此内容适用于越南。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？
ELASTOSIL® RT 713
ELASTOSIL® RT 713 is a non-slump, addition-crosslinking, thermal-curing, one-component silicone rubber.
Properties
- ready-to-use, one-part system
- non-slump
- rapid heat cure
- low density
- low hardness
- high compressibility
- primerless adhesion to many substrates
Specific features of ELASTOSIL® RT 713
- Addition Curing
- Compressible
- Fast curing under heat
- Foam
- Non-slump
- One-component
Data sheets
- general-purpose sealant
- FIPG and CIPG applications
Surface preparation
All surfaces must be clean and free of contaminants that will inhibit the cure of ELASTOSIL® RT 713. Examples of inhibiting contaminants are sulfur containing materials, plasticizers, urethanes, amine containing materials and organometallic compounds – especially organotin compounds. If a substrate’s ability to inhibit cure is unknown, a small scale test should be run to determine compatibility.
Dispensing:
Because of the high thixotropy (shear thinning effect) ELASTOSIL® RT 713 can be dispensed easily with all dispensing equipments.
Curing:
ELASTOSIL® RT 713 works best when cured at 115 °C or more depending on the size and heat sink properties of the components.
ELASTOSIL® RT 713 shows good primerless adhesion to many substrates (metals, glass, ceramics, plastics). We recommend running preliminary tests to optimize conditions for the particular application.
Storage
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Sales and support
0001 Dubai
阿拉伯联合酋长国
+971 4 709-9911 (Fax)
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.