此内容适用于中国大陆。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？

很抱歉，本产品在中国大陆无货。请使用产品搜索或联系 我们。

VINNAPAS® 4016 N

VINNAPAS® 4016 N is a hard dispersible polymer powder based on vinyl acetate and ethylene for very good tensile adhesion strength on inorganic surfaces combined with good workability. VINNAPAS® 4016 N was developed for those applications where lower water demand and increased smoothness under the trowel are important.


特性

  • VINNAPAS® 4016 N is a copolymer powder of vinyl acetate and ethylene and is dispersible in water.
  • Compounds modified with VINNAPAS® 4016 N exhibit improved adhesion, flexural strength, deformability, abrasion resistance and easier handling. Leveling, thixotropy and water retention are essentially unaffected.
  • The product is ideal for use in combination with other mortar additives intended to enhance specific properties.
  • VINNAPAS® 4016 N contains a fine mineral filler as an anti-blocking agent.
  • It is produced without the addition of organic solvents, plasticizers and film-forming agents.
  • VINNAPAS® 4016 N is a hard general-purpose powder and has no effect on rheological properties. It is eminently suitable for formulating compounds of high ultimate strength.


For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 4016 N with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.


For typical application fields of VINNAPAS® 4016 N, refer to the "Application" section. Please discuss additional applications with your WACKER customer representative.

包装

25 kg paper bags
Big Bags or bulk on request.

储存

可再分散乳胶粉产品在储存期间必须进行防潮处理. 产品在高于30°C的温度下较长时间存放时, 尤其在此期间受压、受潮或受到日光照射后, 可能会出现结块现象. 产品在开封后应妥善地密封好后存放. 建议在仓库中存放可再分散乳胶粉产品, 并将其放置在阴凉干燥处. 可再分散乳胶粉产品的储存期不要超过六个月(自交付之日起算), 除非产品检测报告中规定了不同的日期（该日期优先适用）. 如果可再分散乳胶粉产品被存放的时间超过了建议的期限, 该产品可能仍然可以使用, 但是在这种情况下, 我们建议客户在使用该产品前对产品的性能是否满足预期用途的要求进行检测.

销售和支持

Wacker Chemicals (China) Co.,Ltd.
Caohejing Hi-Tech Park
200233 Shanghai
中国大陆
+86  21  6130-2000 （电话）
+86 21 6130-2500  （传真）
Contact Sales

我们可以为您提供什么帮助？

  • 您在选择产品方面需要帮助或者需要技术咨询？ 请联系我们的专家
Ask a question

您是否需要产品样本？

您可以在此处索取产品样本。

索取样本

更多产品

请选择一个应用程序查看您的产品匹配。

购物车

我的媒体


转至订单表

联系方式

Wacker Chemicals (China) Co.,Ltd.
Caohejing Hi-Tech Park
200233 Shanghai
+86  21  6130-2000 （电话）

收藏夹

我的产品