LUMISIL® 015FC A/B
LUMISIL® 015FC A/B is a 2-part silicone gel(1:1) that is specially designed for injection dispensing systems with low viscosity by room temperature cure or heat conditions for displays.
特性
- Excellent flowability and self-leveling with low viscosity
- Fast cure at low temperature (RT~70°C)
- Good optical performance
- Remarkable high reliability
- Excellent thermal stability
- Low shrinkage
LUMISIL® 015FC A/B的特殊性能
- 加成固化
- 双组分
- 无化学收缩
- 易流动的
- 温度适中情况下快速固化
- 高温下快速固化
- 高透明度
In mass production, Degassing is essentional process before mixing of materials.
Curing speed can be adjusted by temperature and time. Heat can accelerate curing process.
We recommend running preliminary tests to optimize conditions for particular application.
All surfaces must be clean and free of contaminants that will inhibit the cure of the product
Examples of inhibiting contaminants are sulfer containing materials, plasticizers, urethanes, amine containing materials and organometallic compounds especially organotin compounds.
If a substrate’s ability to inhibit cure is unknown, a small scale test should be run to determine compatibility.
Part A : Part B = 1 : 1
储存
The 'Best use before end' date of each batch appears on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable.
In this case however, the properties required for the intended use must be checked for quality assurance reasons.