Dieser Inhalt ist für Deutschland bestimmt. Unser System hat erkannt, dass Sie aus USA kommen. Wollen Sie USA als neues Land setzen?

LC 104 WHITE KOREA

WACKER® LC104 is VAE (Vinyl Acetate Ethylene copolymer) water-based sealant suitable for internal cracks exposed to little or no movement. once dried it can be painted if desirable.


特性

  • Excellent workability
  • Paint applicable
  • No odor(no bad smell)
  • Water based

Application Fields

  • Crack repairing
  • Paintable joint sealing
  • Joint sealing around indoor plaster

Processing 

  • Preparation - The substrate areas that will be in contact with the sealant must be clean. For application
  • Masking - To avoid contamination and damage attach a masking tape on the side of work area.
  • Primer - Non-pored substance needs primer treatment at first.
  • Sealing & Tooling - Fully fill in cross point or side edge point of the joint without empty space without bubbles.
  • Curing - Protect from dust and pollutant to have qualified surface and avoid being damaged on the surface of sealant while curing

Certification

  • WACKER® LC 104 is certified and classified ISO 11600 F-12.5E  

Restrictions on use

  • It is the user's responsibility to test the compatibility of the sealant with the adjoining materials. Incompatible substances like coating materials (paints, varnishes, and glazes) or organic plasticizer containing rubbers (EPDM, butyl and neoprene) can lead to discoloration or other impairments like loss of adhesion of the sealant. Materials in direct contact with the applied sealant like cleaning agents and materials in indirect contact like gaseous emissions can damage the sealant in its function or change its appearance. Because of the multitude of these materials. Wacker cannot make a general statement to the compatibility of materials with the sealant. In case of doubt the user shall conduct appropriate preliminary tests.
  • WACKER® LC 104 must not be used for insulating glass applications.
  • WACKER® LC 104 should not be used in contact with metals such as lead, copper, brass or zinc due to corrosion.
  • WACKER® LC 104 may be discolored in contact with some WACKER® LC 1100, e.g. EPDM, APTK and neoprene.
  • WACKER® LC 104 should not be used for sealing of aquaria.
  • WACKER® LC 104 is not recommended for use on natural stone, such as marble, granite, quartzite, as it can cause staining.
  • WACKER® LC 104 is not recommended for structural glazing bonding.
  • WACKER® LC 104 should not be used in contact with metals such as lead, copper, brass, or zinc due to corrosion.
  • WACKER® LC 104 is not recommended for sealing of aquaria or for longer-term use under water.
  • WACKER® LC 104 is not suitable for food grade applications where the joints are likely to come in contact with food.
  • WACKER® LC 104 is not suitable for use as a mirror adhesive.
  • The time until complete curing may be extended at lower temperature, lower humidity, increasing film thickness or by low volume of air exchange.

The use of tooling agents should be avoided if possible. Otherwise, water or a diluted solution of a little neutral soap or alcohol in water should be sparingly applied.

包装

  • Cartridge: 270ml (25ea/1box), Shelf life is 12 months from production date

储存

The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for theintended use must be checked for quality assurance reasons.

  • Should use before the expire day.
  • Avoid sun light, dry and cool at 5~30°C is recommended.
  • Should be keeping over 0°C.

销售和支持

Wacker Metroark Chemicals Pvt Ltd.
D.H. Road, Chandi
Kolkata 743503
印度
+91  33  24072-100 （电话）
+91 33 24072-502  （传真）
Contact Sales

我们可以为您提供什么帮助？

  • 您在选择产品方面需要帮助或者需要技术咨询？ 请联系我们的专家
Ask a question

您是否需要产品样本？

您可以在此处索取产品样本。

索取样本

More products

Products Technical data
Movement capability zulässige Gesamtverformung Skin Density Modulus at 100 % elongation
ELASTOSIL® 7100 P - - 25 %[1] 25 %[1] 25 min[6] 25 min[6] 1.03 g/cm³[8] 8.596 lb/gal[8] 0.38 N/mm²[10] 0.38 N/mm²[10]
ELASTOSIL® 7150 P - - 25 %[2] 25 %[2] 15 min[7] 15 min[7] 1.02 g/cm³[8] 8.512 lb/gal[8] 0.35 N/mm²[10] 0.35 N/mm²[10]
ELASTOSIL® 8000 N - - 35 %[3] 35 %[3] 25 min[6] 25 min[6] 1.02 g/cm³[8] 8.512 lb/gal[8] 0.37 N/mm²[10] 0.37 N/mm²[10]
ELASTOSIL® 8100 P 35 %[4] 35 %[4] - - 25 min[6] 25 min[6] 1.02 - 1.03 g/cm³[8] 8.512 - 8.596 lb/gal[8] 0.37 N/mm²[10] 0.37 N/mm²[10]
ELASTOSIL® 8510 P 25 %[5] 25 %[5] - - 15 min[7] 15 min[7] 1.02 g/cm³[8] 8.512 lb/gal[8] 0.35 N/mm²[10] 0.35 N/mm²[10]
ELASTOSIL® 9000 N - - 12.5 %[2] 12.5 %[2] 25 min[6] 25 min[6] 1.00 g/cm³[8] 8.345 lb/gal[8] 0.37 N/mm²[11] 0.37 N/mm²[11]
ELASTOSIL® eco 7770 P 25 %[5] 25 %[5] - - 15 min[7] 15 min[7] 1.02 g/cm³[8] 8.512 lb/gal[8] 0.35 N/mm²[10] 0.35 N/mm²[10]
ELASTOSIL® eco 8510 P 25 %[5] 25 %[5] - - 15 min[7] 15 min[7] 1.02 g/cm³[8] 8.512 lb/gal[8] 0.35 N/mm²[10] 0.35 N/mm²[10]
LC 104 WHITE KOREA 12.5 %[5] 12.5 %[5] - - - - 1.65 - 1.69 g/cm³[9] 13.77 - 14.104 lb/gal[9] - -
Legend
[1] zulässige Gesamtverformung | ISO 11600 / EN 15651,  [2] zulässige Gesamtverformung | ISO 11600,  [3] zulässige Gesamtverformung | ASTM C920,  [4] Movement capability | ASTM C920,  [5] Movement capability | ISO 11600,  [6] Skin forming time | 23 °C | 50 % r.h ,  [7] Skin formating time | 23 °C | 50 % r.h ,  [8] Density | 23 °C | ISO 1183-1 A,  [9] Density | 23 °C | DIN EN ISO 1183-1 A,  [10] Modulus at 100 % elongation | ISO 8339-A,  [11] Modulus at 100 % elongation | ISO 8339 

购物车

我的媒体


转至订单表

联系方式

Wacker Chemie India Pvt. Ltd.
Goregaon E,
Mumbai 400063
+91  22  42365-500 （电话）

收藏夹

我的产品