此内容适用于乌干达。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？

VINNAPAS® 7016 F

VINNAPAS® 7016 F is a superplasticizing dispersible polymer powder for dry mix mortars, specifically suited for self-leveling flooring compounds and screeds. It is based on a hard terpolymer of vinylacetate, ethylene and methyl methacrylate and belongs to the product class VINNAPAS® F which means that it improves the flow, leveling and surface properties.  Cured mortars with VINNAPAS® 7016 F have improved adhesion, flexural strength, deformability and abrasion resistance. 


特性

  • VINNAPAS® 7016 F is a copolymer powder of vinyl ester, ethylene and acrylate. It is dispersible in water and is also a highly effective superplasticizer with rheological properties similar to those of casein.
  • VINNAPAS® 7016 F shows an instant superplasticizing effect and very good self-healing properties in the modified fresh mortar.
  • VINNAPAS® 7016 F is ideal for formulating cementitious and gypsum-based flooring systems (e.g. self-leveling flooring compounds). Thereby the rheology of VINNAPAS® 7016 F is especially advantageous for the manual application.
  • VINNAPAS® 7016 F contains a fine mineral filler as an antiblocking agent and is produced without the addition of organic solvents, plasticizers and film-forming agents.
  • VINNAPAS® 7016 F is a high-quality hard polymeric binder and is also a highly effective superplasticizer with casein-like rheology. There is no need to add any commercial superplasticizer when 2-3 % VINNAPAS® 7016 F is added to a blend.
  • Furthermore it allows self-leveling flooring compounds to be formulated with a low content of volatile organic compounds (VOC). The product thus can be used to produce self-leveling flooring compounds conforming to strict eco-labeling requirements.

For typical application fields of VINNAPAS® 7016 F, refer to the section "application". Please discuss additional applications with your WACKER customer representative.

Processing

For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 7016 F with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.


 

如果产品不是用于我们推荐的应用, 则购买者应对该产品的选择、加工和使用负全部责任. 此外还应遵守所有的相关法律法规.

可再分散乳胶粉的颜色可能会有略微的变化, 但不会对产品的功能造成影响.

包装

25 kg paper bags
Big Bags or bulk on request.

储存

可再分散乳胶粉产品在储存期间必须进行防潮处理. 产品在高于30°C的温度下较长时间存放时, 尤其在此期间受压、受潮或受到日光照射后, 可能会出现结块现象. 产品在开封后应妥善地密封好后存放. 建议在仓库中存放可再分散乳胶粉产品, 并将其放置在阴凉干燥处. 可再分散乳胶粉产品的储存期不要超过六个月(自交付之日起算), 除非产品检测报告中规定了不同的日期（该日期优先适用）. 如果可再分散乳胶粉产品被存放的时间超过了建议的期限, 该产品可能仍然可以使用, 但是在这种情况下, 我们建议客户在使用该产品前对产品的性能是否满足预期用途的要求进行检测.

销售和支持

Wacker Chemie AG
Gisela-Stein-Strasse 1
81671 Munich
德国
+49  89  6279-0 （电话）
+49 89 6279-1770  （传真）
Contact Sales
网站

我们可以为您提供什么帮助？

  • 您在选择产品方面需要帮助或者需要技术咨询？ 请联系我们的专家
Ask a question

您是否需要产品样本？

您可以在此处索取产品样本。

索取样本

更多产品

个产品 技术数据
最低成膜温度
VINNAPAS® 4220 L 4 °C[1] 39.2 °F[1]
VINNAPAS® 4410 L 4 °C[1] 39.2 °F[1]
VINNAPAS® 5023 L 4 °C[1] 39.2 °F[1]
VINNAPAS® 5025 L 4 °C[1] 39.2 °F[1]
VINNAPAS® 5111 L 4 °C[1] 39.2 °F[1]
VINNAPAS® 5129 L 4 °C[1] 39.2 °F[1]
VINNAPAS® 5222 L 4 °C[1] 39.2 °F[1]
VINNAPAS® 7016 F 7 °C[1] 44.6 °F[1]
说明
[1] 最低成膜温度 | DIN ISO 2115 

购物车

我的媒体


转至订单表

联系方式

Wacker Chemie AG
Gisela-Stein-Strasse 1
81671 Munich
+49  89  6279-0 （电话）

收藏夹

我的产品