Dieser Inhalt ist für Pakistan bestimmt. Unser System hat erkannt, dass Sie aus USA kommen. Wollen Sie USA als neues Land setzen?

Dieses Produkt ist in Pakistan nicht verfügbar. Bitte nutzen Sie die Produktsuche oder kontaktieren Sie uns.

SILRES® BS 1803 A

$SILRES<sup>®</sup> BS 1803 A

SILRES® BS 1803 A is a stable, VOC compliant, 60% active silicone emulsion for reducing water uptake and producing visual beading while not blocking pores or capillaries of concrete substrates. SILRES® BS 1803 A is found to be particularly effective in applications that require beading and water uptake prevention at very low addition levels.

Intended uses include: Admixture for non-load bearing cement-based formulated products such as pre-cast products, blocks and pavers 

Additional usage is as a topical sealer for post-treatment of cement based formulated products


Properties

  • Excellent water repellency: reducing cracking, spalling, freeze / thaw damage, chemical degradation, efflorescence and dirt pick-up
  • Excellent beading for improved aesthetics
  • Low VOC emissions during curing
  • Minimizes darkening effects, maintaining the original substrates’ appearance
  • Minimal effect on adhesion of topcoats to the mineral substrate, improving the service life of the paint
  • Lengthens substrate life, reducing maintenance costs





  • Thoroughly mix SILRES® BS 1803 A prior to use to insure that the emulsion is homogeneous.
  • Tap water is acceptable for blending. Due to the chemical variables in tap water and in concrete formulas it is recommended that samples be tested for water repellency, beading and other performance parameters prior to commercial use.
  • Mixing time should be adjusted to insure thorough distribution of all components including SILRES® BS 1803 A.
  • Depending on curing conditions, water repellency can be seen after 24 hours and maximum water repellency is realized in about 72 hours. Beading generally improves over time however best results are noticed after 28 days.

Storage

The "Best use before end date" of each batch is shown on the Certificate of Analysis. Storage beyond the date specified on the Certificate of Analysis does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
USA
+1  888  922-5374 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Sie möchten ein Produktmuster?

Hier können Sie ein Produktmuster anfordern.

Muster anfordern

Mehr Produkte

Bitte wählen Sie eine Anwendung um Ihnen passende Produkte anzeigen zu können.

Order

My media


Go to order form

Sales Contact

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
+1  888  922-5374 (Phone)

My favorites

My products