此内容适用于印度。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？
SILFOAM® SE 40
SILFOAM® SE 40 is a relatively heat-resistant, viscous, non-ionic antifoam emulsion.
特性
Conventional defoaming emulsions often form slightly oily deposits under the effect of heat during use. SILFOAM® SE 40 , on the other hand, is extremely stable, even at temperatures around boiling point.
数据表
SILFOAM® SE 40 is usually admixed with the formulations or liquors to be defoamed before the process begins, and extra may be added as necessary during the course of the process. To improve the accuracy of metering, SILFOAM® SE 40 can be prediluted with cold water in a ratio of 1:5 to 1:10. Preliminary tests should be carried out to ensure that SILFOAM® SE 40 is suitable for the application and to determine the amount required.
SILFOAM® SE 40 can be used in closed systems at a pH of between 3 an 11, and from ambient temperature up to 130 °C. SILFOAM® SE 40 is therefore generally recommended for critical systems, especially high-temperature and jet dyeing systems, in which it acts as a foam suppressant and deaeration agent. Apart from textile applications, it can also be used in processes that would be contaminated by the oily deposits formed when conventional antifoam agents are subject to effects such as heat, shearing or general compatibility problems.
包装
SILFOAM® SE 40 is available in
- 200 kg drums
- 950 kg IBC
储存
The "Best use before end" date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
销售和支持
Kolkata 743503
印度
+91 33 24072-502 （传真）