This content is for United States. Our system has detected that you are from United States. Do you want to set United States as your new country?

WACKER® FINISH WT 1650 LV

WACKER® FINISH WT 1650 LV is a non-reactive aminoethyl-aminopropylfunctional polydimethylsiloxane.
 


Properties

WACKER® FINISH WT 1650 LV is particularly suitable as active substance in softener formulations for the impregnation of
fibers and textiles.
WACKER® FINISH WT 1650 LV imparts a very soft, drapable, and elastic touch to woven and knitted fabrics. WACKER®
WACKER® FINISH WT 1650 LV is considered to be the best softening agent for PES - knitwear.
WACKER® FINISH WT 1650 LV improves the wash-and-wear properties and the crease recovery angle, sewability and tear
strength and reduces abrasion loss. The effects are fast to washing and dry cleaning.
WACKER® FINISH WT 1650 LV has little effect on the degree of whiteness in a softener formulation when usual application conditions are adhered to. As a rule no adverse effect on the the shade or colour fastness properties of coloured goods is
observed.

Data sheets

Processing:
WACKER® FINISH WT 1650 LV can be applied neat, from solution or emulsion. Suitable solvents are aliphatic and aromatic
hydrocarbons, chlorinated hydrocarbons, esters, higher alcohols and ketones.
Most textile processes are water based. Hence WACKER® FINISH WT 1650 LV is mainly applied from emulsion. WACKER® FINISH WT 1650 LV is suitable for the formulation of microemulsions and macroemulsions.
WACKER® FINISH WT 1650 LV can be used as sole active substance in softener emulsions or in combination with other
components, e.g. paraffines, esters of fatty acids, etc. Compatability of the components has to be checked in each
individual case.
Emulsions of WACKER® FINISH WT 1650 LV LV are diluted to the optimum concentration for the specific fabric. Application can be done by padding or exhaustion.

Storage

Store in a cool dry place.
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case
however, the properties required for the intended use must be checked for quality assurance reasons.
 

Sales and support

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
United States
+1  888  922-5374 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

Distributors

No distributors were found for this product

More products

Products Technical data
Amine number Amine number/Amine Value Viscosity, dynamic Appearance
JETSOFT® CONCENTRATE approx. 0.65 ml 1 N HCI/g[1] approx. 0.65 ml 1 N HCI/g[1] - - approx. 3000 mPa·s[2] approx. 3000 mPa·s[2] yellowish turbid fluid yellowish turbid fluid
WACKER® AF 21 - - 0.18/10 0.18/10 1000 - 8000 mPa·s 1000 - 8000 mPa·s Clear , yellowish oil Clear , yellowish oil
WACKER® AF 23 - - approx. 0.30/17 approx. 0.30/17 3000 - 6000 mPa·s 3000 - 6000 mPa·s clear liquid clear liquid
WACKER® AF 36 - - approx. 0.13/7[8] approx. 0.13/7[8] 2000 mPa·s[3] 2000 mPa·s[3] clear, light yellow liquid clear, light yellow liquid
WACKER® FC 382 - - - - 150 - 700 cP[3] 150 - 700 cP[3] Clear to slightly hazy[7] Clear to slightly hazy[7]
WACKER® FINISH CT 34 E - - - - - - clear, opaque clear, opaque
WACKER® FINISH CT 95 E - - - - - - clear, opaque clear, opaque
WACKER® FINISH CT 96 E - - - - - - clear, opaque clear, opaque
WACKER® FINISH WR 1200 approx. 0.24 ml 1 N HCI/g approx. 0.24 ml 1 N HCI/g - - approx. 7000 mPa·s[4] approx. 7000 mPa·s[4] clear to slightly turbid fluid clear to slightly turbid fluid
WACKER® FINISH WR 1300 approx. 0.3 ml 1 N HCI/g approx. 0.3 ml 1 N HCI/g - - approx. 1000 mPa·s[4] approx. 1000 mPa·s[4] clear to slightly turbid fluid clear to slightly turbid fluid
WACKER® FINISH WR 301 approx. 0.27 ml 1 N HCI/g approx. 0.27 ml 1 N HCI/g - - approx. 1000 mPa·s[4] approx. 1000 mPa·s[4] clear to slightly turbid fluid clear to slightly turbid fluid
WACKER® FINISH WT 1650 LV approx. 0.6 ml 1 N HCI/g approx. 0.6 ml 1 N HCI/g - - approx. 1000 mPa·s[5] approx. 1000 mPa·s[5] clear to slightly turbid fluid clear to slightly turbid fluid
WETSOFT® CTA approx. 0.2 ml 1 N HCI/g approx. 0.2 ml 1 N HCI/g - - 2000 - 5000 mPa·s[6] 2000 - 5000 mPa·s[6] clear to slightly turbid yellowish fluid clear to slightly turbid yellowish fluid
WETSOFT® eco LV 810 approx. 0.25 ml 1 N HCI/g approx. 0.25 ml 1 N HCI/g - - 1000 - 6000 mPa·s[4] 1000 - 6000 mPa·s[4] clear to slightly turbid yellowish liquid clear to slightly turbid yellowish liquid
WETSOFT® LV 750 - - - - - - milky-white to slightly yellowish milky-white to slightly yellowish
WETSOFT® LV 810 approx. 0.25 ml 1 N HCI/g approx. 0.25 ml 1 N HCI/g - - 1000 - 6000 mPa·s[4] 1000 - 6000 mPa·s[4] clear to slightly turbid yellowish liquid clear to slightly turbid yellowish liquid
WETSOFT® NE 810 approx. 0.25 ml 1 N HCI/g approx. 0.25 ml 1 N HCI/g - - 2000 - 7000 mPa·s[4] 2000 - 7000 mPa·s[4] clear to slightly turbid yellowish liquid clear to slightly turbid yellowish liquid
Legend
[1] Amine number substance,  [2] Viscosity, dynamic | 25 °C | acc. ISO 2555,  [3] Viscosity, dynamic | 25 °C ,  [4] Viscosity, dynamic | 25 °C | DIN 53019,  [5] Viscosity, dynamic | DIN 53019,  [6] Viscosity, dynamic | Brookfield | acc. ISO 2555,  [7] Appearance | 25 °C ,  [8] Amine number/Amine Value | WSTM 1297 

Order

My media


Go to order form

Sales Contact

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
+1  888  922-5374 (Phone)

My favorites

My products