Our system has noticed that you are based in United States, but the current country setting is France. Do you still want to change your country?

Electronics

Room-temperature vulcanizing silicone elastomers from WACKER reliably protect against external influences, which ensures the functional safety of electrical and electronic components. As one of the world’s leading silicone manufacturers with many years of experience, WACKER is a competent partner of the industry and offers tailor-made solutions for potting, bonding, sealing and coating.

Main Properties:

  • For applications in closed housings
  • Low modulus of elasticity (10 – 100 kPa)
  • Damping of thermomechanical stress
  • Broad range of application temperatures (-45 to +180 °C)
  • Superior reliability
  • Low ion levels
  • Low bleeding
  • Tailor-made processing properties for fast mass production
  • Room-temperature or heat curing (one-component)
  • Self-leveling and thixotropic gels
  • Adhesion to various substrates due to inherent tack

Soft Gel Applications:

  • Sensitive electronic components
  • ECUs
  • Power modules
  • Discrete devices (glob tops)
  • Sensors
  • Displays
  • Bonded ICs

Tough Gel Applications:

  • Voltage regulators
  • Transformer potting
  • Coil potting
  • Junction boxes for PV applications

产品推荐

表格可上下滚动
个产品
技术数据
Product properties
动态粘度 Dropping period 锥入度 监管 交联性能 硫化胶
ELASTOSIL® CAT UV 1000 mPa·s[1] 1000 mPa·s[1] ≥ 1 d[7] ≥ 1 d[7] - - - - -
ELASTOSIL® RT 745 "S" A/B 1000 mPa·s[2] 1000 mPa·s[2] - - - - - - -
ELASTOSIL® RT 745 T A/B 1000 mPa·s[3] 1000 mPa·s[3] - - - - - - -
ELASTOSIL® RT 745 T A/B KR 1000 mPa·s[3] 1000 mPa·s[3] - - - - - - -
ELASTOSIL® RT 745 T A/B KR 1000 mPa·s[3] 1000 mPa·s[3] - - - - - - -
SEMICOSIL® 911 A/B 8000 mPa·s[4] 8000 mPa·s[4] - - - - 低挥发 双组分, 加成固化 离子含量少
SEMICOSIL® 9242 20000 mPa·s[5] 20000 mPa·s[5] - - - - - - -
SEMICOSIL® 950 UV B 1000 mPa·s[6] 1000 mPa·s[6] - - - - - - -
WACKER SilGel® 612 A/B 1000 mPa·s[1] 1000 mPa·s[1] - - 300 1/10mm[8] 300 1/10mm[8] - - -
WACKER SilGel® 613 - - - - 70 1/10mm[9] 70 1/10mm[9] - - -
WACKER SilGel® 616 A/B 300 mPa·s[1] 300 mPa·s[1] - - 280.0 1/10mm[10] 280.0 1/10mm[10] - - -
说明
[1] 动态粘度 | 25 °C | ISO 3219,  [2] 动态粘度 | 23 °C | ISO 3219,  [3] 动态粘度 | ISO 3219,  [4] Viscosity A [D=0,5 s⁻¹] | 25 °C | DIN EN ISO 3219,  [5] Viscosity, D=0.5 1/s | 25 °C | ISO 3219,  [6] 动态粘度 | DIN EN ISO 3219 | A: SEMICOSIL® 949 UV A; B: SEMICOSIL® 950 UV B,  [7] Dropping period | Typical Value for 25°C for which doubling of mix viscosity in static mixing tube is referred to, [not exposed to UV light or ambient light, depending on addition curing silicone grade]; No processing with premix recommended,  [8] 锥入度 | DIN ISO 2137 | 150 g hollow cone, 1 min.,  [9] 锥入度 9.38克空心锥 | DIN ISO 2137,  [10] 锥入度 | DIN ISO 2137 | 150 g hollow cone, 60 sec.,  [] 适合,  [] 非常适合,  [] 极其适合 

Benefits:

  • Soft gels (encapsulation)
  • Low and high temperature grades
  • Elastic adhesives
  • Efficient mass production processes using fast heat-curing adhesives at moderate temperatures
  • Thermally conductive gap fillers, adhesives, pastes and encapsulants (0.5 – 4 W/mK)
  • Low-temperature grades allow applications down to -45 °C and high-temperature grades up to +210 °C

Applications:

  • Sealing of electronic control units and housings
  • Protection of electronic components by potting or encapsulating
  • Bonding of hybrid PCBs
  • Sealing/bonding of housing components (CIPG, FIPG and preformed gaskets)
  • Coating or bonding of individual elements (e.g. MEMS)
  • Thermal management solutions such as bonding to heat sinks, encapsulants and gap fillers

Benefits:

  • Excellent resistance at temperatures ranging from -50 °C to +180 °C; for special types, from -110 °C +220 °C
  • Very good adhesion to a wide variety of substrates
  • Excellent weathering and UV resistance
  • Outstanding dielectric properties that barely change over a wide temperature and frequency range
  • No corrosive components
  • Excellent environmental compatibility
  • Water-repellent and low moisture absorption
  • Excellent vibration damping
  • High chemical purity

Applications:

  • Coating and encapsulation of sensitive components (measuring instruments, system control)
  • Coating of selected areas of a component
  • Sealing of sensor elements
  • Sealing of housing components
  • Sealing of MEMS microphones and speakers
  • Corrosion protection, pressure compensation and vibration damping for electromechanical sensor elements

产品推荐

表格可上下滚动
个产品
技术数据
Product properties
动态粘度 Shore density A Breaking strength 断裂伸长率 Tear-growth resistance Dropping period 锥入度 监管 流变性 交联性能 硫化胶
ELASTOSIL® CAT UV 1000 mPa·s[1] 1000 mPa·s[1] - - - - - - - - ≥ 1 d[11] ≥ 1 d[11] - - - - - -
ELASTOSIL® N 2010 10.000 mPa·s[2] 10.000 mPa·s[2] 25[12] 25[12] 1 N/mm²[15] 1 N/mm²[15] 200 %[19] 200 %[19] - - - - - - - 剪切变稀, 自流平 - -
ELASTOSIL® N 2034 30000 mPa·s[3] 30000 mPa·s[3] 35[12] 35[12] 2 N/mm²[15] 2 N/mm²[15] 200 %[19] 200 %[19] - - - - - - 阻燃性 - - -
ELASTOSIL® N 2199 950000 mPa·s[4] 950000 mPa·s[4] 30[12] 30[12] 2.5 N/mm²[15] 2.5 N/mm²[15] 400 %[19] 400 %[19] 6.5 N/mm[24] 6.5 N/mm[24] - - - - - 抗下垂 - -
ELASTOSIL® N9111 GREY 1000000 mPa·s[5] 1000000 mPa·s[5] 30[12] 30[12] 2.2 N/mm²[15] 2.2 N/mm²[15] 500 %[20] 500 %[20] 10 N/mm[25] 10 N/mm[25] - - - - - 抗下垂, 触变 - -
ELASTOSIL® N9111 WHITE 900000 mPa·s[4] 900000 mPa·s[4] 30[12] 30[12] 2.20 N/mm²[15] 2.20 N/mm²[15] 500 %[20] 500 %[20] 10 N/mm[25] 10 N/mm[25] - - - - 阻燃性 抗下垂, 触变 - -
ELASTOSIL® RT 601 A/B 5000 mPa·s[6] 5000 mPa·s[6] 45[12] 45[12] 6 N/mm²[16] 6 N/mm²[16] 100 %[21] 100 %[21] - - - - - - - 易流动的 双组分, 加成固化 高透明度
ELASTOSIL® RT 713 - - - - - - - - - - - - - - - 抗下垂 高温下快速固化, 单组分, 加成固化 泡沫, 可压缩
ELASTOSIL® RT 745 "S" A/B 1000 mPa·s[6] 1000 mPa·s[6] - - - - - - - - - - - - - - - -
ELASTOSIL® RT 745 A/B 1000 mPa·s[6] 1000 mPa·s[6] 15[12] 15[12] - - - - - - - - - - - - 双组分, 加成固化 -
SEMICOSIL® 9242 20000 mPa·s[7] 20000 mPa·s[7] - - - - - - - - - - - - - - - -
SEMICOSIL® 950 UV B 1000 mPa·s[8] 1000 mPa·s[8] - - - - - - - - - - - - - - - -
SEMICOSIL® 987 GR 350000 mPa·s[9] 350000 mPa·s[9] 50[13] 50[13] 5 N/mm²[17] 5 N/mm²[17] 200 %[22] 200 %[22] - - - - - - - - - -
SEMICOSIL® 988/1K GREY 440000.0 mPa·s[10] 440000.0 mPa·s[10] 35[14] 35[14] 4.5 N/mm²[18] 4.5 N/mm²[18] 350 %[23] 350 %[23] - - - - - - - - - -
WACKER SilGel® 613 - - - - - - - - - - - - 70 1/10mm[26] 70 1/10mm[26] - - - -
说明
[1] 动态粘度 | 25 °C | ISO 3219,  [2] 动态粘度 | 25 1/s | ISO 3219,  [3] 动态粘度 (D = 0.5 1/s) | 25 °C | DIN EN ISO 3219,  [4] 动态粘度 D = 0,5 1/s | 25 °C | DIN EN ISO 3219,  [5] 动态粘度 D = 0.5 1/s | 25 °C | DIN EN ISO 3219,  [6] 动态粘度 | 23 °C | ISO 3219,  [7] Viscosity, D=0.5 1/s | 25 °C | ISO 3219,  [8] 动态粘度 | DIN EN ISO 3219 | A: SEMICOSIL® 949 UV A; B: SEMICOSIL® 950 UV B,  [9] 动态粘度 (D = 0.5 1/s) | 25 °C | ISO 3219,  [10] 动态粘度 (D = 0.5 1/s) | 25.0 °C | ISO 3219,  [11] Dropping period | Typical Value for 25°C for which doubling of mix viscosity in static mixing tube is referred to, [not exposed to UV light or ambient light, depending on addition curing silicone grade]; No processing with premix recommended,  [12] Shore density A | DIN ISO 48-4,  [13] Shore density A | ASTM D 2240,  [14] Shore density A | ASTM D 2240 | Measured at 23°C; Cured for 30 min at 150°C in a circulating oven,  [15] Breaking strength | ISO 37 | Type 3 / 23°C / 2mm,  [16] Breaking strength | ISO 37 type 1,  [17] Breaking strength | DIN 53504 S2,  [18] Breaking strength | DIN 53504 S2 | measured at 23°C on pressed sheet 165°C/15 min,  [19] 断裂伸长率 | ISO 37,  [20] 断裂伸长率 | ISO 37 | Type 3 / 23°C / 2mm,  [21] 断裂伸长率 | ISO 37 type 1,  [22] 断裂伸长率 | DIN 53504 S2,  [23] 断裂伸长率 | DIN 53504 S2 | measured at 23°C on pressed sheet 165°C/15 min,  [24] Tear-growth resistance | ASTM D 624 B,  [25] Tear-growth resistance | ASTM D 624 B | 23°C / 2mm,  [26] 锥入度 9.38克空心锥 | DIN ISO 2137,  [] 适合,  [] 非常适合,  [] 极其适合 

Benefits:

  • High reliability – excellent for harsh testing conditions
  • Low shrinkage (< 0.1 %, before/after cure)
  • Mura-free
  • Extremely low modulus (10 kPa – 200 kPa)
  • Superior optical reliability/precision (after aging)
  • Solutions for all relevant industrial application processes (dam & fill, dispensing, slot-die coating, screen printing, stencil printing)
  • Fast processing (UV-active grades)
  • Low elastic modulus – better for one glass solution (OGS), wide temperature range
  • Low dielectric constant (2.7 – 2.8)
  • Easy to rework and cost-saving
  • Broad range of processing parameters
  • No oxygen inhibition
  • No photo-initiators used

Applications:

  • Optical bonding/laminating of touchscreens
  • Encapsulation of optical and electronic components
  • Production of damping elements
  • Large-format displays
  • Displays inside a vehicle

Produktempfehlungen

Tabelle ist scrollbar
Produkte
Technische Daten
Produktmerkmale
dynamische Viskosität Weiterreißwiderstand Topfzeit Härte Shore A Härte Shore 00 Reißfestigkeit Reißdehnung Rheologie Vernetzungseigenschaft Vulkanisat
LUMISIL® 010 A/B - - - - - - - - - - - - - - Fließfähig Schnelle Aushärtung unter Hitze, kein chemischer Schrumpf, zweikomponentig, Additionsvernetzend hochtransparent
LUMISIL® 010 LP A/B - - - - - - - - - - - - - - Fließfähig Schnelle Aushärtung unter Hitze, kein chemischer Schrumpf, zweikomponentig, Additionsvernetzend hochtransparent
LUMISIL® 015FC A/B - - - - - - - - - - - - - - Fließfähig Schnelle Aushärtung unter Hitze, schnelle Aushärtung bei moderaten Temperaturen, kein chemischer Schrumpf, zweikomponentig, Additionsvernetzend hochtransparent
LUMISIL® 100 A/B - - - - - - - - - - - - - - Fließfähig Schnelle Aushärtung unter Hitze, schnelle Aushärtung bei moderaten Temperaturen, kein chemischer Schrumpf, zweikomponentig, Additionsvernetzend hochtransparent
LUMISIL® 100 OD A/B - - - - - - - - - - - - - - Fließfähig Schnelle Aushärtung unter Hitze, kein chemischer Schrumpf, zweikomponentig, Additionsvernetzend hochtransparent
LUMISIL® 101 A/B - - - - - - - - - - - - - - Fließfähig Schnelle Aushärtung unter Hitze, schnelle Aushärtung bei moderaten Temperaturen, kein chemischer Schrumpf, zweikomponentig, Additionsvernetzend hochtransparent
LUMISIL® 101 FC A/B - - - - - - - - - - - - - - Fließfähig Schnelle Aushärtung unter Hitze, schnelle Aushärtung bei moderaten Temperaturen, kein chemischer Schrumpf, zweikomponentig, Additionsvernetzend, Schnelle Aushärtung bei Raumtemperatur hochtransparent
LUMISIL® 101RT A/B - - - - - - - - - - - - - - Fließfähig Schnelle Aushärtung unter Hitze, schnelle Aushärtung bei moderaten Temperaturen, kein chemischer Schrumpf, zweikomponentig, Additionsvernetzend, Schnelle Aushärtung bei Raumtemperatur hochtransparent
LUMISIL® 102 A/B - - - - - - - - - - - - - - Fließfähig Schnelle Aushärtung unter Hitze, zweikomponentig, Additionsvernetzend hochtransparent
LUMISIL® 102FC A/B 2000 mPa·s[1] 2000 mPa·s[1] - - - - - - 40 - 60[5] 40 - 60[5] - - - - Fließfähig Schnelle Aushärtung unter Hitze, zweikomponentig, Additionsvernetzend hochtransparent
LUMISIL® 103 HT A/B - - - - - - - - 45 - 65[6] 45 - 65[6] - - - - Fließfähig Schnelle Aushärtung unter Hitze, schnelle Aushärtung bei moderaten Temperaturen, kein chemischer Schrumpf, zweikomponentig, Additionsvernetzend hochtransparent
LUMISIL® 105 A/B - - - - - - - - - - - - - - - Schnelle Aushärtung unter Hitze, zweikomponentig, Additionsvernetzend -
LUMISIL® 105 FC A/B - - - - - - - - - - - - - - Fließfähig Schnelle Aushärtung unter Hitze, schnelle Aushärtung bei moderaten Temperaturen, kein chemischer Schrumpf, zweikomponentig, Additionsvernetzend hochtransparent
LUMISIL® 105 HP A/B - - - - - - - - - - - - - - Fließfähig Schnelle Aushärtung unter Hitze, zweikomponentig, Additionsvernetzend hochtransparent
LUMISIL® 108 A/B - - - - - - - - - - - - - - Fließfähig Schnelle Aushärtung unter Hitze, schnelle Aushärtung bei moderaten Temperaturen, kein chemischer Schrumpf, zweikomponentig, Additionsvernetzend hochtransparent
LUMISIL® 201 FLEX UV A/B - - - - - - - - - - - - - - Fließfähig kein chemischer Schrumpf, zweikomponentig, UV-vernetzend, Additionsvernetzend hochtransparent
LUMISIL® 202 UV A/B - - - - - - - - - - - - - - Fließfähig kein chemischer Schrumpf, zweikomponentig, UV-vernetzend, Additionsvernetzend hochtransparent
LUMISIL® 203 FLEX UV A/B - - - - - - - - - - - - - - Fließfähig kein chemischer Schrumpf, zweikomponentig, UV-vernetzend, Additionsvernetzend hochtransparent
LUMISIL® 203 Gel UV A/B - - - - - - - - - - - - - - Fließfähig kein chemischer Schrumpf, zweikomponentig, UV-vernetzend, Additionsvernetzend hochtransparent
LUMISIL® 203 IM UV A/B - - - - - - - - - - ≥ 0.15 MPa ≥ 0.15 MPa ≥ 550 % ≥ 550 % Fließfähig kein chemischer Schrumpf, zweikomponentig, UV-vernetzend, Additionsvernetzend hochtransparent
LUMISIL® 203 UV A - - - - - - - - - - - - - - Fließfähig kein chemischer Schrumpf, zweikomponentig, UV-vernetzend, Additionsvernetzend hochtransparent
LUMISIL® 203 UV P A/B - - - - - - - - - - - - - - Fließfähig kein chemischer Schrumpf, zweikomponentig, UV-vernetzend, Additionsvernetzend hochtransparent
LUMISIL® 205 FLEX UV A/B - - - - - - - - - - - - - - Fließfähig kein chemischer Schrumpf, zweikomponentig, UV-vernetzend, Additionsvernetzend hochtransparent
LUMISIL® 205 Gel UV A/B - - - - - - - - - - - - - - Fließfähig kein chemischer Schrumpf, zweikomponentig, UV-vernetzend, Additionsvernetzend hochtransparent
LUMISIL® 205 UV A/B - - - - - - - - - - - - - - Fließfähig kein chemischer Schrumpf, zweikomponentig, UV-vernetzend, Additionsvernetzend hochtransparent
LUMISIL® 206 IM UV A/B - - - - - - - - - - - - ≥ 600 % ≥ 600 % Fließfähig kein chemischer Schrumpf, zweikomponentig, UV-vernetzend, Additionsvernetzend hochtransparent
LUMISIL® 210 UV A/B - - - - - - - - - - - - - - Fließfähig kein chemischer Schrumpf, zweikomponentig, UV-vernetzend, Additionsvernetzend hochtransparent
LUMISIL® 245 GEL FLEX UV A/B 60000 - 70000 mPa·s[2] 60000 - 70000 mPa·s[2] - - - - - - - - - - - - - kein chemischer Schrumpf, zweikomponentig, UV-vernetzend, Additionsvernetzend -
LUMISIL® 245 GEL UV A/B 60000 - 70000 mPa·s[3] 60000 - 70000 mPa·s[3] - - - - - - - - - - - - Fließfähig kein chemischer Schrumpf, zweikomponentig, UV-vernetzend, Additionsvernetzend hochtransparent
LUMISIL® 245 UV A/B - - - - - - - - - - - - - - Fließfähig kein chemischer Schrumpf, zweikomponentig, UV-vernetzend, Additionsvernetzend hochtransparent
LUMISIL® 245 UV P - - - - - - - - - - - - - - Fließfähig kein chemischer Schrumpf, zweikomponentig, UV-vernetzend, Additionsvernetzend hochtransparent
LUMISIL® 307 IM UV A/B - - - - - - - - - - - - - - Fließfähig kein chemischer Schrumpf, zweikomponentig, UV-vernetzend, Additionsvernetzend hochtransparent
LUMISIL® 307 UV DAM A/B - - - - - - - - - - - - - - - kein chemischer Schrumpf, zweikomponentig, UV-vernetzend, Additionsvernetzend hochtransparent
LUMISIL® 307 UV P A/B - - - - - - - - - - - - - - - kein chemischer Schrumpf, zweikomponentig, UV-vernetzend, Additionsvernetzend hochtransparent
LUMISIL® 3350 UV 1K - - - - - - - - - - - - - - Fließfähig kein chemischer Schrumpf, zweikomponentig, UV-vernetzend, Additionsvernetzend hochtransparent
LUMISIL® 402 IM UV A/B - - - - - - 15 15 - - - - - - Fließfähig kein chemischer Schrumpf, zweikomponentig, UV-vernetzend, Additionsvernetzend hochtransparent
LUMISIL® 402 UV A/B - - - - - - 27 27 - - - - - - - kein chemischer Schrumpf, zweikomponentig, UV-vernetzend, Additionsvernetzend hochtransparent
LUMISIL® 403 IM UV A/B - - - - - - 20 20 - - - - - - Fließfähig kein chemischer Schrumpf, zweikomponentig, UV-vernetzend, Additionsvernetzend hochtransparent
LUMISIL® 405 IM UV A/B - - - - - - 55[10] 55[10] - - - - - - Fließfähig kein chemischer Schrumpf, zweikomponentig, UV-vernetzend, Additionsvernetzend hochtransparent
LUMISIL® 409 UV A/B - - - - - - 45 45 - - - - - - Fließfähig kein chemischer Schrumpf, zweikomponentig, UV-vernetzend, Additionsvernetzend hochtransparent
SEMICOSIL® 811 350000 mPa·s[4] 350000 mPa·s[4] 8 N/mm[12] 8 N/mm[12] - - 30 30 - - 3 N/mm²[7] 3 N/mm²[7] 300 %[9] 300 %[9] - - -
SEMICOSIL® 821 UV A - - - - - - - - - - - - - - standfest zweikomponentig, UV-vernetzend, Additionsvernetzend -
SEMICOSIL® 823 UV A - - - - - - - - - - - - - - standfest zweikomponentig, UV-vernetzend, Additionsvernetzend -
SEMICOSIL® 827 UV A - - - - - - - - - - - - - - standfest zweikomponentig, UV-vernetzend, Additionsvernetzend -
SEMICOSIL® 830 A/B - - - - 15 - 25 min[13] 15 - 25 min[13] (± 5) 30[11] (± 5) 30[11] - - 2 - 5 MPa[8] 2 - 5 MPa[8] - - standfest Schnelle Aushärtung unter Hitze, zweikomponentig, Additionsvernetzend -
SEMICOSIL® 831 A/B - - - - - - (± 5) 60[11] (± 5) 60[11] - - - - - - - Schnelle Aushärtung unter Hitze, kein chemischer Schrumpf, zweikomponentig, Additionsvernetzend hochtransparent
SEMICOSIL® 832 A/B - - - - - - - - - - - - - - standfest schnelle Aushärtung bei moderaten Temperaturen, kein chemischer Schrumpf, zweikomponentig, Additionsvernetzend, Schnelle Aushärtung bei Raumtemperatur -
SEMICOSIL® 832 A/B - - - - 15 - 25 min[13] 15 - 25 min[13] (± 5) 50[11] (± 5) 50[11] - - 7 - 10 MPa[8] 7 - 10 MPa[8] - - standfest Schnelle Aushärtung unter Hitze, zweikomponentig, Additionsvernetzend -
Legend
[1] Viscosity | 25 °C | 10 1/s ,  [2] Viscosity | 25 °C | 10 1/s | ISO 3219,  [3] Viscosity | 25 °C | ISO 3219,  [4] dynamische Viskosität D=0.5 s⁻¹ | 25,0 °C | ISO 3219,  [5] Hardness (Penetration, 9.38g hollow cone) | Cured for 1 hr at 65'C in a circulating air oven,  [6] Hardness (Penetration, 9.38g hollow cone) | Cure condition: 60'C, 1hr,  [7] Reißfestigkeit | DIN 53504 S2 | measured@25°C on pressed sheet 165°C/15 min,  [8] Reißfestigkeit | DIN ISO 37,  [9] Reißdehnung | DIN 53504 S2 | measured@25°C on pressed sheet 165°C / 15 min,  [10] Härte Shore A | DIN 53505,  [11] Härte Shore A | ASTM D 2240 Type A,  [12] Weiterreißwiderstand | DIN 53504 S 2 / ISO 37,  [13] Topfzeit | Brookfield | Time to double viscosity up,  [] Geeignet,  [] Gut geeignet,  [] Ideal geeignet 

Main Properties:

  • Low-modulus sealing adhesives
  • Very good ability to bond
  • Flowable to non-sag
  • Sealing between cover/lids and housing
  • Pronounced damping properties
  • Broad temperature range (-45°C to +180°C)
  • Damping of thermomechanical stress
  • Maximum reliability and long-term performance
  • Tailor-made properties for efficient and fast production processes

Applications:

  • Electronic components
  • FIPG and CIPG applications
  • Housing and lids made from PBT, PA and aluminum
  • Suitable for automated processes

Produktempfehlungen

Tabelle ist scrollbar
Produkte
Technische Daten
Produktmerkmale
dynamische Viskosität Härte Shore A Reißfestigkeit Reißdehnung Weiterreißwiderstand Topfzeit Beständigkeit Regulatorisch Rheologie Vernetzungseigenschaft Vulkanisat
ELASTOSIL® A234 WHITE 25000 mPa·s[4] 25000 mPa·s[4] 35[14] 35[14] 2.5 N/mm²[19] 2.5 N/mm²[19] 200 %[27] 200 %[27] 3.5 N/mm[1] 3.5 N/mm[1] - - hitzebeständig - - - -
ELASTOSIL® A33 IVORY 1000000 mPa·s[5] 1000000 mPa·s[5] 28[14] 28[14] 2.5 N/mm²[19] 2.5 N/mm²[19] 300 %[27] 300 %[27] 7.8 N/mm[2] 7.8 N/mm[2] - - ölbeständig - standfest - -
ELASTOSIL® A59 GRAY 40000 mPa·s[6] 40000 mPa·s[6] 20[14] 20[14] 1.2 N/mm²[19] 1.2 N/mm²[19] 300 %[27] 300 %[27] 3.0 N/mm[1] 3.0 N/mm[1] - - ölbeständig, hitzebeständig - Selbstnivellierend - -
ELASTOSIL® E14 Red - - 32[14] 32[14] 2.5 N/mm²[19] 2.5 N/mm²[19] 400 %[27] 400 %[27] 7 N/mm[1] 7 N/mm[1] - - hitzebeständig MIL-A 46106 Type standfest - -
ELASTOSIL® E4 - - 15[14] 15[14] 2 N/mm²[20] 2 N/mm²[20] 750 %[28] 750 %[28] 7.3 N/mm[1] 7.3 N/mm[1] - - - - standfest - -
ELASTOSIL® E43 BLACK 250000 mPa·s[4] 250000 mPa·s[4] 30[14] 30[14] 6.5 N/mm²[21] 6.5 N/mm²[21] 500 %[29] 500 %[29] 11.5 N/mm[1] 11.5 N/mm[1] - - - lösemittelfrei - - -
ELASTOSIL® E43 N TRANSPARENT - - 30[14] 30[14] 7.8 N/mm²[19] 7.8 N/mm²[19] 450 %[27] 450 %[27] - - - - - - thixotropierend - -
ELASTOSIL® E43 TRANSPARENT 250000 mPa·s[7] 250000 mPa·s[7] 30[14] 30[14] 6.50 N/mm²[20] 6.50 N/mm²[20] 500 %[28] 500 %[28] 11.5 N/mm[1] 11.5 N/mm[1] - - - lösemittelfrei - - -
ELASTOSIL® E47 TRANSPARENT 600000 mPa·s[8] 600000 mPa·s[8] 37[14] 37[14] 4.5 N/mm²[21] 4.5 N/mm²[21] 450 %[29] 450 %[29] 10 N/mm[1] 10 N/mm[1] - - - MIL-A 46106 Type standfest, thixotropierend - -
ELASTOSIL® E50 N TRANSPARENT - - 35[14] 35[14] 2.6 N/mm²[19] 2.6 N/mm²[19] 200 %[27] 200 %[27] - - - - - MIL-A 46106 Type - - -
ELASTOSIL® N 2034 30000 mPa·s[9] 30000 mPa·s[9] 35[14] 35[14] 2 N/mm²[22] 2 N/mm²[22] 200 %[30] 200 %[30] - - - - - schwer entflammbar - - -
ELASTOSIL® N 2189 250000 mPa·s[8] 250000 mPa·s[8] 45[14] 45[14] 1.5 N/mm²[22] 1.5 N/mm²[22] 200 %[30] 200 %[30] 5.0 N/mm[1] 5.0 N/mm[1] - - ölbeständig, hitzebeständig schwer entflammbar standfest - -
ELASTOSIL® N 2199 950000 mPa·s[4] 950000 mPa·s[4] 30[14] 30[14] 2.5 N/mm²[22] 2.5 N/mm²[22] 400 %[30] 400 %[30] 6.5 N/mm[1] 6.5 N/mm[1] - - - - standfest - -
ELASTOSIL® N9111 BLACK 1000000 mPa·s[8] 1000000 mPa·s[8] 30[14] 30[14] 2.0 N/mm²[22] 2.0 N/mm²[22] 450 %[31] 450 %[31] 8.5 N/mm[2] 8.5 N/mm[2] - - - schwer entflammbar standfest, thixotropierend - -
ELASTOSIL® N9111 GREY 1000000 mPa·s[8] 1000000 mPa·s[8] 30[14] 30[14] 2.2 N/mm²[22] 2.2 N/mm²[22] 500 %[31] 500 %[31] 10 N/mm[2] 10 N/mm[2] - - - - standfest, thixotropierend - -
ELASTOSIL® N9111 WHITE 900000 mPa·s[4] 900000 mPa·s[4] 30[14] 30[14] 2.20 N/mm²[22] 2.20 N/mm²[22] 500 %[31] 500 %[31] 10 N/mm[2] 10 N/mm[2] - - - schwer entflammbar standfest, thixotropierend - -
ELASTOSIL® N9189 - - 45[14] 45[14] 2.8 N/mm²[19] 2.8 N/mm²[19] 330 %[27] 330 %[27] - - - - hitzebeständig - Scherverdünnend, standfest - -
ELASTOSIL® RT 624 "4S" A/B VS 60000 mPa·s[8] 60000 mPa·s[8] - - - - - - - - - - - - - - -
SEMICOSIL® 811 350000 mPa·s[10] 350000 mPa·s[10] 30 30 3 N/mm²[23] 3 N/mm²[23] 300 %[32] 300 %[32] 8 N/mm[3] 8 N/mm[3] - - - - - - -
SEMICOSIL® 821 UV A - - - - - - - - - - - - - - standfest zweikomponentig, UV-vernetzend, Additionsvernetzend -
SEMICOSIL® 823 UV A - - - - - - - - - - - - - - standfest zweikomponentig, UV-vernetzend, Additionsvernetzend -
SEMICOSIL® 827 UV A - - - - - - - - - - - - - - standfest zweikomponentig, UV-vernetzend, Additionsvernetzend -
SEMICOSIL® 830 A/B - - (± 5) 30[15] (± 5) 30[15] 2 - 5 MPa[24] 2 - 5 MPa[24] - - - - 15 - 25 min[35] 15 - 25 min[35] - - standfest Schnelle Aushärtung unter Hitze, zweikomponentig, Additionsvernetzend -
SEMICOSIL® 831 A/B - - (± 5) 60[15] (± 5) 60[15] - - - - - - - - - - - Schnelle Aushärtung unter Hitze, kein chemischer Schrumpf, zweikomponentig, Additionsvernetzend hochtransparent
SEMICOSIL® 832 A/B - - - - - - - - - - - - - - standfest schnelle Aushärtung bei moderaten Temperaturen, kein chemischer Schrumpf, zweikomponentig, Additionsvernetzend, Schnelle Aushärtung bei Raumtemperatur -
SEMICOSIL® 832 A/B - - (± 5) 50[15] (± 5) 50[15] 7 - 10 MPa[24] 7 - 10 MPa[24] - - - - 15 - 25 min[35] 15 - 25 min[35] - - standfest Schnelle Aushärtung unter Hitze, zweikomponentig, Additionsvernetzend -
SEMICOSIL® 986/1K 300000 mPa·s[11] 300000 mPa·s[11] 51[16] 51[16] 5 N/mm²[25] 5 N/mm²[25] 200 %[33] 200 %[33] 8 N/mm[1] 8 N/mm[1] - - - - - - -
SEMICOSIL® 987 GR 350000 mPa·s[11] 350000 mPa·s[11] 50[17] 50[17] 5 N/mm²[25] 5 N/mm²[25] 200 %[33] 200 %[33] - - - - - - - - -
SEMICOSIL® 988/1K GREY 440000.0 mPa·s[12] 440000.0 mPa·s[12] 35[18] 35[18] 4.5 N/mm²[26] 4.5 N/mm²[26] 350 %[34] 350 %[34] - - - - - - - - -
SEMICOSIL® 989/1K 300000 mPa·s[13] 300000 mPa·s[13] 55[16] 55[16] 5 N/mm²[25] 5 N/mm²[25] 200 %[33] 200 %[33] - - - - - - - - -
Legend
[1] Weiterreißwiderstand | ASTM D 624 B,  [2] Weiterreißwiderstand | ASTM D 624 B | 23°C / 2mm,  [3] Weiterreißwiderstand | DIN 53504 S 2 / ISO 37,  [4] dynamische Viskosität D = 0,5 1/s | 25 °C | DIN EN ISO 3219,  [5] dynamische Viskosität | 25 °C | 0,5 1/s | DIN EN ISO 3219,  [6] dynamische Viskosität | 25 °C | DIN EN ISO 3219,  [7] D = 1/s | 25 °C | DIN EN ISO 3219,  [8] dynamische Viskosität D = 0.5 1/s | 25 °C | DIN EN ISO 3219,  [9] dynamische Viskosität (D = 0,5 1/s) | 25 °C | DIN EN ISO 3219,  [10] dynamische Viskosität D=0.5 s⁻¹ | 25,0 °C | ISO 3219,  [11] dynamische Viskosität (D = 0,5 1/s) | 25 °C | ISO 3219,  [12] dynamische Viskosität (D = 0,5 1/s) | 25,0 °C | ISO 3219,  [13] dynamische Viskosität (shear rate = 0,5 s⁻¹) | 25 °C | DIN EN ISO 3219,  [14] Härte Shore A | DIN ISO 48-4,  [15] Härte Shore A | ASTM D 2240 Type A,  [16] Härte Shore A | ISO 868,  [17] Härte Shore A | ASTM D 2240,  [18] Härte Shore A | ASTM D 2240 | Measured at 23°C; Cured for 30 min at 150°C in a circulating oven,  [19] Reißfestigkeit | ISO 37 Type 1,  [20] Reißfestigkeit | ISO 37 Type 1 | Type 3 / 23°C / 2mm,  [21] Reißfestigkeit | ISO 37 Type 1 | Type 3 /23°C / 2mm,  [22] Reißfestigkeit | ISO 37 | Type 3 / 23°C / 2mm,  [23] Reißfestigkeit | DIN 53504 S2 | measured@25°C on pressed sheet 165°C/15 min,  [24] Reißfestigkeit | DIN ISO 37,  [25] Reißfestigkeit | DIN 53504 S2,  [26] Reißfestigkeit | DIN 53504 S2 | measured at 23°C on pressed sheet 165°C/15 min,  [27] Reißdehnung | ISO 37 Type 1,  [28] Reißdehnung | ISO 37 Type 1 | Type 3 / 23°C / 2mm,  [29] Reißdehnung | ISO 37 Type 1 | Type 3 /23°C / 2mm,  [30] Reißdehnung | ISO 37,  [31] Reißdehnung | ISO 37 | Type 3 / 23°C / 2mm,  [32] Reißdehnung | DIN 53504 S2 | measured@25°C on pressed sheet 165°C / 15 min,  [33] Reißdehnung | DIN 53504 S2,  [34] Reißdehnung | DIN 53504 S2 | measured at 23°C on pressed sheet 165°C/15 min,  [35] Topfzeit | Brookfield | Time to double viscosity up,  [] Geeignet,  [] Gut geeignet,  [] Ideal geeignet 

UV-curing silicones offer UV-induced curing at room temperature thus enabling extremely short cycle times and increased line throughput, resulting in shorter production times and reduced energy costs.

Benefits:

  • High dielectric strength
  • Reliable dielectric insulation
  • Efficient production processes

Applications:

  • Power semiconductors
  • Generators
  • Automotive / e-mobility

Produktempfehlungen

Tabelle ist scrollbar
Produkte
Technische Daten
Produktmerkmale
dynamische Viskosität Härte Shore A Reißfestigkeit Reißdehnung Weiterreißwiderstand Topfzeit Penetration Härte Shore 00 Regulatorisch Vernetzungseigenschaft Vulkanisat
ELASTOSIL® CAT UV 1000 mPa·s[1] 1000 mPa·s[1] - - - - - - - - ≥ 1 d[9] ≥ 1 d[9] - - - - - - -
SEMICOSIL® 911 A/B 8000 mPa·s[2] 8000 mPa·s[2] - - - - - - - - - - - - - - niedriger Flüchtigengehalt zweikomponentig, Additionsvernetzend niedriger Ionengehalt
SEMICOSIL® 942 UV A/B 3300 mPa·s[2] 3300 mPa·s[2] - - - - - - - - - - - - - - - - -
SEMICOSIL® 949 UV A 150.0 mPa·s[3] 150.0 mPa·s[3] - - - - - - - - - - - - 40[10] 40[10] - - -
SEMICOSIL® 949 UV B 150.0 mPa·s[3] 150.0 mPa·s[3] - - - - - - - - - - - - 40[10] 40[10] - - -
SEMICOSIL® 950 UV B 1000 mPa·s[4] 1000 mPa·s[4] - - - - - - - - - - - - 40.0[11] 40.0[11] - - -
SEMICOSIL® 961 TC A/B 130000 mPa·s[5] 130000 mPa·s[5] - - - - - - - - - - - - 55[12] 55[12] - - -
SEMICOSIL® 986/1K 300000 mPa·s[6] 300000 mPa·s[6] 51[13] 51[13] 5 N/mm²[15] 5 N/mm²[15] 200 %[17] 200 %[17] 8 N/mm[19] 8 N/mm[19] - - - - - - - - -
SEMICOSIL® 988/1K GREY 440000.0 mPa·s[7] 440000.0 mPa·s[7] 35[14] 35[14] 4.5 N/mm²[16] 4.5 N/mm²[16] 350 %[18] 350 %[18] - - - - - - - - - - -
SEMICOSIL® 989/1K 300000 mPa·s[8] 300000 mPa·s[8] 55[13] 55[13] 5 N/mm²[15] 5 N/mm²[15] 200 %[17] 200 %[17] - - - - - - - - - - -
WACKER SilGel® 613 - - - - - - - - - - - - 70 1/10mm[20] 70 1/10mm[20] - - - - -
Legend
[1] dynamische Viskosität | 25 °C | ISO 3219,  [2] Viscosity A [D=0,5 s⁻¹] | 25 °C | DIN EN ISO 3219,  [3] dynamische Viskosität | 25,0 °C | DIN EN ISO 3219,  [4] dynamische Viskosität | DIN EN ISO 3219 | A: SEMICOSIL® 949 UV A; B: SEMICOSIL® 950 UV B,  [5] dynamische Viskosität Kegel-Platte-Viscosimeter Komponente A | 23 °C | ISO 3219, D = 10 1/s,  [6] dynamische Viskosität (D = 0,5 1/s) | 25 °C | ISO 3219,  [7] dynamische Viskosität (D = 0,5 1/s) | 25,0 °C | ISO 3219,  [8] dynamische Viskosität (shear rate = 0,5 s⁻¹) | 25 °C | DIN EN ISO 3219,  [9] Topfzeit | Typical Value for 25°C for which doubling of mix viscosity in static mixing tube is referred to, [not exposed to UV light or ambient light, depending on addition curing silicone grade]; No processing with premix recommended,  [10] Shore 00 | 23 °C | ASTM D 2240 | 10 sec 140 mW/cm² followed by 30 min 150°C,  [11] Härte Shore 00 | 23 °C | ASTM 2240 / Type 00 | Curing Conditions: 10 sec / 140 mW/cm2 followed by 30 min 150°C; measured@23°C,  [12] Härte Shore 00 | ASTM D 2240,  [13] Härte Shore A | ISO 868,  [14] Härte Shore A | ASTM D 2240 | Measured at 23°C; Cured for 30 min at 150°C in a circulating oven,  [15] Reißfestigkeit | DIN 53504 S2,  [16] Reißfestigkeit | DIN 53504 S2 | measured at 23°C on pressed sheet 165°C/15 min,  [17] Reißdehnung | DIN 53504 S2,  [18] Reißdehnung | DIN 53504 S2 | measured at 23°C on pressed sheet 165°C/15 min,  [19] Weiterreißwiderstand | ASTM D 624 B,  [20] Penetration Hohlkonus, 9.38 g | DIN ISO 2137,  [] Geeignet,  [] Gut geeignet,  [] Ideal geeignet