This content is for United Kingdom. Our system has detected that you are from United States. Do you want to set United States as your new country?

SILPURAN® 2114 OT A/B

Two-component, addition-curing silicone composition curing to a soft silicone adhesive with high adhesive strength



Properties

  • biocompatible, certificates of compatibility with USP Class VI and ISO 10993 available on request
  • no by-products from curing process
  • medium viscosity, easily pourable
  • very good adhesion, typical value 3.5 N/2.5 cm (90° peel test, on stainless steel)
  • high transparency

Specific features of SILPURAN® 2114 OT A/B

  • Addition Curing
  • Biocompatible
  • Suitable for skin contact
  • Two-component

SILPURAN® 2114 OT A/B can be used as a skin adhesive in medical applications.

Components A and B of SILPURAN® 2114 A/B are mixed homogeneously in a ratio A : B = 1 : 1 and vulcanize rapidly at temperatures over 100 °C.

SILPURAN® 2114 A/B has good adhesive properties that can be adjusted to suit the relevant requirements:

Increasing the proportion of component A results in a softer vulcanisate and increased tackiness. Increasing the proportion of component B results in a harder vulcanisate and reduced tackiness.

Important note:
The platinum catalyst is contained in component A.

Caution:
Only components A and B with the same lot number may be processed together!

Storage

The 'Best use before end' date of each batch is shown on the product label.

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemicals Ltd.
2 Arlington Square, Downshire Way
Bracknell RG12 1WA
United Kingdom
+44  1344  401 670 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

More products

Products Technical data
Viscosity, dynamic Penetration
SILPURAN® 2100 A/B 34000 mPa·s[1] 34000 mPa·s[1] 205 1/10mm[2] 205 1/10mm[2]
SILPURAN® 2112 A/B 11600 mPa·s[1] 11600 mPa·s[1] 225 1/10mm[2] 225 1/10mm[2]
SILPURAN® 2114 A/B 12000 mPa·s[1] 12000 mPa·s[1] 200 1/10mm[2] 200 1/10mm[2]
SILPURAN® 2114 OT A/B 12000 mPa·s[1] 12000 mPa·s[1] 170 1/10mm[2] 170 1/10mm[2]
SILPURAN® 2117 A/B 33000 mPa·s[1] 33000 mPa·s[1] 205 1/10mm[2] 205 1/10mm[2]
SILPURAN® 2124 A/B 3200 mPa·s[1] 3200 mPa·s[1] 155 1/10mm[2] 155 1/10mm[2]
SILPURAN® 2130 A/B 1000 mPa·s[1] 1000 mPa·s[1] 220 1/10mm[2] 220 1/10mm[2]
Legend
[1] Viscosity, dynamic | DIN EN ISO 3219,  [2] Penetration | DIN ISO 2137 | hollow cone of 62.5 g, 60 s 

Order

My media


Sales Contact

Wacker Kimya Ticaret Limited Şirketi
Tevfik Fikret Cad. No: 32/4
34750 Ataşehir / Istanbul
+90  216  569-7050 (Phone)

My favorites

My products