This content is for China (Mainland). Our system has detected that you are from United States. Do you want to set United States as your new country?

SILPURAN® 2117 A/B

Two-component, addition-curing silicone composition curing to a soft silicone adhesive


Eigenschaften

  • biocompatible, certificates of compatibility with USP Class VI and ISO 10993 available on request
  • no by-products from curing process
  • medium viscosity, pourable
  • mixing ratio 1 : 1
  • very good adhesion, typical value 3.0 N/2.5 cm (90° peel test, on stainless steel)
  • high transparency

Spezifische Merkmale von SILPURAN® 2117 A/B

  • Additionsvernetzend
  • biokompatibel
  • Hautverträglich
  • zweikomponentig

SILPURAN® 2117 A/B can be used as a skin adhesive in medical applications.

It is especially suitable for bonding external mammary prostheses to the patient’s skin.

Components A and B of SILPURAN® 2117 A/B are mixed homogeneously in a ratio A : B = 1 : 1 and vulcanize rapidly at temperatures over 100 °C.

SILPURAN® 2117 A/B has good adhesive properties that can be adjusted to suit the relevant requirements:
Increasing the proportion of component A results in a softer vulcanisate and increased tackiness. Increasing the proportion of component B results in a harder vulcanisate and reduced tackiness.

Important note:
The platinum catalyst is contained in component A.

Caution:
Only components A and B with the same lot number may be processed together!
 

Lagerung

The 'Best use before end' date of each batch is shown on the product label.


Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Vertrieb & Support

Wacker Chemie AG
Heilbronner Strasse 74
70191 Stuttgart
Germany
+49  711  61942-0 (Phone)
Kontakt

Wie können wir Ihnen helfen?

  • Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Frage stellen

Would you like a product sample?

You can request a product sample here.

Request sample

More products

Products Technical data
dynamische Viskosität Viscosity, dynamic Penetration
SILPURAN® 2100 A/B - - 34000 mPa·s[1] 34000 mPa·s[1] 205 1/10mm[3] 205 1/10mm[3]
SILPURAN® 2112 A/B 11600 mPa·s[2] 11600 mPa·s[2] - - 225 1/10mm[3] 225 1/10mm[3]
SILPURAN® 2114 A/B 12000 mPa·s[2] 12000 mPa·s[2] - - 200 1/10mm[3] 200 1/10mm[3]
SILPURAN® 2114 OT A/B 12000 mPa·s[2] 12000 mPa·s[2] - - 170 1/10mm[3] 170 1/10mm[3]
SILPURAN® 2117 A/B 33000 mPa·s[2] 33000 mPa·s[2] - - 205 1/10mm[3] 205 1/10mm[3]
SILPURAN® 2124 A/B - - 3200 mPa·s[1] 3200 mPa·s[1] 155 1/10mm[3] 155 1/10mm[3]
SILPURAN® 2130 A/B - - 1000 mPa·s[1] 1000 mPa·s[1] 220 1/10mm[3] 220 1/10mm[3]
Legend
[1] Viscosity, dynamic | DIN EN ISO 3219,  [2] dynamische Viskosität | DIN EN ISO 3219,  [3] Penetration | DIN ISO 2137 | hollow cone of 62.5 g, 60 s 

Bestellen

Meine Medien


Zum Bestellformular

Vertriebskontakt

Wacker Chemie Italia S.r.l.
Via S. Bovio 3
20054 Segrate (MI)
+39  02  51752-1 (Phone)

Meine Favoriten

Meine Produkte