WACKER SilGel® 631 A/B

WACKER SilGel® 631 A/B is a pourable, addition-curing, RTV-2 silicone rubber that was developed for offshore seismic streamer applications. It cures at room temperature to a very soft silicone gel.


特性

  • two-part, 1:1 mix ratio
  • low viscosity
  • rapid heat cure
  • slow cure time at room temperature
  • very low hardness
  • clear and colorless

 

 

Processing
surface preparation
All surfaces must be clean and free of contaminants
that will inhibit the cure of WACKER SilGel® 631 A/B.
Examples of inhibiting contaminants are sulfur
containing materials, plasticizers, urethanes, amine
containing materials and organometallic compounds –
especially organotin compounds.
If a substrate’s ability to inhibit cure is unknown, a
small-scale test should be run to determine
compatibility.

mixing
Caution
Only components A and B with the same lot number
may be processed together!
Component B of WACKER SilGel® 631 A/B contains
the platinum catalyst, component A the crosslinker.
Even traces of the platinum catalyst may cause gelling
of the component containing the crosslinker.
The two components should be thoroughly mixed at a 1 : 1 ratio by weight or volume.
To eliminate any air introduced during dispensing or
trapped under components or devices a vacuum encapsulation
is recommended.

curing
Curing time of addition curing silicone rubber is highly dependent on temperature, size and heat sink properties of the component being potted.

储存

The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

 

销售和支持

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
美国
+1  888  922-5374 （电话）
Contact Sales

我们可以为您提供什么帮助？

  • 您在选择产品方面需要帮助或者需要技术咨询？ 请联系我们的专家
Ask a question

您是否需要产品样本？

您可以在此处索取产品样本。

索取样本

更多产品

个产品 技术数据
动态粘度 锥入度
WACKER SilGel® 612 A/B 1000 mPa·s[1] 1000 mPa·s[1] 300 1/10mm[3] 300 1/10mm[3]
WACKER SilGel® 613 - - 70 1/10mm[4] 70 1/10mm[4]
WACKER SilGel® 616 A/B 300 mPa·s[1] 300 mPa·s[1] 280.0 1/10mm[5] 280.0 1/10mm[5]
WACKER SilGel® 631 A/B 20 - 35 cP[2] 20 - 35 cP[2] 35[6] 35[6]
说明
[1] 动态粘度 | 25 °C | ISO 3219,  [2] 动态粘度 | 23 °C | ISO 3219,  [3] 锥入度 | DIN ISO 2137 | 150 g hollow cone, 1 min.,  [4] 锥入度 9.38克空心锥 | DIN ISO 2137,  [5] 锥入度 | DIN ISO 2137 | 150 g hollow cone, 60 sec.,  [6] 锥入度 | DIN ISO 2137 

购物车

我的媒体


转至订单表

联系方式

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
+1  888  922-5374 （电话）

收藏夹

我的产品