg paper bags
Big Bags or bulk on request.

Storage

During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.

Sales and support

Wacker Kimya Ticaret Limited Şirketi
Tevfik Fikret Cad. No: 32/4
34750 Ataşehir / Istanbul
Türkiye
+90  216  569-7050 (Phone)
+90 216 569-8210  (Fax)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

More products

Products Technical data
Minimum film forming temperature
VINNAPAS® 3030 H 0 °C[1] 32.0 °F[1]
VINNAPAS® 5048 H 0 °C[1] 32.0 °F[1]
VINNAPAS® 5518 H 4 °C[1] 39.2 °F[1]
VINNAPAS® 7031 H 0 °C[1] 32.0 °F[1]
VINNAPAS® 8031 H 0 °C[1] 32.0 °F[1]
VINNAPAS® 8034 H 0 °C[1] 32.0 °F[1]
Legend
[1] Minimum film forming temperature | DIN ISO 2115 

Order

My media


Go to order form

Sales Contact

Wacker Kimya Ticaret Limited Şirketi
Tevfik Fikret Cad. No: 32/4
34750 Ataşehir / Istanbul
+90  216  569-7050 (Phone)

My favorites

My products