此内容适用于巴基斯坦。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？

ELASTOSIL® eco 7000 N

ELASTOSIL® eco 7000 N is a one-component, neutral-curing, low-modulus silicone sealant with outstanding adhesion and long shelf life for construction, glazing and window application as well as industrial applications.

ELASTOSIL® eco 7000 N is produced based on 100% exchange of the fossil-based raw materials by sustainably certified renewable materials

ELASTOSIL® eco 7000 N cures at room temperature in the presence of atmospheric moisture to give a permanently flexible silicone rubber.


特性

  •  100% silicone
  •  100% replacement of fossil-based raw materials by renewable raws
  •  long shelf life
  •  primerless adhesion to most materials
  •  non-corrosive to metals
  •  suitable for alkaline substrates such as concrete, mortar, fibrous cement
  •  almost odorless
  •  non-sag
  •  ready gunnability at low (+5 °C) and high (+40 °C) temperatures
  •  rapid crosslinking: quickly becomes tack-free
  •  flexible at low (-40 °C) and high temperatures (+180 °C)
  •  excellent weatherability
  •  excellent processing characteristics for professional use

ELASTOSIL® eco 7000 N的特殊性能

  • 烷氧基固化

Application fields

  •  sealing of connecting and expansion joints in the building industry
  •  glass and windows construction
  •  sealing of joints between glazing and supporting structure (frames, transoms, mullions)
  •  Industrial application as sealant in the automotive, aircraft and shipbuilding industries

 

Processing

The substrate areas that will be in contact with the sealant must be clean, dry and free of all loose material such as dust, dirt, rust, oil and other contaminants. Non-porous substrates should be cleaned with a solvent and a clean, lint-free, cotton cloth. Remove residual solvent before it evaporateFpaints with a fresh clean, dry cloth.

It is the responsibility of the user to test the compatibility of the sealant with the adjoining materials. Incompatible substances like coating materials (paints, varnishes and glazes) or organic plasticizer containing rubbers (EPDM, butyl and neoprene) can lead to discoloration or other impairments like loss of adhesion of the sealant. Materials in direct contact with the applied sealant like cleaning agents and materials in indirect contact like gaseous emissions can damage the sealant in its function or change its appearance. Even a longer period of time in the darkness white joints may show a slight yellowing.

Because of the multitude of these materials WACKER cannot make a general statement to the compatibility or adhesion of materials with the sealant. In case of doubt the user shall conduct appropriate preliminary tests.

The time until complete curing may be extended at lower temperature, lower humidity, increasing film thickness or by low volume of air exchange.

The work should only be carried out with sufficient fresh air supply. Wear appropriate protective clothing when processing.

 

Specification

ELASTOSIL® eco 7000 N is certified and classified according to

  • ISO 11600 F/G, class 25 LM
  • EN 15651-1, class 25LM F-EXT-INT-CC
  • EN 15651-2, class 25LM G-CC
  • BS 15651-1, class 25LM F-EXT-INT-CC
  • BS 15651-2, class 25LM G-CC
  • DIN 18545-2, class E
  • SNJF F / V, class 25E
  • ASTM C920, Type S, Grade NS, Class 50
  • EMICODE EC1 PLUS

 

Adhesion

ELASTOSIL® eco 7000 N exhibits excellent primerless adhesion to many non-porous siliceous materials, e.g. glass, tiles, ceramics, enamel, glazed tiles and clinker varnished or painted wood as well as many plastics.

Users must carry out their own tests due to the great variety of substrates. The adhesion can be improved in many cases by pretreatment of the substrates with a primer. If adhesion difficulties arise please contact our technical service.


Restrictions on use

ELASTOSIL® eco 7000 N must not be used for insulating glass applications

ELASTOSIL® eco 7000 N must not be used for structural glazing or bonding.

ELASTOSIL® eco 7000 N is not recommended for use on natural stones, such as marble, granite, quartzite, as it can cause staining.

ELASTOSIL® eco 7000 N is not recommended for the construction of aquaria.

ELASTOSIL® eco 7000 N is not suitable for food grade applications where the joints are likely to come in contact with food.

ELASTOSIL® eco 7000 N is not recommended for application in permanently wet areas where the joint is strongly or permanently exposed to water, e.g. in swimming pools or public sanitary facilities, please contact our technical service.

ELASTOSIL® eco 7000 N is not suitable for mirror mounting.

储存

The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

销售和支持

Wacker Chemicals Middle East
Dubai Silicon Oasis s/n
0001 Dubai
阿拉伯联合酋长国
+971  4  709-9999 （电话）
+971 4 709-9911  （传真）
Contact Sales

我们可以为您提供什么帮助？

  • 您在选择产品方面需要帮助或者需要技术咨询？ 请联系我们的专家
Ask a question

您是否需要产品样本？

您可以在此处索取产品样本。

索取样本

Mehr Produkte

Produkte Technische Daten
Movement capability zulässige Gesamtverformung Haut Dichte Modul bei 100% Dehnung
ELASTOSIL® eco 4000 25 %[1] 25 %[1] - - 20 min[5] 20 min[5] 1.02 g/cm³[6] 8.512 lb/gal[6] 0.35 N/mm²[7] 0.35 N/mm²[7]
ELASTOSIL® eco 4100 25 %[1] 25 %[1] - - 20 min[5] 20 min[5] 1.02 g/cm³[6] 8.512 lb/gal[6] 0.35 N/mm²[7] 0.35 N/mm²[7]
ELASTOSIL® eco 7000 N - - 25 %[2] 25 %[2] 25 min[5] 25 min[5] 1.03 g/cm³[6] 8.596 lb/gal[6] 0.38 N/mm²[7] 0.38 N/mm²[7]
ELASTOSIL® eco 7100 P - - 25 %[2] 25 %[2] 25 min[5] 25 min[5] 1.03 g/cm³[6] 8.596 lb/gal[6] 0.38 N/mm²[7] 0.38 N/mm²[7]
ELASTOSIL® eco 7750 N - - 50 %[3] 50 %[3] 20 min[5] 20 min[5] 1.40 g/cm³[6] 11.684 lb/gal[6] 0.40 N/mm²[7] 0.40 N/mm²[7]
ELASTOSIL® eco 8510 P - - 25 %[4] 25 %[4] 15 min[5] 15 min[5] 1.02 g/cm³[6] 8.512 lb/gal[6] 0.35 N/mm²[7] 0.35 N/mm²[7]
Mungo Green Polymer - - 25 %[2] 25 %[2] 25 min[5] 25 min[5] 1.03 g/cm³[6] 8.596 lb/gal[6] 0.38 N/mm²[7] 0.38 N/mm²[7]
Legend
[1] Movement capability | ISO 11600 / EN 15651,  [2] zulässige Gesamtverformung | ISO 11600 / EN 15651,  [3] zulässige Gesamtverformung | ASTM C920,  [4] zulässige Gesamtverformung | ISO 11600,  [5] Hautbildezeit | 23 °C | 50 % r.h ,  [6] Dichte | 23 °C | ISO 1183-1 A,  [7] Modul bei 100% Dehnung | ISO 8339-A 

购物车

我的媒体


转至订单表

联系方式

Wacker Chemicals Middle East
Dubai Silicon Oasis s/n
0001 Dubai
+971  4  709-9999 （电话）

收藏夹

我的产品