This content is for Uganda. Our system has detected that you are from United States. Do you want to set United States as your new country?

DEHESIVE® 811

DEHESIVE® 811 is a solvent-based condensation curing silicone recommended for release coatings.


Properties

  • Low COF
  • Good release stability after post cure
  • Good bath life
  • Excellent anchorage to a wide variety of substrates
  • Excellent anchorage to polyester films
  • Suitable for coating PP and PE films and PE-coated paper

Specific features of DEHESIVE® 811

  • Polymer
  • Silicone Fluid
  • Solvent-based

DEHESIVE® 811 may be used for coating of PE-laminated paper, polyester films (PET) and papers.

 

Processing:

Generally DEHESIVE® 811 is diluted to give a formulation with an active substance content of about 5 %. However, depending on the substrate and coater system, DEHESIVE® 811 may be used with lower or higher active substance contents.

 

Batches of coating compound must be prepared in the
order given below.

 

1. First pour in DEHESIVE® 811
2. Add solvent and stir slowly until the mixture is homogeneous
3. Thoroughly stir in Crosslinker V 24 to this mixture
4. Thoroughly stir Crosslinker V 84 to this mixture
5. Slowly stir in catalyst C 80

 

Suitable solvents are aliphatic and aromatic hydrocarbons (e.g. toluene, white spirit), esters and ketones.

 

The cure speed depends on the formulation, type of substrate, quality of solvent, the chosen temperature and the effectiveness of the oven.

 

Laboratory trials are recommended prior to using the material in production in order to verify that the vulcanization performance suits the intended application.

Storage

The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemicals Middle East
Dubai Silicon Oasis s/n
0001 Dubai
United Arab Emirates
+971  4  709-9999 (Phone)
+971 4 709-9911  (Fax)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

Distributors

No distributors were found for this product

More products

Products Technical data
Viscosity, dynamic
DEHESIVE® 811 approx. 12000 mPa·s[1] approx. 12000 mPa·s[1]
DEHESIVE® ADDITIVE R2 approx. 200[1] approx. 200[1]
Legend
[1] Viscosity, dynamic | 25 °C  

Order

My media


Go to order form

Sales Contact

Wacker Chemie AG
Gisela-Stein-Strasse 1
81671 Munich
+49  89  6279-0 (Phone)

My favorites

My products