此内容适用于乌干达。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？
ELASTOSIL® A59 GRAY
ELASTOSIL® A59 GRAY is a self-levelling one-component, amine-cure formulation which cures at room temperature by reaction with air humidity to a flexible and durable silicone elastomer. It is particularly suited for screen printing on gaskets
Eigenschaften
- amine-curing system
- extended skin-over time
- cure accleration by temperature, further strong activation by CO2
- no use of organotin catalysts
- Recommended service temperature from -45 °C to +200 °C
Spezifische Merkmale von ELASTOSIL® A59 GRAY
- hitzebeständig
- niedrige Viskosität
- Selbstnivellierend
- ölbeständig
Datenblätter
Low viscous grade suitable as general purpose sealant for coating and potting, furthermore perfectly suited for screen printing applications for gaskets e.g cylinder head gaskets
ELASTOSIL® A59 GRAY is a one-part room temperature curing coating therefore the curing rate depends on temperature and on atmospheric humidity. The curing rate can be accelerated by heat exposure or exposure to carbon dioxide concentration above 1% p.b.v.
Uncured or partially cured silicone can be removed by help of organic solvents such as alipatic or aromatic hydrocarboncleaning should take place before the rubber is fully cured. Once completely cured, only mechanical removal supported by prior solvent swell is possible. Swelling can be accelerated by elevated temperature.
Detailed processing instructions are given in our brochure “ROOM TEMPERATURE VULCANIZING (RTV) SILICONES - MATERIAL AND PROCESSING GUIDELINES
We recommend running preliminary tests to optimize conditions for the particular application.
Lagerung
Vertrieb & Support
0001 Dubai
阿拉伯联合酋长国
+971 4 709-9911 (Fax)
Wie können wir Ihnen helfen?
- Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.